Eaton Fuller Code Babaca Hybrid 2 motor / Generator sensor Heerkulka

Khalad code for Hybrid Eaton daydo Systems Drive (MY08) Cuneyso-8E306A-U, Cuneyso-8E306A-UPG, Cuneyso-8E306A-UP, Cuneyso-8E306A-CD, Cuneyso-8E306A-T, Cuneyso-6E606B-CD, (MY09) Cuneyso-8E406A-U / P, Cuneyso-8E406A-UP, Cuneyso-8E406A-UPG, Cuneyso-8E406A-CD, Cuneyso-8E406A-CDG, Cuneyso-8E406A-guud, Cuneyso-8E406A-T, Cuneyso-6E706B-CD, Cuneyso-6E706B-P iyo aad cuneyso-6E706B-UPG. The sensor Heerkulka Motor / Generator waa thermistor ah oo ku yaalla gudaha Motor ah / Generator in ay isbedesho in qiimaha ku saleysan heerkulka. Inverter ayaa siisa danab tixraaca 5-volt a in shidma iyo cabiraya dhibic volt ee Bannaanka ka. Marka heerkulka Motor / Generator waa diiran, caabin shidma ay yar tahay iyo Inverter ku ogaadaa low-danab (0.2 volts uyeelaysaan 536 ° F [280 ° C]). Marka Motor / Generator waa qabow iska caabin shidma yahay sare iyo Inverter ku ogaadaa danab sare (4.1 volts u dhigmaa ama 32 ° F [0 ° C]).

khalad Code 2 – motor / Generator Ogaanshaha sensor Heerkulka

The shuruud soo socda waa in la buuxiyaa ka hor inta nidaamka ogaadaa gardarrada:

  • danab suuroggalaan Inverter waa ka weyn yahay 7 volts iyo ka yar 16 volts.

Xaaladaha in Calan Babaca Code Active

Xaaladaha in Calan Babaca:
• IMF 3 ayaa lagu wadaa markii danab shidma ka wada weyn yahay 4.1 volts waayo, 10 seconds, halka heerkulka Inverter ay ka badan tahay 35 ° C ama 95 ° F, ama haddii danab saarka shidma uu ka yar yahay 0.2 volts waayo, 10 seconds.

Uugu Marka Babaca Code 2 ayaa lagu wadaa shuruudaha soo socda dhici:
• Amber "Check Hybrid" illuminates light.
• Babaca waxa lagu kaydiyaa Control Module Hybrid (Gudiga sare) xusuusta.
• High-danab Motor / Generator caawi waa la heli karaa, laakiin at cadad la yareeyey.

Xaaladaha in Calan Babaca Code qabad la'aan

Kaliya unu qabad la'aan la nadiifiyay karaa Unit Gudbinta Electronic Control ah (TECU) ama taariikhda HCM isticmaalaya ServiceRanger. TECU ayaa si toos ah oo ansixiyay unu ka dib markii taariikhda 200 saacadood iyo HCM si toos ah oo ansixiyay unu ka soo taariikhda ka dib qalad uu Wax qabad la'aan, waayo, 200 saacadood.

code qalad Tani waxaa keeni kara wax ka mid ah kuwan soo socda:

  • IMF 3
    • Motor / Generator
    • / Fiilo gaaban sensor Heerkulka furan dhexeeya Motor / Generator iyo Inverter ah
    • Inverter

khalad Code 2 – Motor / Generator Test sensor Heerkulka

Component Identification MY08 Series:

Delphi 56-Way Mating Connector View

Delphi 56-Jidka isku xira rimay View

Temperature Sensor

sensor heerkulka
(la habeeyo View – Side Front)

FIIRO GAAR AH: U dir ka Eaton Qeybta Hybrid oo isku xira Location waayo, Goobaha isku xira in Systems MY08

Eaton Fuller inverter connection

Component Identification MY09 Series:

Deutsch 40-Way Mating Connector View

Deutsch 40-Jidka isku xira rimay View
(Inverter – Isku xira danab Low)

Terminal Side - Harness Connector Temperature Sensor

Side terminal – La habeeyo isku xira Heerkulka sensor
(Deutsch 2-pin isku xira)

FIIRO GAAR AH: U dir ka Eaton Qeybta Hybrid oo isku xira Location waayo, Goobaha isku xira in Systems MY09.

