Hybrid Eaton Fuller Gudbinta Babaca Code 27 – saareen Lidka

Khalad code for Hybrid Eaton daydo Systems Drive (MY08) Cuneyso-8E306A-U, Cuneyso-8E306A-UPG, Cuneyso-8E306A-UP, Cuneyso-8E306A-CD, Cuneyso-8E306A-T, Cuneyso-6E606B-CD, (MY09) Cuneyso-8E406A-U / P, Cuneyso-8E406A-UP, Cuneyso-8E406A-UPG, Cuneyso-8E406A-CD, Cuneyso-8E406A-CDG, Cuneyso-8E406A-guud, Cuneyso-8E406A-T, Cuneyso-6E706B-CD, Cuneyso-6E706B-P iyo aad cuneyso-6E706B-UPG. Read hoose si aad u bartaan sida si ay u tijaabiso, nadiifiso iyo hagaajin qalad code qalad aad Freightliner, Mack, Peterbilt, Kenworth, Volvo, International, iyo gaari xamuul culus-waajib iyo qalabka. shirka ayaa si farsamaysan xajin gacanta iyada oo Lidka Electric ah leewarka (ECA) oo la dhajinta on guryaha xajin. The Control Module Hybrid (Gudiga sare) gacanta ku meel ECA iyo kormeera dhowr doorsoomayaal si loo ogaado haddii ay jiraan walaac warqada ku xajin ah marka ay tahay in booska u xiran yihiin.

khalad Code 2 – motor / Generator Ogaanshaha sensor Heerkulka

The shuruud soo socda waa in la buuxiyaa ka hor inta nidaamka ogaadaa gardarrada:

  • Gudiga sare danab suuroggalaan waa ka weyn yahay 7 volts iyo ka yar 16 volts.
  • ECA danab suuroggalaan waa ka weyn yahay 7 volts iyo ka yar 16 volts.

Xaaladaha in Calan Babaca Code Active

  • IMF 7 ayaa lagu wadaa markii Xuddunta engine ka wada weyn yahay 400 N * m, Xuddunta engine amray waa in ka yar 0 waayo, 0.3 seconds iyo booska xajin amray u furan yahay 1 labaad la meel marsho u xaqiijiyay in dhex-dhexaad ah. Or, haddii xawaaraha aqbasho xajin waa ka weyn yahay 300 RPM, xawaaraha saarka xajin ka wada weyn yahay 300 RPM, xajin la amray furan, waayo, 1 labaad, iyo qalabka la doortay waa mid dhexdhexaad ah oo leh wax kasta oo kor ku xusan in ay run, waayo, 10 seconds.
  • IMF 13 ayaa lagu wadaa markii ECA ku fashilanto in ay iiraacshay inta lagu jiro kor u awood ay sabab u tahay arrin farsamo ku qabanaya iyo ma jiraan unu kale ECA joogo.
  • IMF 14 is set when the HCM has commanded the ECA to disengage the clutch and the Input Shaft Speed is greater than 315 RPM for more than 11 seconds with the transmission in neutral and the engine running.

Uugu Marka Babaca Code 2 ayaa lagu wadaa shuruudaha soo socda dhici:

  • Red "Stop Hybrid" illuminates light.
  • Amber "Hubi Hybrid" iftiin iftiiminaya for FMI 14.
  • Gaf waxa lagu kaydiyaa Control Module Hybrid (Gudiga sare) xusuusta.
  • Haddii qalad ay taasi dhacdo halka baabuur-wadidda, gaariga sii wadaan in ay ku shaqeeyaan iyo gudbinta baddalo doonaa si dhexdhexaad ah mar gaariga joojiyo.

Xaaladaha in Calan Babaca Code qabad la'aan

Kaliya unu qabad la'aan la nadiifiyay karaa Unit Gudbinta Electronic Control ah (TECU) ama taariikhda HCM isticmaalaya ServiceRanger. TECU ayaa si toos ah oo ansixiyay unu ka dib markii taariikhda 200 saacadood iyo HCM si toos ah oo ansixiyay unu ka soo taariikhda ka dib qalad uu Wax qabad la'aan, waayo, 200 saacadood.

code qalad Tani waxaa keeni kara wax ka mid ah kuwan soo socda:

  • IMF 7
    • Lidka Assembly
    • ECA
  • IMF 13, 14
    • Lidka Assembly
    • Cross-fallaadhihii

khalad Code 2 – Motor / Generator Test sensor Heerkulka

STEP 1. : Hubi xaaladda code qalad Active ama qabad la'aan.

  1. Ceshano codes qalad Active iyo FMIs la ServiceRanger isticmaalaya Baarista 9-Jidka isku xira ama gacanta.
  2. Haddii Babaca Code 64 waxaa ku qoran:
    • Haddii Babaca Code 27 IMF 7 ama 13 waxay ku qoran yihiin la Babaca Code Active 64, arki khalad Code 64 – ECA Babaca.
    • Haddii Babaca Code 27 IMF 7 waxaa ku qoran oo aan lahayn code qalad Active 64, tag Tallaabada 2.
    • Haddii Babaca Code 27 IMF 13 waxaa ku qoran oo aan lahayn Babaca Code Active 64, tag Tallaabada 3.

STEP 2. Hubi set FMI.

  1. Key on.
  2. Bilow engine.
  3. Launch gaariga iyo drive ilaa marsho 6-dii waa la helay. Markaasuu hoos joogsiga a.
  4. Ku celi furitaanka 5 jeer.
  5. Ma FMI 7 Active?
    • Haddii FMI 7 waa Active, bedeli Lidka ku. Eeg CLMT0365 habka loo xirxiro. Tag Tallaabada 4.
    • Haddii FMI 7 waa Wax qabad la'aan, baaritaanka waa complete. Tag Tallaabada 4.

STEP 3. Hubi daacad ah Cross-usheeda Golaha.

  1. Key off.
  2. ka Gudbinta Housing saar Electric Lidka leewarka.
  3. Isku dayaan in ay isku shaandheyn ku-Cross usheeda dhexe iyo Golaha harqood by gacanta.
    • Haddii Cross-usheeda Golaha bedbedeli by gacanta ka Release ku kacaan Case Gudbinta ah, bedeli Lidka ku. Eeg CLMT0365 habka loo xirxiro. Tag Tallaabada 4.
    • Haddii Golaha Cross-usheeda dhexe uusan isku shaandheyn by gacanta, badalo-Cross usheeda dhexe, bushings, iyo dufan. Ku celi tallaabo this.

STEP 4. Hubi dayactirka.

  1. Key off.
  2. Dib isugu xir dhammaan xiriiriyeyaasha iyo xarkaha batteriga taban.
  3. Key on.
  4. codes Clear, arki Unu qabad la'aan Clear.
  5. Wado baabuur iyo isku dayaan in ay dib code ka.
  6. Hubi codes, arki View unu Active iyo Wax qabad la'aan.
    • Haddii codes ma, baaritaanka waa complete.
    • Haddii Code qalad 27 u muuqataa, heli qalad in imtixaanka, tag Tallaabada 1.
    • Haddii code kale oo aan ahayn 27 u muuqataa, arki Khalad List Code Index.

Qof kasta oo gudbinta qayb aad u baahan tahay aynu u leeyihiin! maalin isku mid ah maraakiibta la heli karo, dunida oo dhan.

U BAAHAN TAAGEERO FREE KA MID khubaro OUR?

WAC NOW
email US