Hybrid Eaton Fuller Gudbinta Babaca Code 116 – Babaca danab Relays Sare – (nidaamyada MY09)

Khalad code for Hybrid Eaton daydo Systems Drive (MY09) Cuneyso-8E406A-U / P, Cuneyso-8E406A-UP, Cuneyso-8E406A-UPG, Cuneyso-8E406A-CD, Cuneyso-8E406A-CDG, Cuneyso-8E406A-guud, Cuneyso-8E406A-T, Cuneyso-6E706B-CD, Cuneyso-6E706B-P iyo aad cuneyso-6E706B-UPG. Read hoose si aad u bartaan sida si ay u tijaabiso, nadiifiso iyo hagaajin qalad code qalad aad Freightliner, Mack, Peterbilt, Kenworth, Volvo, International, iyo gaari xamuul culus-waajib iyo qalabka. The Relays High-danab ku yaalaan gudaha Power ah
Electronics Carrier (PEC) ee unit Relay Box. There is one Pre-Charge Relay on the positive side, an additional relay on the positive, and on the negative for a total of three relays. Relays Kuwani caadi ahaan u furan yihiin marka nidaamka off waa. Relays waxaa gacanta ku dhex Inverter ah.

khalad Code 116 – Danab High Relays Babaca Ogaanshaha

The shuruud soo socda waa in la buuxiyaa ka hor inta nidaamka ogaadaa gardarrada:

  • danab suuroggalaan Inverter waa ka weyn yahay 7 volts iyo ka yar 16 volts.

Note: Marka dhib code ah Wax qabad la'aan tixraac ah Product Baarista Mode (PDM)

Xaaladaha in Calan Babaca Code Active

  • IMF 3 ayaa lagu wadaa markii gaaban ah si ay 12 volts la ogaado dhinaca gacanta ku Relay a high-voltage ah.
  • IMF 4 ayaa lagu wadaa markii gaaban ah in dhulka la ogaado dhinaca gacanta ku Relay a high-voltage ah.
  • IMF 5 iyo FMI 10 ayaa lagu wadaa markii circuit furan la ogaado dhinaca gacanta ku Relay a high-voltage ah.
  • IMF 7 iyo FMI 14 ayaa lagu wadaa markii Relay ugu weyn ee xun ku yahay iyo hoos u dhac inverter danab capacitor uu ka yar yahay 10-volts / 5 ilbiriqsi markii danab capacitor bilowga ahaa ka weyn tahay 200 volts.

Uugu Marka Babaca Code 116 ayaa lagu wadaa shuruudaha soo socda dhici:

  • Amber "Check Hybrid" illuminates light.
  • Gaf waxa lagu kaydiyaa Control Module Hybrid (Gudiga sare) xusuusta.
  • nidaamka hybrid wuxuu noqon doonaa offline.
  • Transmission defaults start gear to 1st in diesel-only mode.

Xaaladaha in Calan Babaca Code qabad la'aan

Kaliya unu firfircoonayn la nadiifiyay kartaa taariikhda TECU ama HCM isticmaalaya ServiceRanger. TECU ayaa si toos ah oo ansixiyay unu ka dib markii taariikhda 200 saacadood. Gudiga ayaa si toos ah oo ansixiyay Gaf taariikhda ka dib qalad in uu ahaa qabad la'aan 200 saacadood.

code qalad Tani waxaa keeni kara wax ka mid ah kuwan soo socda:

  • IMF 3, 4, 5, 7, 10, 14
    • Danab silig celinta ka DC / DC Converter in HCM
  • IMF 4
    • Relay Box
    • tiiro Switch
    • Inverter
    • Vehicle la habeeyo Fiilooyinka dhexeeya Inverter iyo PEC ah
    • Main High-danab Service Fiyuus Suurka ama ka maqan
    • DC High-danab Cable Interlock
    • PEC Switch Service Button Red

khalad Code 116 – Danab High Relays Babaca Test

Aqoonsiga Qeybta:

Duetsch 40-way mating connector view Inverter low-voltage connector

Duetsch 40-jidka isku xira view weheshiga
(Inverter isku xira low-danab)

Mating connector view Deutsch 19-way

Weheshiga view isku xira
(Deutsch 19-jidka isku xira)

FIIRO GAAR AH: U dir ka Eaton Qeybta Hybrid oo isku xira Location waayo, Goobaha isku xira in Systems MY09.

