Hybrid Eaton Fuller Gudbinta Babaca Code 117 – Control Battery Unit Relay Goo Request

Khalad code for Hybrid Eaton daydo Systems Drive (MY08) Cuneyso-8E306A-U, Cuneyso-8E306A-UPG, Cuneyso-8E306A-UP, Cuneyso-8E306A-CD, Cuneyso-8E306A-T, Cuneyso-6E606B-CD, (MY09) Cuneyso-8E406A-U / P, Cuneyso-8E406A-UP, Cuneyso-8E406A-UPG, Cuneyso-8E406A-CD, Cuneyso-8E406A-CDG, Cuneyso-8E406A-guud, Cuneyso-8E406A-T, Cuneyso-6E706B-CD, Cuneyso-6E706B-P iyo aad cuneyso-6E706B-UPG. Read hoose si aad u bartaan sida si ay u tijaabiso, nadiifiso iyo hagaajin qalad code qalad aad Freightliner, Mack, Peterbilt, Kenworth, Volvo, International, iyo gaari xamuul culus-waajib iyo qalabka. The high-voltage relays are located inside the Power Electronics Carrier (PEC) ee unit Relay Box. Relays Kuwani caadi ahaan u furan yihiin marka nidaamka off waa. The relays are controlled through the Inverter and monitored through a 5-volt input from the Inverter. If the relays are open the voltage is around 5 volts iyo markii Relays ku xiran yihiin danab ku wareegsan yahay 1 volt.

khalad Code 117 – Control Battery Unit Relay Goo Request Ogaanshaha

The shuruud soo socda waa in la buuxiyaa ka hor inta nidaamka ogaadaa gardarrada:

  • danab suuroggalaan Inverter waa ka weyn yahay 7 volts iyo ka yar 16 volts.

Note: Marka dhib code ah Wax qabad la'aan tixraac ah Product Baarista Mode (PDM)

Xaaladaha in Calan Babaca Code Active

  • IMF 3 ayaa lagu wadaa markii Unit Control Battery (BCU) Relay Ready CAN Flag waa Active iyo signal Relay Off ayaa lagu wadaa sare ah 0.02 seconds.
  • IMF 14 ayaa lagu wadaa marka codsiga Relay gooyaa of BCU waxaa u sarreeyey link xogta CAN ah.
  • IMF 29 ayaa lagu wadaa markii signal Relay Off waa Active.

Uugu Marka Babaca Code 117 ayaa lagu wadaa shuruudaha soo socda dhici:

  • Amber "Check Hybrid" illuminates light.
  • Gaf waxa lagu kaydiyaa Control Module Hybrid (Gudiga sare) xusuusta.
  • Inverter xidho nidaamka a high-voltage off.
  • Gudiga sii si loo xakameeyo gaariga hybrid ah in hab naaftada kaliya.
  • la bixin kari Gudbinta bilaabi marsho in 1aad.

Xaaladaha in Calan Babaca Code qabad la'aan

Kaliya unu qabad la'aan la nadiifiyay karaa Unit Gudbinta Electronic Control ah (TECU) ama taariikhda HCM isticmaalaya ServiceRanger. TECU ayaa si toos ah oo ansixiyay unu ka dib markii taariikhda 200 saacadood iyo HCM si toos ah oo ansixiyay unu ka soo taariikhda ka dib qalad uu Wax qabad la'aan, waayo, 200 saacadood.

code qalad Tani waxaa keeni kara wax ka mid ah kuwan soo socda:

  • IMF 3, 29
    • PEC (MY08)
    • Inverter
    • Low danab Wire la habeeyo
  • FM 14
    • PEC

khalad Code 117 – Control Battery Unit Relay Goo Request

Qeybta Aqoonsiga MY08 Systems:

Delphi 56-Jidka isku xira rimay View

Delphi 56-Jidka isku xira rimay View
(Inverter – Isku xira danab Low)

Deutsch 19-Jidka rimay view isku xira

Deutsch 19-Jidka rimay view isku xira
(PEC – Isku xira danab Low)

FIIRO GAAR AH: U dir ka Eaton Qeybta Hybrid oo isku xira Location waayo, Goobaha isku xira in Systems MY08

Inverter-to-PEC Relay -MY08

Qeybta Aqoonsiga MY09 Systems:

Duetsch 40-jidka isku xira view weheshiga

Delphi 40-Jidka isku xira rimay View
(Inverter – Isku xira danab Low)

Deutsch 19-Jidka rimay view isku xira

Deutsch 19-Jidka rimay view isku xira
(PEC – Isku xira danab Low)

FIIRO GAAR AH: U dir ka Eaton Qeybta Hybrid oo isku xira Location waayo, Goobaha isku xira in Systems MY09.

