Hybrid Eaton Fuller Gudbinta Babaca Code 118 – Darran High danab Relay Control Circuit Babaca

Khalad code for Hybrid Eaton daydo Systems Drive (MY09) Cuneyso-8E406A-U / P, Cuneyso-8E406A-UP, Cuneyso-8E406A-UPG, Cuneyso-8E406A-CD, Cuneyso-8E406A-CDG, Cuneyso-8E406A-guud, Cuneyso-8E406A-T, Cuneyso-6E706B-CD, Cuneyso-6E706B-P iyo aad cuneyso-6E706B-UPG. Read hoose si aad u bartaan sida si ay u tijaabiso, nadiifiso iyo hagaajin qalad code qalad aad Freightliner, Mack, Peterbilt, Kenworth, Volvo, International, iyo gaari xamuul culus-waajib iyo qalabka. The Relays a high-voltage kaabayaal, oo ku yaalla Electric Power ka Carrier (PEC), waxaa gacanta ku Control Module ku Hybrid (Gudiga sare). At muhiim ah oo ku saabsan, baalo korontada waxaa bixisey ka Box Relay u Relays a high-voltage kaabayaal. Marka xulashada ePTO la xushay on Control ku Riix badhanka Shift, Gudiga sare ee energizes wareeggeedii gacanta ee Relays xun ugu weyn ee togan iyo ugu weyn. Awoodda markaas socodka iyada oo Relays a high-voltage kaabayaal u Converter DC / DC.

khalad Code 118 – Darran High danab Control Relay Circuit Babaca Ogaanshaha

The shuruud soo socda waa in la buuxiyaa ka hor inta nidaamka ogaadaa gardarrada:

  • Control Module Hybrid (Gudiga sare) danab suuroggalaan waa ka weyn yahay 7 volts iyo ka yar 16 volts.

Note: Marka dhib code ah Wax qabad la'aan tixraac ah Product Baarista Mode (PDM)

Xaaladaha in Calan Babaca Code Active

  • IMF 3 is set when the HCM detects a short to battery in the coil circuit of the auxiliary high-voltage relay.
  • IMF 4 ayaa lagu wadaa markii Gudiga sare ee ogaadaa gaaban dhulka wareegi gariiradda ee Relay-danab sare ee kaabayaal ah.
  • IMF 5 ayaa lagu wadaa markii Gudiga sare ee ogaadaa furan wareegi gariiradda ee Relay-danab sare ee kaabayaal ah.

Uugu Marka Babaca Code 118 ayaa lagu wadaa shuruudaha soo socda dhici:

  • Amber "Check Hybrid" illuminates light.
  • Gaf waxa lagu kaydiyaa Control Module Hybrid (Gudiga sare) xusuusta.
  • The DC / DC Converter ma shaqeeyaan, sababtoo ah HCM de-energizes circuit Relay-danab sare ee kaabayaal ah.

Xaaladaha in Calan Babaca Code qabad la'aan

Kaliya unu qabad la'aan la nadiifiyay karaa Unit Gudbinta Electronic Control ah (TECU) ama taariikhda HCM isticmaalaya ServiceRanger. TECU ayaa si toos ah oo ansixiyay unu ka dib markii taariikhda 200 saacadood iyo HCM si toos ah oo ansixiyay unu ka soo taariikhda ka dib qalad uu Wax qabad la'aan, waayo, 200 saacadood.

code qalad Tani waxaa keeni kara wax ka mid ah kuwan soo socda:

  • IMF 3, 4, 5
    • OEM taararka ka HCM si PEC
    • cable DC / DC loop a high-voltage
    • DC / DC Converter
    • Darran Power Generator (APG) cable a high-voltage loop (haddii aan qalabaysnayn)
    • APG Converter (haddii aan qalabaysnayn)
    • Relay a high-voltage darran (gudaha PEC)

khalad Code 118 – Darran High danab Relay Control Circuit Babaca Test

Aqoonsiga Qeybta:

FIIRO GAAR AH: U dir ka Eaton Qeybta Hybrid oo isku xira Location waayo, Goobaha isku xira in Systems MY09.

HCM PEC DC DC APG Connectors Eaton Fuller transmission

Haddii aan gaari ku qalabeysan yahay APG, cap interlock HV leh loop waa in lagu rakibo haddii aan baabuurka ku qalabeysan yahay a DC / DC, A cap HV Interlock la loop waa in la rakibo.

STEP 1. Hubi xaaladda code qalad Active ama qabad la'aan iyo hadiyad FMIs.

  1. Dib u eeg oo raaca digniinaha & ganaaxyada.
  2. Ceshano codes qalad Active iyo FMIs la ServiceRanger isticmaalaya Baarista 9-Jidka isku xira ama gacanta.
  3. Key off.
    Danger: Eeg High-Voltage Service Shutdown and Power-Up Procedures. Raac habraaca si looga fogaado filaan ah, gubaan ama dhimasho ka khaldan u maareeyeen a high-voltage.
  4. Waa kuwee FMIs joogaan?
    • Haddii FMI 3 waxaa ku qoran, tag Tallaabada 2.
    • Haddii FMI 4 waxaa ku qoran, tag Tallaabada 3.
    • Haddii FMI 5 waxaa ku qoran go Tallaabada 6.