Inverter to PEC MY09 Systems

STEP 1.Verify FMIs joogo.

  1. Dib u eeg oo raaca digniinaha & ganaaxyada.
  2. Ceshano codes qalad Active iyo FMIs la ServiceRanger isticmaalaya Baarista 9-Jidka isku xira.
  3. Isticmaalka ServiceRanger, akhrinta Kitaabkiisa "Data Monitor" hoos Battery J1939 Data HV: Halbeegga 520250 HV Battery1 danab iman kara iyo dhimaya 520323 Battery danab RB. Daawo danab on RB Battery danab lagu jiro muhiim ah oo ku saabsan tallaabooyinka iyo record danab haddii wax ay joogaan.
  4. Waa kuwee FMIs joogaan?
    • Haddii Babaca Code 116 IMF 3 waxaa ku qoran, tag Tallaabada 2.
    • Haddii Babaca Code 116 IMF 4 waxaa ku qoran, tag Tallaabada 4.
    • Haddii Babaca Code 116 IMF 5 ama 10 waxaa ku qoran, tag Tallaabada 6.
    • Haddii Babaca Code 116 IMF 7 waxaa ku qoran, tag Tallaabada 13.

STEP 2. Hubi dayactirka.

  1. Key off, sugaan 1 daqiiqadii.
  2. Barkinta 40-Jidka isku xira Inverter.
  3. Key on (qabadsiin doonaa Code Babaca a 88, qalad cad ka dib markii dayactirka).
  4. On Vehicle la habeeyo, hubiyo danab kasta on biinanka 21, 31, 22, 32, 23 iyo 33 si ay dhulka:
    • Haddii danab kasta waxaa laga helaa, ka saar 19-Jidka isku xira on PEC iyo nusasaace for danab at Inverter 40-Pin, ka dibna tag Tallaabada 3.
    • Haddii danab wali waa la joogo, dayactirka Vehicle dhexeeya Inverter iyo 40-Pin, ka dibna tag Tallaabada 3.
    • Haddii danab waa jiheysteen, tag Tallaabada 3

STEP 3. Hubi sii wareeggeedii isku xira PEC dhulka.

  1. 1. Key off.
    2. Barkinta PEC 19-Jidka isku xira (Switch Service cas waa in weli la baxay).
    3. Cabir iska caabin ah oo ku saabsan soo socda boosteejada 19-Jidka isku xira:

    • pin 9 in Pin 6 iyo Pin 9 in Pin 12
    • pin 13 in Pin 6 iyo Pin 13 in Pin 12
    • pin 17 in Pin 6 iyo Pin 17 in Pin 12
      • Haddii circuit furan, tag Tallaabada 2.
      • Haddii wax iska caabin ah waxaa laga helaa, bedeli Box Relay ah, ka dibna tag Tallaabada 14.

STEP 4. Hubi sii wareeggeedii Inverter isku xira.

  1. Key off.
  2. Barkinta Inverter 40-Jidka isku xira (19-Isku xira Jidka at PEC waa in la xiran Switch Service cas baxay).
  3. On Vehicle la habeeyo, hubiyo caabiga dhulka on Pin 21 si ay dhulka, pin 22 si ay dhulka iyo Pin 23 si ay dhulka:
    • Haddii wax iska caabin ah ka Xidhiidhiyayaasha Inverter in dhulka la helay, barkinta PEC 19-Jidka isku xira nusasaace ka OEM 40-Jidka isku xira.
    • Haddii iska caabin ah ayaa weli laga helay iyadoo 19-Jidka ineysan, cusboonaysiiyo la habeeyo Vehicle ah, ka dibna tag Tallaabada 14.
    • Haddii caabin dhammaatay iyadoo 19-Jidka ineysan, tag Tallaabada 5.
    • Haddii meter akhriya OL ama Open Circuit, bedeli Inverter ah, ka dibna tag Tallaabada 14.

STEP 5. Hubi sii wareeggeedii isku xira PEC dhulka.

