Hybrid Eaton Fuller Gudbinta Babaca Code 59 – J1939 Isgaarsiinta Link (Gudiga sare)

Khalad code for Hybrid Eaton daydo Systems Drive (MY08) Cuneyso-8E306A-U, Cuneyso-8E306A-UPG, Cuneyso-8E306A-UP, Cuneyso-8E306A-CD, Cuneyso-8E306A-T, Cuneyso-6E606B-CD, (MY09) Cuneyso-8E406A-U / P, Cuneyso-8E406A-UP, Cuneyso-8E406A-UPG, Cuneyso-8E406A-CD, Cuneyso-8E406A-CDG, Cuneyso-8E406A-guud, Cuneyso-8E406A-T, Cuneyso-6E706B-CD, Cuneyso-6E706B-P iyo aad cuneyso-6E706B-UPG. Read hoose si aad u bartaan sida si ay u tijaabiso, nadiifiso iyo hagaajin qalad code qalad aad Freightliner, Mack, Peterbilt, Kenworth, Volvo, International, iyo gaari xamuul culus-waajib iyo qalabka. J1939 waa-xawaaraha sare qaloocin labada ciyaaryahan 250K link xogta la mid ah 120 Ohm resistor dhamaadka kasta oo ka mid link. The Control Module Hybrid (Gudiga sare) ku xiran link xogta J1939 ee 38-Jidka isku xira. link waxaa loo isticmaalaa in ay u gudbiyaan ama la siiyo macluumaad hawlgal ka modules kale ee network sida Unit Gudbinta Electronic Control ah (TECU) ama Unit Control Electronic (ECU).

khalad Code 59 – J1939 Isgaarsiinta Link (Gudiga sare) ogaanshaha

The shuruud soo socda waa in la buuxiyaa ka hor inta nidaamka ogaadaa gardarrada:

  • Control Module Hybrid (Gudiga sare) danab suuroggalaan waa ka weyn yahay 7 volts iyo ka yar 16 volts.

Note: Marka dhib code ah Wax qabad la'aan tixraac ah Product Baarista Mode (PDM)

Xaaladaha in Calan Babaca Code Active

  • IMF 2 ayaa lagu wadaa in Product Baarista Mode (PDM) and occurs when the HCM loses communication with any other module on the J1939 Data Link for 3
    farriimo isku xiga.
  • IMF 9 ayaa lagu wadaa markii HCM lumiyo isgaarsiinta oo dhan modules on link xogta J1939 ee 30 farriimo isku xigta ama ka badan.

Uugu Marka Babaca Code 59 ayaa lagu wadaa shuruudaha soo socda dhici:

  • Amber "Check Hybrid" iyo kuwo gaduud "Jooji Hybrid" nalalka ma muujiyaan, tan iyo nalalka ku yihiin in ka badan Data J1939 ku Link.
  • Gaf waxa lagu kaydiyaa xasuusta HCM.
  • mode Operation badala in hab "AutoShift oo keliya".
  • Haddii qalad ah oo dhigaya at kor xoog, the engine will not crank.
  • Haddii nooc gardarrada halka baabuur-wadidda, gaariga u wareejin doona, si kastaba ha ahaatee; marka gaariga joojiyo xajin furo oo weli furan.
  • Electric Motor / Generator la taageero iyo noolaynta naafada ah; si kastaba ha ahaatee, ee Relays a high-voltage sii powered.
  • Red "Service" iftiin iyo "F" biligleynaya in bandhigay marsho u muuqan karaan sababtoo ah xeerka qalad Active 24, 35, ama 36.

Xaaladaha in Calan Babaca Code qabad la'aan

Kaliya unu qabad la'aan la nadiifiyay karaa Unit Gudbinta Electronic Control ah (TECU) ama taariikhda HCM isticmaalaya ServiceRanger. TECU ayaa si toos ah oo ansixiyay unu ka dib markii taariikhda 200 saacadood iyo HCM si toos ah oo ansixiyay unu ka soo taariikhda ka dib qalad uu Wax qabad la'aan, waayo, 200 saacadood.

code qalad Tani waxaa keeni kara wax ka mid ah kuwan soo socda:

  • IMF 2
    • J1939 Data Link
    • Gudiga sare

khalad Code 59 – J1939 Isgaarsiinta Link (Gudiga sare) Test

Aqoonsiga Qeybta:

HCM - Hybrid System Interface Connector

La habeeyo Front View
(Gudiga sare – Hybrid System Wajahadda isku xira)

Eaton Fuller transmission 9 pin diagnostic connector

9 Pin Baarista isku xira

FIIRO GAAR AH: U dir ka Eaton Qeybta Hybrid oo isku xira Location waayo, Goobaha isku xira in Systems MY08

FIIRO GAAR AH: U dir ka Eaton Qeybta Hybrid oo isku xira Location waayo, Goobaha isku xira in Systems MY09.