STEP 2. Cabir danab ee HCM lagaga dhulka.

  1. Key off.
  2. Barkinta la habeeyo Gudiga sare ee 38-Jidka Connector.3. Key on. Code 88 qotomin doonaa. Gaf Clear ka dib markii imtixaanka.
  3. Measure voltage on the following pins of the 38- Way suunka silig:
    • pin 33 si ay dhulka
    • pin 5 si ay dhulka
      • Haddii danab ka Pin 33 si ay dhulka iyo Pin 5 si ay dhulka waa 0 volts, bedeli HCM (oo kaliya haddii Babaca Code waa Active), ka dibna tag Tallaabada 10.
      • Haddii danab lagu helo on Pin 33 si ay dhulka ama Pin 5 si ay dhulka, barkinta 19 Way con-nector ee PEC iyo tijaabada kucelinta.
      • Haddii danab wali waa la joogo, dayactirka Vehicle Har-raag u dhexeeya Gudiga sare iyo PEC.
      • Haddii danab dhammaatay ka dib markii tijaabada kucelinta, tag Tallaabada 3.

STEP 3. Cabir iska caabin ah oo ka mid ah circuit HCM lagaga dhulka.

  1. Key on.
  2. Ka saar 19-Jidka isku xira ee PEC. Hubi danab on Pin 3 iyo Pin 4 on PEC.
    • Haddii danab kasta waxaa laga helaa qabtaan tallaabooyinka soo socda:
      • Ka saar DC / DC cable-danab sare iyo tijaabada kucelinta.
      • Ka saar APG cable-danab sare iyo tijaabada kucelinta.
        • Bedel PEC haddii danab wali waa la joogo.
  3. Haddii danab ma waxaa laga helaa, cabbiro iska caabin ah ku xira PEC 19-Jidka on musmaarradii soo socda:
    • pin 3 in Pin 7
    • pin 3 in Pin 10
    • pin 3 in Pin 14
    • pin 3 si PEC haraaga sii kordhaya
      • Haddii ohms waa wareeg furan, xidhmaan DC / DC cable-danab sare iyo APG cable-danab sare iyo tijaabada kucelinta. Haddii weli circuit furan, tag Tallaabada 2.
      • Haddii ohms tusi circuit shorted, ka saar DC / DC iyo APG fiilooyinka a high-voltage. Haddii weli shorted, bedeli PEC ah. Ka dib markii dayactir la sameeyey, tag Tallaabada 10.
      • Haddii gaaban waxaa go'doonsan in 1 cable a high-voltage, hubi cable oo ka kooban iyo interlocks cable Ohm afjaro-to-dhamaadka. Haddii kuwa ku fiican yihiin, bedelo qayb shorted (DC / DC Converter ama APG Converter).

STEP 4. Test for gaaban dhulka on Vehicle la habeeyo ka HCM si PEC ah.

  1. Key off
  2. Barkinta Gudiga sare ee 38-Jidka isku xira. The PEC 19- Isku xira Way waa in la xiran.
  3. Cabir iska caabin ah oo ka mid ah 38-Jidka isku xira on Pin 33 si ay dhulka.
    • Haddii iska caabin ah waa OL, bedeli HCM. Eeg Control Module ku Hybrid (Gudiga sare) Ka saarida iyo nidaamka Rakibaadda ee TRSM2000.
    • Haddii caabin muujinaysaa gaaban a wareegi jiray dhulka, barkinta ku xira 19-Jidka at PEC iyo imtixaan Pin 33 si ay dhulka.
    • Haddii gaaban weli joogo, cusboonaysiiyo la habeeyo Vehicle u dhexeeya Gudiga sare iyo PEC ah
    • Haddii gaaban waa jiheysteen, tag Tallaabada 5.

STEP 5. Cabir iska caabin ka DC / DC Converter dhulka.

  1. Key off.
  2. Barkinta 19-Jidka isku xira ka PEC ah.
  3. Cabir iska caabin ah oo ku saabsan isku xira PEC 19-Jidka on musmaarradii soo socda:
    • pin 3 in Pin 7
    • pin 3 in Pin 10
    • pin 3 in Pin 14
    • pin 3 si PEC haraaga sii kordhaya
      • Haddii caabin muujinaysaa OL, tag Tallaabada 4. tijaabada kucelinta.
      • Haddii caabin muujinaysaa gaaban ku soo wareegi jiray dhulka, ka saar a high-voltage DC / DC iyo fiilooyinka APG hal mar ah si ay u jaraan circuit la gaaban.
      • Haddii gaaban waxaa laga helaa ka mid ah fiilooyinka a high-voltage kaabayaal, ka saar cable-danab sare iyo musaamiirtooda interlock Ohm afjaro-to-dhamaadka. Haddii cable waa wanaagsan yahay, bedelo qayb shorted (DC / DC Converter ama APG Converter).
      • Haddii iska caabin ah uu wali muujinayaa gaaban la fiilooyinka-volt-da sare saaro, bedeli PEC. Eeg Carrier MY09 Power Electric (PEC) Ka saarida iyo nidaamka Rakibaadda ee TRSM2000. Ka dib markii dayactir waa complete, tag Tallaabada 10.