  1. Key off.
  2. Barkinta PEC 19-Jidka isku xira.
  3. On the PEC 19-Jidka isku xira, cabbiro:
    • pin 9, pin 13 iyo Pin 17 si ay dhulka
    • pin 9 in Pin 7, pin 9 in Pin 10, pin 9 si PEC haraaga sii kordhaya
    • pin 13 in Pin 7, pin 13 in Pin 14, pin 13 si PEC haraaga sii kordhaya
    • pin 17 in Pin 7, pin 17 in Pin 14, pin 17 si PEC haraaga sii kordhaya
      • Haddii wax iska caabin ah la helay ka musmaarradii PEC in ay dhulka, bedeli Box Relay ah. Eeg saarista MY09 PEC High-danab Relay Box iyo nidaamka Rakibaadda ee TRSM2000, ka dibna tag Tallaabada 14.
      • Haddii meter akhriya OL, qaadin ayaa loo baahan yahay, tag Tallaabada 4.

STEP 6. Hubi sii wareeggeedii isku xira PEC.

  1. Key off.
  2. Barkinta PEC 19-Jidka isku xira. (Adeegga Red Button on PEC waa in la soo saaray.)(Ha u qabtaan "Habka xiritaanka Hybrid" weli.)
  3. Cabir iska caabin ah oo ku saabsan isku xira PEC ah:
    • pin 9 in Pin 11
    • pin 13 in Pin 15
    • pin 17 in Pin 19
      • Haddii iska caabin ah u dhexeeya Pin 9 iyo Pin 11, iyo Pin 13 in Pin 15 waa kasta 33-37 ohms iyo iska caabin ka Pin 17 in Pin 19 waa 112-122 ohms, tag Tallaabada 7.
      • Haddii wax iska caabin ah ka baxsan ee kala duwan, dib Switch tiiro ee ku yaalla gudaha furitaanka filter hawada ama Rear Access Panel by sare danab Fiyuus, ka dibna tag Tallaabada 14.

STEP 7. Hubi a high-voltage cable Interlock ku Cable OEM ah.

  1. Hubi in Switch tiiro waa OK.
  2. Cabir iska caabin ah biinanka Interlock ku Cable OEM ah.
    Danger: Eeg High-Voltage Service Shutdown and Power-Up Procedures. Raac habraaca si looga fogaado filaan ah, gubaan ama dhimasho ka khaldan u maareeyeen a high-voltage.

    • Haddii iska caabin ah waa 0-0.3 ohms, bedeli Box Relay ah, ka dibna tag Tallaabada 9.
    • Haddii iska caabin ah waa OL, badalo Cable High-danab DC, ka dibna tag Tallaabada 8.

STEP 8. Hubi sii wareeggeedii isku xira PEC dhulka.

  1. Cabir iska caabin ah oo ku saabsan isku xira PEC ah (Switch Button Service cas waa ka baxay):
    • pin 9 in Pin 11
    • pin 17 in Pin 19
      • Haddii wax iska caabin ah waa OL, bedeli Box Relay ah (baadho taararka tegaya Relay Box ka hor badalay), ka dibna tag Tallaabada 9.

STEP 9.

  1. Key off.
  2. Haddii baabuurka ku qalabeysan yahay dhoofinta Power PEC, oofin "xiritaanka Service High-danab iyo Power Up-Habka" ee bogga 4, markaas ka qaad High-danab DC / DC iyo / ama APG High-danab Cable ka PEC ah. Ku rakib Caps Interlock haddii la heli karo:
    • Haddii MA gaari ku qalabeysan yahay dhoofinta Power, tag Tallaabada 11.

STEP 10.

  1. Ka dib markii DC / DC iyo fiilooyinka a high-voltage APG laga saaro, pull out red Service Switch and connect 19- Isku xira Jidka at PEC ah.
  2. Key on:
    • Haddii Babaca Code 116 / FMI 5 weli waa Active, tag Tallaabada 12.
    • Haddii Babaca Code 116 / FMI 5 dhammaatay, tag Tallaabada 14.

STEP 11.

