Hybrid Eaton Fuller Gudbinta Babaca Code 26 – simbiriirixan Lidka

Khalad code for Hybrid Eaton daydo Systems Drive (MY08) Cuneyso-8E306A-U, Cuneyso-8E306A-UPG, Cuneyso-8E306A-UP, Cuneyso-8E306A-CD, Cuneyso-8E306A-T, Cuneyso-6E606B-CD, (MY09) Cuneyso-8E406A-U / P, Cuneyso-8E406A-UP, Cuneyso-8E406A-UPG, Cuneyso-8E406A-CD, Cuneyso-8E406A-CDG, Cuneyso-8E406A-guud, Cuneyso-8E406A-T, Cuneyso-6E706B-CD, Cuneyso-6E706B-P iyo aad cuneyso-6E706B-UPG. shirka ayaa si farsamaysan xajin gacanta iyada oo Lidka Electric ah leewarka (ECA) kaas oo la dhajinta on guryaha xajin. The Control Module Hybrid (Gudiga sare) gacanta ku meel ECA iyo kormeera dhowr doorsoomayaal si loo ogaado haddii ay jiraan walaac warqada ku xajin ah marka ay tahay in booska u xiran yihiin.

khalad Code 26 – Ogaanshaha simbiriirixan Lidka

The shuruud soo socda waa in la buuxiyaa ka hor inta nidaamka ogaadaa gardarrada:

  • Gudiga sare danab suuroggalaan waa ka weyn yahay 7 volts iyo ka yar 16 volts.
  • ECA danab suuroggalaan waa ka weyn yahay 7 volts iyo ka yar 16 volts.
  • There is no Active fault code 18 , 19 ama 87 jooga.

Xaaladaha in Calan Babaca Code Active

  • IMF 10 ayaa lagu wadaa markii meel marsho ma aha dhexdhexaad ah, xajin waa in booska shaqeyn farqiga u dhexeeya Input gudbinta sensor Speed ​​usheeda dhexe iyo xawaaraha engine ka wada weyn yahay 150 RPM, waayo, 1 labaad ama ka badan.
  • IMF 23 ayaa lagu wadaa markii Gudiga sare ee ogaadaa xaalad xajin kululaado.
    Note: A “CA” appears if the clutch is allowed to slip and create heat beyond a set point. Do not use the throttle as a hill hold device as it causes clutch damage and a CA.

Uugu Marka Babaca Code 26 ayaa lagu wadaa shuruudaha soo socda dhici:

  • Red "Stop Hybrid" iftiin ama hurdiga "Hubi Hybrid" illuminates light.
  • Gaf waxa lagu kaydiyaa xasuusta HCM.

Xaaladaha in Calan Babaca Code qabad la'aan

Kaliya unu qabad la'aan la nadiifiyay karaa Unit Gudbinta Electronic Control ah (TECU) ama taariikhda HCM isticmaalaya ServiceRanger. TECU ayaa si toos ah oo ansixiyay unu ka dib markii taariikhda 200 saacadood iyo HCM si toos ah oo ansixiyay unu ka soo taariikhda ka dib qalad uu Wax qabad la'aan, waayo, 200 saacadood.

code qalad Tani waxaa keeni kara wax ka mid ah kuwan soo socda:

  • IMF 10
    • Lidka Assembly
  • IMF 23

khalad Code 26 – Imtixaanka simbiriirixan Lidka

digniinaha & ganaaxyada

Danger: Danger muujinaysaa aad la si xun u dhaawacmay doonaa ama la dilay haddii aadan raaci doonaa habraaca ku tilmaamay.
digniin: Digniin halis degdeg ah, taas oo keeni karta dhaawac shakhsi daran haddii aadan raaci doonaa habraaca ku tilmaamay.
digniin: Digniin muujinaysaa gaariga ama hantida dhaawac dhici kara haddii aadan raaci doonaa habraaca ku tilmaamay.

Note: Note muujinaysaa faahfaahin dheeraad ah u gargaartaan in cudurka ama dayactir ah component / Nidaamka.

