Hybrid Eaton Fuller Gudbinta Babaca Code 128 – Unit APG 1 Gaf KARAA

Khalad code for Hybrid Eaton daydo Systems Drive (MY09) Cuneyso-8E406A-U / P, Cuneyso-8E406A-UP, Cuneyso-8E406A-UPG, Cuneyso-8E406A-CD, Cuneyso-8E406A-CDG, Cuneyso-8E406A-guud, Cuneyso-8E406A-T, Cuneyso-6E706B-CD, Cuneyso-6E706B-P iyo aad cuneyso-6E706B-UPG. Read hoose si aad u bartaan sida si ay u tijaabiso, nadiifiso iyo hagaajin qalad code qalad aad Freightliner, Mack, Peterbilt, Kenworth, Volvo, International, iyo gaari xamuul culus-waajib iyo qalabka. The darran Power Generator (APG) waxaa a inverter 5kW / 5kVA DC / AC xiran a high-voltage baska DC ee nidaamka gaariga Eaton hybrid korontada. Waxaa abuuraa 60 -Hal waji 120V AC awood Hz ee codsiyada utility. Area Network maamusha The (CAN) waa-xawaaraha sare 500K labada ciyaaryahan qaloocin link xogta lahaansho ah oo isku xira HCM si Lidka Electric ah leewarka (ECA), Power Electric Carrier (PEC), Inverter iyo APG. link The ka mid ah waxaa ku jira 120 Ohm resistor dhamaadka kasta. link waxaa loo isticmaalaa in ay u gudbiyaan macluumaad gaar ah
si ay u xajin hawlgallada booska iyo xoogga korontada.

khalad Code 128 – Unit APG 1 Gaf KARAA Ogaanshaha

The shuruud soo socda waa in la buuxiyaa ka hor inta nidaamka ogaadaa gardarrada:

  • Gudiga sare waa ku shaqeeya oo danab suuroggalaan waa ka weyn yahay 7 volts iyo ka yar 16 volts.
  • Gudiga sare Data Link qalad (khalad Code 60) ma aha Active.

Note: Marka dhib code ah Wax qabad la'aan tixraac ah Product Baarista Mode (PDM)

Xaaladaha in Calan Babaca Code Active

  • IMF 9 ayaa lagu wadaa haddii xidhiidhka ka unit APG aan la helin, waayo, 7.5 seconds iyo waxa la filayaa in la helay oo ku salaysan goobaha qaabeynta (gaari nooca-model iyo tirada Talada).

Uugu Marka Babaca Code 128 ayaa lagu wadaa shuruudaha soo socda dhici:

  • Amber "Check Hybrid" illuminates light.
  • Gaf waxa lagu kaydiyaa Control Module Hybrid (Gudiga sare) xusuusta.
  • Haddii qalad ah oo dhigaya amarka on, APG weli off.
  • Haddii qalad ah oo dhigaya inta lagu jiro hawlgalka, APG xirmin off.

Xaaladaha in Calan Babaca Code qabad la'aan

Kaliya unu qabad la'aan la nadiifiyay karaa Unit Gudbinta Electronic Control ah (TECU) ama taariikhda HCM isticmaalaya ServiceRanger. TECU ayaa si toos ah oo ansixiyay unu ka dib markii taariikhda 200 saacadood iyo HCM si toos ah oo ansixiyay unu ka soo taariikhda ka dib qalad uu Wax qabad la'aan, waayo, 200 saacadood.

code qalad Tani waxaa keeni kara wax ka mid ah kuwan soo socda:

  • IMF 9
    • Xogta Link CAN dhow APG
    • APG

khalad Code 128 – Unit APG 1 Gaf KARAA Test

Aqoonsiga Qeybta:

APG 8-way low-voltage harness connector

APG 8-jidka isku xira suunka low-danab

Eaton Fuller transmission 9 pin diagnostic connector

9-pin isku xira ogaanshaha

FIIRO GAAR AH: U dir ka Eaton Qeybta Hybrid oo isku xira Location waayo, Goobaha isku xira in Systems MY08

STEP 1.Verify status firfircoon ama qabad la'aan code qalad iyo hadiyad FMIs.