  1. Key off.
  2. Furaysto DC / DC iyo / ama fiilooyinka APG dib PEC iyo xaqiijiyo in Babaca Code 116 / FMI 5 weli waa Active:
    • Haddii weli Active, tag Tallaabada 12.
    • Haddii Wax qabad la'aan, ee Relays darran gudaha PEC waxaa welded. PEC ka beddel. Eeg Carrier MY09 Power Electric (PEC) Ka kaxaynta iyo Rakibaadda, Alternative Power Electric Carrier (PEC) Removal and Installation or 4- Battery Power Electric Carrier (PEC) nidaamka ka saarida iyo Rakibaadda ee TRSM2000.
      Sidoo kale, inspect the Auxiliary Relay Circuit for loose Interlock Connections causing relay chatter under load see khalad Code 118 – Darran High danab Relay Control Circuit Babaca faahfaahinta circuit).
    • Ka dib markii dayactir ay dhammaystirmaan, tag Tallaabada 14.

STEP 12. Hubi sii wareeggeedii Inverter isku xira.

  1. Connect PEC 19-Jidka isku xira.
  2. Barkinta Inverter 40-Jidka isku xira.
  3. Cabir iska caabin at Inverter 40-Jidka isku xira OEM Terminal at musmaarradii soo socda:
    • pin 21 in Pin 31
    • pin 22 in Pin 32
    • pin 23 in Pin 33
      • Haddii iska caabin ah u dhexeeya Pin 21 iyo Pin 31 waa 112-122 ohms iyo iska caabin ka Pin 22 in Pin 32, iyo Pin 23 in Pin 33 waa kasta 33-37 ohms, bedeli Inverter ah (arki saarista MY09 Inverter iyo Rakibaadda), ka dibna tag Tallaabada 14.
      • Haddii iska caabin ah waa out of kala duwan, cusboonaysiiyo la habeeyo Vehicle u dhexeeya Inverter iyo PEC ah, ka dibna tag Tallaabada 14.

STEP 13. Cabbirka danab batari.

  1. Connect ServiceRanger in Baarista 9-Jidka isku xira in cab ah.
  2. Dooro "Data Monitor" option.
  3. View ku soo koobin soo socda liiska a high-voltage batteriga:
    • HV Battery J1939 Data HV Battery:
      Halbeegga 520250 HV Battery1 danab la fili karo oo dhimaya 520323 Battery danab RB
    • Riix in Button Adeegga cas.
    • Haddii akhrinta danab on Battery1 danab la fili karo iyo Battery danab RB waa gudahood 10 volts of kasta oo kale oo (Battery danab RB waa da'a in 30 volts markii Switch Service cas waxaa riixay in), bedeli Box Relay ah. Eeg saarista MY09 PEC High-danab Relay Box iyo nidaamka Rakibaadda ee TRSM2000, ka dibna tag Tallaabada 14.
      Note: "High-danab xiritaanka Service iyo
      Eeg High-Voltage Service Shutdown and Power-Up Procedures waa in la sameeyaa ka hor inta ay ka saareen cable a high-voltage. (Haddii ugu weyn
      Relays High-danab waxaa welded, ka saar fiyuuska a high-voltage ku yaalla Rear Access Panel inta aanay wax dayactir).
    • Haddii akhrinta danab on Battery1 danab la fili karo iyo Battery danab RB waa ka weyn yahay 10 volts of kasta oo kale oo (Battery danab RB waa da'a in 30 volts markii Switch Service cas waxaa riixay in), bedeli Inverter ah, ka dibna tag Tallaabada 14.

STEP 14. Hubi dayactirka.

  1. Key off.
  2. Xidhmaan oo dhan Xidhiidhiyayaasha iyo cable ka batari negative.
  3. Key on.
  4. codes Clear, arki Unu qabad la'aan Clear.
  5. Wado baabuur iyo isku dayaan in ay dib code ka.
  6. Hubi codes, arki View unu Active iyo Wax qabad la'aan.
    • Haddii codes ma, baaritaanka waa complete.
    • Haddii Code qalad 116 u muuqataa, heli qalad in imtixaanka, tag Tallaabada 1.
    • Haddii code kale oo aan ahayn 116 u muuqataa, arki Khalad List Code Index.

Qof kasta oo gudbinta qayb aad u baahan tahay aynu u leeyihiin! maalin isku mid ah maraakiibta la heli karo, dunida oo dhan.

U BAAHAN TAAGEERO FREE KA MID khubaro OUR?

WAC NOW
email US