STEP 6. Cabir iska caabin ka DC / DC Converter dhulka.

  1. Key off
  2. Ka saar ee isku xira 19 Way ka PEC ah.
  3. Cabir iska caabin ah oo ku saabsan musmaarradii soo socda isku xira PEC ah:
    • pin 3 in Pin 4
    • Haddii iska caabin ah waa 12-22 ohms, tag Tallaabada 9.
    • Haddii iska caabin ah waa OL, tag Tallaabada 7.

STEP 7. Hubi sii ah cable DC / DC.

  1. Ka saar DC / DC High-danab Cable ee PEC. Leave cable attached to DC/DC Converter.
    Note: Haddii aadan ku qalabaysan DC / Converter DC, hubi Cap Interlock Loop.
  2. Cabir iska caabin on DC / DC High-danab Cable Interlock musmaarradii.
    • Haddii iska caabin ah waa 0-0.3 ohms, tag Tallaabada 8.
    • Haddii iska caabin ah waa OL, remove DC/DC High-Voltage Cable and ohm Interlock Pins end-to-end.
    • Haddii caabin cable waa OL, bedeli Cable DC / DC.
    • Haddii caabin cable waa 0-0.3 ohms, bedeli Converter DC / DC. Eeg DC / DC saarista Converter iyo nidaamka Rakibaadda ee TRSM2000. Ka dib markii dayactir waa complete, tag Tallaabada 10.

STEP 8. Hubi sii cable APG.

  1. ka PEC saar cable APG. Leave cable attached at APG end.
    Note: Haddii aadan ku qalabaysan APG, hubi Cap Interlock Loop
  2. Cabir iska caabin on APG High-danab Cable Interlock musmaarradii.
    • Haddii iska caabin ah waa 0-0.3 ohms, bedeli PEC. Eeg Carrier MY09 Power Electric (PEC) Ka saarida iyo nidaamka Rakibaadda ee TRSM2000. Ka dib markii dayactir la sameeyey, tag Tallaabada 10.
    • Haddii iska caabin ah waa OL, ka saar APG High-danab Cable. Cabir Interlock musmaarradii dhamaadka-to-dhamaadka.
    • Haddii caabin cable waa OL, replace APG High-Voltage Cable.
    • Haddii caabin cable waa 0-0.3 ohms, bedeli APG. Ka dib markii dayactir, tag Tallaabada 10.

STEP 9. Cabir iska caabin ah HCM.

  1. Key off.
    Note: Talaabadan waxaa lagu sameeyaa ka dib markii lagu qiyaaso ohms ku Pin 3 iyo Pin 4 oo waxay qiyaasay inta u dhaxaysa 12-22 ohms.
  2. Ka saar 38-Jidka Vehicle la habeeyo isku xira.
  3. Ka saar ee isku xira 19-Jidka at PEC ah.
  4. Cabir musmaarradii soo socda ee u dhexeeya isku xira 38-Jid oo 19-Jidka isku xira:
    • pin 33 (38-isku xira Jidka) in Pin 3 (19-isku xira Jidka).
    • pin 5 (38-isku xira Jidka) in Pin 4 (19-isku xira Jidka).
      • Haddii iska caabin ah waa OL, La habeeyo dayactirka gaadiidka u dhexeeya Gudiga sare iyo PEC ah.
      • Haddii iska caabin ah waa dhexeeya 0-0.3 ohms, bedeli HCM. Eeg Control Module ku Hybrid (Gudiga sare) Ka saarida iyo nidaamka Rakibaadda ee TRSM2000. Ka dib markii dayactir la sameeyey, tag Tallaabada 10.

STEP 10. Hubi dayactirka.

  1. Key off.
  2. Xidhmaan oo dhan Xidhiidhiyayaasha.
  3. Key on.
  4. Jiid Switch Service cas on PEC.
  5. codes Clear, arki Unu qabad la'aan Clear.
  6. Wado baabuur iyo isku dayaan in ay dib code ka.
  7. Hubi codes, arki View unu Active iyo Wax qabad la'aan.
    • Haddii codes ma, baaritaanka waa complete.
    • Haddii Code qalad 118 u muuqataa, heli qalad in imtixaanka, tag Tallaabada 1.
    • Haddii code kale oo aan ahayn 118 u muuqataa, arki Khalad List Code Index.

Qof kasta oo gudbinta qayb aad u baahan tahay aynu u leeyihiin! maalin isku mid ah maraakiibta la heli karo, dunida oo dhan.

U BAAHAN TAAGEERO FREE KA MID khubaro OUR?

WAC NOW
email US