Raac hannaanka ku qeexan amarka tilmaamay in ay ka fogaadaan dhaawac shakhsi ahaaneed:

1. Haddii loo yaqaano a high-voltage yihiin hareeraha baabuurka iyo ka joojinta la geliyo PEC ah, qofka kaliya ee la ogol yahay waa in ay u bilaabaan gaariga uu yahay qofka saxiixay tag joojinta.
2. Ka hor inta shaqeeya on gaari ama ka soo baxaya cab halka engine la socda, waa in aad meel lever wareeg ee "N" dhigay jejebiyey la dhigto, iyo xannibi giraangirihiina.
3. Sababo nabadgelyo, had iyo jeer ka qayb biriiga adeegga ka hor doorashada jagooyinka marsho ka "N."
4. Ka hor inta aadan bilaabin gaari had iyo jeer la fadhiya kursiga darawalka, dooro "N" on gacanta ku wareejin ah, oo qarka u saaran biriiga la dhigto.
5. In baabuurta la ePTO, engine iyo / ama
Motor / Generator bilaabi kartaa in hab ePTO. Marna qabtaan dayactirka ama shaqeeyaan gaadiidka, halka hab this.
6. 12-Waat Battery wanaagsan (+) iyo negative (-) waa in la hor ineysan si alxanka kasta oo gaari kasta Hybrid qalabaysan.

digniin: Raac hannaanka ku qeexan amarka tilmaamay in ay ka fogaadaan cillad qalabka ama dhaawac.
digniin: Ha sii daayo jejebiyey la dhigto ama isku dayaan in ay doortaan marsho ilaa cadaadiska hawada waa heerka saxda ah.
digniin: Si looga fogaado waxyeelo ay ku gudbinta lagu jiro jiidaya meesha lever wareeg ee "N" oo kor u giraangiraha drive ka off dhulka ama barkinta driveline ah.

Digniinaha High-danab & ganaaxyada

  • Isticmaal CO2 ama qallalan Chemical Dab bakhtiiyeyaasha.
  • The taararka a high-voltage waxaa daboolay ningax orange ama tubbada convoluted iyo sumadaha digniin at Xidhiidhiyayaasha ku calaamadsan.
  • All Hybrid Eaton® Diesel / baabuurta Electric waxaa la qorayaa 'Hybrid’ dibaddeeda oo gaariga, oo ay la socdaan calaamad wareejin on dumisaan ah.
  • U dir ka OEM meel gaarka ah ee jiifku Jaha qaybaha hybrid.
  • HA jarjar ah fiilooyinka a high-voltage orange.
  • HA jarjar ama furo PEC ah.
  • HA jarjar ama furo Converter DC / DC.
  • HA jarjar ama furo Inverter ah.

aag-dhuleed A waa in kor loo dhigay iyo high-voltage dahaaran gacno gashi rabar (fasalka 0 la sokeeye maqaar) waxaa loo baahan yahay ka hor inta aan la shaqeeyo on a high-voltage. Dhicitaanka in la raaco tilmaamaha keeni kartaa in dhaawac shakhsi aad u daran ama dhimasho.
gacmo gashi The caag-dahaaran tahay in la xirto, halka ka shaqeeya nidaamka a high-voltage yihiin fasalka 0 la sokeeye maqaar. gacno gashi rabar ah waa in la baaro inta aan la isticmaalin KASTA socda nidaamka caag imtixaanka gashi ningax laga helay "Tools Baarista / Publications Service" ee bogga 6. Dhicitaanka in la raaco tilmaamaha keeni kartaa in dhaawac shakhsi aad u daran ama dhimasho.
Ka hor baarista ama ka shaqeeya fiilooyin a high-voltage ama qaybaha "Habka Adeegga xiritaanka High-danab iyo Power Up-" ee bogga 4 Waa in la raaco. Dhicitaanka in la raaco tilmaamaha keeni kartaa in dhaawac shakhsi aad u daran ama dhimasho.
The qalabka Shaqoxannibista iyo Tagout waa saaro kaliya farsamo yaqaan ah in kaalinta qalabka Shaqoxannibista iyo Tagout on gaariga. Dhicitaanka in la raaco tilmaamaha keeni kartaa in dhaawac shakhsi aad u daran ama dhimasho.
High-danab gacno gashi rabar dahaaran (fasalka 0 la sokeeye maqaar) waa in la gashanaadaa markuu ka shaqeeya kasta
fiilooyinka a high-voltage. The "xiritaanka High-danab Service iyo Power Up-Habka" ee bogga 4 waa in la hor raacay in ay ka saareen wax fiilooyinka a high-voltage. Dhicitaanka in la raaco tilmaamaha keeni kartaa in dhaawac shakhsi aad u daran ama dhimasho.
fiilooyinka High-danab iyo xarkaha waa orange iyo waxa ku jira qoran calaamadda digniinta ee Xidhiidhiyayaasha ah. qaybaha High-danab waxaa lagu calaamadeeyay leh calaamadda a. High-danab gacno gashi rabar dahaaran (fasalka 0 la sokeeye maqaar) waa in la isticmaalaa marka ka shaqeeya mid ka mid ah qaybaha kuwaas oo. Dhicitaanka in la raaco tilmaamaha keeni kartaa in dhaawac shakhsi aad u daran ama dhimasho.