  1. Dib u eeg oo raaca digniinaha & ganaaxyada.
  2. Ceshano codes qalad Active iyo FMIs la ServiceRanger isticmaalaya Baarista 9-Jidka isku xira.
  3. Key off.
    Danger: Eeg High-Voltage Service Shutdown and Power-Up Procedures. Raac habraaca si looga fogaado filaan ah, gubaan ama dhimasho ka khaldan u maareeyeen a high-voltage.
  4. Waa kuwee FMIs joogaan?
    • Haddii FMI 9 waa Active, tag Tallaabada 2.

STEP 2. Hubi iska caabin ah ee isku xira Baarista ee.

  1. Cabir iska caabin ah u dhexeeya soo socda:
    • 9-Jidka isku xira Baarista Pin H iyo J Pin
    • 2-Jidka isku xira Data Link Pin 1 iyo Pin 2
    • 3-Jidka isku xira Data Link Pin A iyo B Pin
      Note: The 3-Way and 2-Way Data Link Connectors are located next to the 9-Way Diagnostic Connector.
      Note: Hubi volt / meter Ohm waa on qiyaasta saxda ah (ku dhowaad 200 qiyaasta Ohm).

      • Haddii iska caabin ah u dhexeeya Pin H iyo J Pin, Pin A iyo B Pin, ama Pin 1 iyo Pin 2 waa inta u dhaxaysa 50-70 ohms,
        tag Tallaabada 3.
      • Haddii iska caabin ah waa ka roon yahay 70 ohms, mid ama ka badan resistors gabagabaynta on Link Data CAN ee la habeeyo waa mid ka maqan ama ka duwan, ama waxaa jira furan in link. Dayactir ka OEM CAN Data Link la habeeyo, ka dibna tag Tallaabada 4.
      • Haddii iska caabin ah uu ka yar yahay 50 ohms, waxaa jira joogo resistor gabagabaynta dheeraad ah. Dayactir ka OEM CAN Data Link la habeeyo, ka dibna tag Tallaabada 4.

STEP 3. Hubi iska caabin ah APG la habeeyo.

  1. Key off.
  2. Barkinta cable ka batari negative.
  3. Barkinta ee isku xira APG 8-Jidka at APG.
  4. Cabir iska caabin ah u dhexeeya APG 8-Jidka isku xira Pin 4 iyo Pin 5:
    Note: Hubi volt / meter Ohm waa on qiyaasta saxda ah (ku dhowaad 200 qiyaasta Ohm).
  5. Haddii iska caabin ah u dhexeeya Pin 4 iyo Pin 5 waa inta u dhaxaysa 110-130 ohms, bedeli Inverter APG. Eeg saarista MY09 Inverter iyo nidaamka Rakibaadda ee TRSM2000, ka dibna tag Tallaabada 4.
  6. Haddii caabiga ka baxsan kala duwan ee, dhiso CAN Data Link la habeeyo, ka dibna tag Tallaabada 4.

STEP 4. Hubi dayactirka.

  1. Key off.
  2. Xidhmaan oo dhan Xidhiidhiyayaasha iyo cable ka batari negative.
    digniin: Eeg High-Voltage Service Shutdown and Power-Up Procedures. Raac habraaca si looga fogaado filaan ah, gubaan ama dhimasho ka khaldan u maareeyeen a high-voltage.
  3. Key on.
  4. Shaqeeyaan APG iyo isku dayaan in ay dib code ka.
  5. Hubi codes, arki View unu Active iyo Wax qabad la'aan.
    • Haddii codes ma, baaritaanka waa complete.
    • Haddii Code qalad 128 u muuqataa, heli qalad in imtixaanka, tag Tallaabada 1.
    • Haddii code kale oo aan ahayn 128 u muuqataa, arki Khalad List Code Index.

Qof kasta oo gudbinta qayb aad u baahan tahay aynu u leeyihiin! maalin isku mid ah maraakiibta la heli karo, dunida oo dhan.

U BAAHAN TAAGEERO FREE KA MID khubaro OUR?

WAC NOW
email US