Eaton Fuller inverter connection MY09

STEP 1. Hubi xaaladda code qalad iyo sii-qoraha / Generator circuit sensor Heerkulka

  1. Dib u eeg oo raaca digniinaha & ganaaxyada.
  2. Ceshano codes qalad Active iyo FMIs la ServiceRanger isticmaalaya Baarista 9-Jidka isku xira.
  3. Key off.
  4. Disconnect the Temperature Sensor Connector at the Motor/Generator.
    Danger: Eeg High-Voltage Service Shutdown and Power-Up Procedures. Raac habraaca si looga fogaado filaan ah, gubaan ama dhimasho ka khaldan u maareeyeen a high-voltage.
  5. Cabir iska caabin at Motor / Generator 2-jidka isku xira sensor Heerkulka ka Pin A si Pin B(MY08)/ pin 1 in Pin 2(MY09):
    • Haddii iska caabin ah waa 0.8K ohms in 301.7K ohms, tag Tallaabada 2.
    • Haddii iska caabin ah ka baxsan ee kala duwan, bedeli Motor / Generator ah, ka dibna tag Tallaabada 3.

STEP 2. Hubi sii Inverter iyo Motor / Generator circuit sensor Heerkulka.

  1. Key off
  2. Barkinta Inverter ee 56-Jidka isku xira.
  3. Xidhmaan 2-Jidka Motor / Generator soo Heerkulka sensor isku xira.
  4. Cabir iska caabin ah ee soo socda:
      • Inverter 56-Jidka isku xira Pin 50 in Pin 38(MY08) / 40-Jidka isku xira Pin 37 in Pin 36, Inverter(MY09.
      • Inverter 56-Jidka isku xira Pin 50 si ay dhulka (MY08) / 40-Jidka isku xira Pin 37 si ay dhulka (MY09).

    Note: Si tartiib ah awooddiisa Inverter ee 56-jidka la habeeyo dhow isku xira inta la socodka qiimaha caabiga.

    1. Haddii iska caabin ah waa 0.8K-301.7K ohms dhexeeya Pin 50 iyo Pin 38 (37 & 37) iyo iska caabin ah oo u dhexeeya Pin 50 (37) iyo dhulka waa 10km ohms ama ka weyn, bedeli Inverter ah, ka dibna tag Tallaabada 3.
    2. Haddii iska caabin ah ka baxsan ee kala duwan, cusboonaysiiyo furan ama gaaban dhulka ee suunka u dhexeeya isku xira Inverter iyo Motor / Generator 2-jidka isku xira, ka dibna tag Tallaabada 3.

STEP 3. Hubi dayactirka.

  1. Key off.
  2. Xidhmaan oo dhan Xidhiidhiyayaasha iyo cable ka batari negative.
  3. Key on.
  4. codes Clear.
  5. Wado baabuur iyo isku dayaan in ay dib code ka.
  6. Hubi codes.
    • Haddii codes ma, baaritaanka waa complete.
    • Haddii Babaca Code 2 u muuqataa, heli qalad in imtixaanka, tag Tallaabada 1.
    • Haddii code kale oo aan ahayn 2 u muuqataa, arki Khalad List Code Index.

Qof kasta oo gudbinta qayb aad u baahan tahay aynu u leeyihiin! maalin isku mid ah maraakiibta la heli karo, dunida oo dhan.

U BAAHAN TAAGEERO FREE KA MID khubaro OUR?

WAC NOW
email US