Nidaamka High-danab xiritaanka Service

Xiritaanka Service High-danab iyo Habka Power Up-1. Raac "High-danab Work Area" nidaamka.
2. Hel ka Switch Service PEC cas on hore ee PEC iyo riixdo demiso.
3. Ka saar Cover Switch Service iyo rakibi qaybta ka joojinta (J48506).
4. tag giijin in qaybta ka joojinta.
5. Hubi in ay Switch Service PEC aan ka booska off dhaqaajin karin.
6. U ogolow nidaamka si ay u dejiyaan ugu yaraan 5 daqiiqo oo ay u guto danab sare.
7. Connect ServiceRanger iyo u arkaan Monitor Data PID 116 loo yaqaan "fili karo Battery High-danab." Isticmaalka SPN 520323 waayo xidhiidh J1939 "Battery danab RB" (Relay Box).
8. danab waa in uu noqdo 30 volts ama ka yar. Haddii danab ku xusan yahay 30 volts, uma shaqeeyaan on gaariga iyo xiriiri Eaton® ee 1-800-826-HELP (4357).
9. muhiim ah ka suuroggalaan Dami iyo sii wadi in lagu dhiso ama tallaabo dhib.
Note: danab ugu dhaco, si eber markii fure u off waa.

High-danab Service Power Up-Habka

1. Ku rakib dhan Xidhiidhiyayaasha a high-voltage galay ay qufulan.
2. Haddii aad tahay qof ka shaqeeya on gaariga, ka saar qaybta ka joojinta iyo tag.
3. Dib qaybta ka joojinta badan Switch Service.
4. Jiid Adeegga beddelo baxay oo ha set baabuurta 2 daqiiqo.
5. gaari bilow marka ay habboon tahay.

Eaton Qeybta Hybrid oo isku xira Location

Eaton Qeybta Hybrid iyo Goobaha isku xira MY08 Systems

Eaton Qeybta Hybrid oo isku xira Location MY09 Systems

Eaton Qeybta Hybrid iyo Goobaha isku xira MY09 Systems

STEP 1. Hubi xaaladda code qalad iyo sii-qoraha / Generator circuit sensor Heerkulka

  1. Ceshano codes qalad Active iyo FMIs la ServiceRanger isticmaalaya Baarista 9-Jidka isku xira.
  2. Waa kuwee FMIs joogaan?
    • Haddii FMI 10 waxaa ku qoran, tag #3.
    • Haddii FMI 23 waxaa ku qoran, IMF 23 ayaa lagu wadaa ay sabab u tahay kulaylka xad-dhaaf ah xajin. Tani waxay dhici karaan marka ceejinta loo isticmaalaa sida buuraha qabtay ama xajin a madhay waa simbiriirixanaysaa on fasalada uga yaacday / dheer. La xiriir Eaton ee 1-800-826-HELP (4357).
  3. waa khalad Code 64 sidoo kale Active?
    • Haa, tag eed Code 64 – ECA Babaca.
    • No, tag #4.
  4. 1. Ma Babaca Code 27 IMF 13 Active?

STEP 2. Hubi hawlgalka xajin ah.

  1. Key on.
  2. Bilow engine.
  3. Wado baabuur ku hoos load ee marsho ugu sareeya. Xawaare joogto ah, si dhakhso ah oo si buuxda u riix oo qaban ceejinta ah:
    • Haddii Babaca Code 26 waa Active, bedeli Lidka ku. Eeg CLMT-0365 waayo, nidaamka rakibo. Tag Tallaabada 3.
    • Haddii Babaca Code 26 waa Wax qabad la'aan, baaritaanka waa complete. Tag Tallaabada 3.

STEP 3. Hubi dayactirka.

  1. Key off.
  2. Dib isugu xir dhammaan xiriiriyeyaasha iyo xarkaha batteriga taban.
  3. Key on.
  4. codes Clear, arki Unu qabad la'aan Clear.
  5. Wado baabuur iyo isku dayaan in ay dib code ka.
  6. Hubi codes, arki View unu Active iyo Wax qabad la'aan.
    • Haddii codes ma, baaritaanka waa complete.
    • Haddii Code qalad 26 u muuqataa, heli qalad in imtixaanka, tag Tallaabada 1.
    • Haddii code kale oo aan ahayn 26 u muuqataa, arki Khalad List Code Index.

Qof kasta oo gudbinta qayb aad u baahan tahay aynu u leeyihiin! maalin isku mid ah maraakiibta la heli karo, dunida oo dhan.

U BAAHAN TAAGEERO FREE KA MID khubaro OUR?

WAC NOW
email US