HCM 9 pin diagnostic connector location for Eaton Fuller transmission

STEP 1. Hubi xaaladda code qalad Active ama qabad la'aan.

  1. Ceshano codes qalad Active iyo FMIs la ServiceRanger isticmaalaya Baarista 9-Jidka isku xira.
  2. Key on.
  3. Dooro screen "Vehicle ka Kooban" iyo aragto modules kala duwan in ay yihiin warbixinta ku saabsan link J1939 ah:
    • Haddii Gudiga sare ee aan warbixinta ku saabsan J1939 laakiin TECU waxaa ku qoran, tag Tallaabada 2.
    • Haddii Gudiga sare iyo TECU aan warbixinta ku saabsan J1939, tag Tallaabada 3.

STEP 2. Hubi sii wareeggeedii Vehicle la habeeyo.

  1. Key off
  2. Goostay cable batari negative.
  3. Barkinta HCM la habeeyo 38-jidka isku xira.
  4. Cabir iska caabin ah oo u dhexeeya Gudiga la habeeyo 38-Jidka isku xira Pin 2 iyo Pin 3: .
    Note: Hubi in Waat / Ohm Meter waa on qiyaasta saxda ah (ku dhowaad 200 qiyaasta Ohm)

    • Haddii iska caabin ah oo u dhexeeya Pin 2 iyo Pin 3 waa inta u dhaxaysa 50-70 ohms, bedeli Control Module ku Hybrid (Gudiga sare), ka dibna tag Tallaabada 5.
    • Haddii iska caabin ah ka baxsan ee kala duwan, dayactirka Data J1939 link la habeeyo, ka dibna tag Tallaabada 5.

STEP 3. Hubi sii wareeggeedii J1939 Baarista isku xira.

  1. Key off.
  2. Cabir iska caabin ah u dhexeeya Pin C iyo D Pin on the 9-Jidka isku xira Baarista:
    • If resistance between Pin C and Pin D is 50–70 ohms, tag Tallaabada 4.
    • Haddii iska caabin ah waa 70 ohms ama ka weyn, mid ama ka badan resistors gabagabaynta on Link Data J1939 ee la habeeyo ku maqan yahay, out of kala duwan, ama waxaa jira furan in link. Dayactir ka OEM J1939 Data Link la habeeyo, ka dibna tag Tallaabada 5.
    • Haddii iska caabin ah waa 50 ohms ama ka yar, waxaa jira joogo resistor gabagabaynta dheeraad ah. Dayactir ka OEM J1939 Data Link la habeeyo, ka dibna tag Tallaabada 5.

STEP 4. Hubi sii wareeggeedii J1939 Baarista isku xira.

  1. Key off.
  2. Cabir iska caabin ah oo u dhexeeya Pin C iyo dhulka on the 9-Jidka isku xira Baarista:
    • Haddii iska caabin ah oo u dhexeeya Pin C iyo dhulka waa 10km ohms ama ka weyn, isku dayaan in ay la gaari kale oo isgaadhsiin iyo in la hubiyo ServiceRanger ayaa ka shaqaynaysa. Haddii ServiceRanger ku guuldareysto inuu la gaari kale oo isgaadhsiin, call 1- 800-826-I CAAWI (4357).
    • Haddii iska caabin ah ka baxsan ee kala duwan, cusboonaysiiyo Data J1939 link la habeeyo marka la soo gaabiyo ah dhulka, ka dibna tag Tallaabada 5.

STEP 5. Hubi dayactirka.

  1. Key off.
  2. Key on.
  3. codes Clear, arki Unu qabad la'aan Clear.
  4. Xidhmaan oo dhan Xidhiidhiyayaasha iyo cable ka batari negative.
  5. Wado baabuur iyo isku dayaan in ay dib code ka.
  6. Hubi codes, arki View unu Active iyo Wax qabad la'aan.
    • Haddii codes ma, baaritaanka waa complete.
    • Haddii Code qalad 59 u muuqataa, heli qalad in imtixaanka, tag Tallaabada 1.
    • Haddii code kale oo aan ahayn 59 u muuqataa, arki Khalad List Code Index.

Qof kasta oo gudbinta qayb aad u baahan tahay aynu u leeyihiin! maalin isku mid ah maraakiibta la heli karo, dunida oo dhan.

U BAAHAN TAAGEERO FREE KA MID khubaro OUR?

WAC NOW
email US