Inverter-to-PEC Relay -MY09
digniinaha & ganaaxyada

Danger: Danger muujinaysaa aad la si xun u dhaawacmay doonaa ama la dilay haddii aadan raaci doonaa habraaca ku tilmaamay.
digniin: Digniin halis degdeg ah, taas oo keeni karta dhaawac shakhsi daran haddii aadan raaci doonaa habraaca ku tilmaamay.
digniin: Digniin muujinaysaa gaariga ama hantida dhaawac dhici kara haddii aadan raaci doonaa habraaca ku tilmaamay.

Note: Note muujinaysaa faahfaahin dheeraad ah u gargaartaan in cudurka ama dayactir ah component / Nidaamka.

Raac hannaanka ku qeexan amarka tilmaamay in ay ka fogaadaan dhaawac shakhsi ahaaneed:

1. Haddii loo yaqaano a high-voltage yihiin hareeraha baabuurka iyo ka joojinta la geliyo PEC ah, qofka kaliya ee la ogol yahay waa in ay u bilaabaan gaariga uu yahay qofka saxiixay tag joojinta.
2. Ka hor inta shaqeeya on gaari ama ka soo baxaya cab halka engine la socda, waa in aad meel lever wareeg ee "N" dhigay jejebiyey la dhigto, iyo xannibi giraangirihiina.
3. Sababo nabadgelyo, had iyo jeer ka qayb biriiga adeegga ka hor doorashada jagooyinka marsho ka "N."
4. Ka hor inta aadan bilaabin gaari had iyo jeer la fadhiya kursiga darawalka, dooro "N" on gacanta ku wareejin ah, oo qarka u saaran biriiga la dhigto.
5. In baabuurta la ePTO, engine iyo / ama
Motor / Generator bilaabi kartaa in hab ePTO. Marna qabtaan dayactirka ama shaqeeyaan gaadiidka, halka hab this.
6. 12-Waat Battery wanaagsan (+) iyo negative (-) waa in la hor ineysan si alxanka kasta oo gaari kasta Hybrid qalabaysan.

digniin: Raac hannaanka ku qeexan amarka tilmaamay in ay ka fogaadaan cillad qalabka ama dhaawac.
digniin: Ha sii daayo jejebiyey la dhigto ama isku dayaan in ay doortaan marsho ilaa cadaadiska hawada waa heerka saxda ah.
digniin: Si looga fogaado waxyeelo ay ku gudbinta lagu jiro jiidaya meesha lever wareeg ee "N" oo kor u giraangiraha drive ka off dhulka ama barkinta driveline ah.

Digniinaha High-danab & ganaaxyada

  • Isticmaal CO2 ama qallalan Chemical Dab bakhtiiyeyaasha.
  • The taararka a high-voltage waxaa daboolay ningax orange ama tubbada convoluted iyo sumadaha digniin at Xidhiidhiyayaasha ku calaamadsan.
  • All Hybrid Eaton® Diesel / baabuurta Electric waxaa la qorayaa 'Hybrid’ dibaddeeda oo gaariga, oo ay la socdaan calaamad wareejin on dumisaan ah.
  • U dir ka OEM meel gaarka ah ee jiifku Jaha qaybaha hybrid.
  • HA jarjar ah fiilooyinka a high-voltage orange.
  • HA jarjar ama furo PEC ah.
  • HA jarjar ama furo Converter DC / DC.
  • HA jarjar ama furo Inverter ah.

aag-dhuleed A waa in kor loo dhigay iyo high-voltage dahaaran gacno gashi rabar (fasalka 0 la sokeeye maqaar) waxaa loo baahan yahay ka hor inta aan la shaqeeyo on a high-voltage. Dhicitaanka in la raaco tilmaamaha keeni kartaa in dhaawac shakhsi aad u daran ama dhimasho.
gacmo gashi The caag-dahaaran tahay in la xirto, halka ka shaqeeya nidaamka a high-voltage yihiin fasalka 0 la sokeeye maqaar. gacno gashi rabar ah waa in la baaro inta aan la isticmaalin KASTA socda nidaamka caag imtixaanka gashi ningax laga helay "Tools Baarista / Publications Service" ee bogga 6. Dhicitaanka in la raaco tilmaamaha keeni kartaa in dhaawac shakhsi aad u daran ama dhimasho.
Ka hor baarista ama ka shaqeeya fiilooyin a high-voltage ama qaybaha "Habka Adeegga xiritaanka High-danab iyo Power Up-" ee bogga 4 Waa in la raaco. Dhicitaanka in la raaco tilmaamaha keeni kartaa in dhaawac shakhsi aad u daran ama dhimasho.
The qalabka Shaqoxannibista iyo Tagout waa saaro kaliya farsamo yaqaan ah in kaalinta qalabka Shaqoxannibista iyo Tagout on gaariga. Dhicitaanka in la raaco tilmaamaha keeni kartaa in dhaawac shakhsi aad u daran ama dhimasho.
High-danab gacno gashi rabar dahaaran (fasalka 0 la sokeeye maqaar) waa in la gashanaadaa markuu ka shaqeeya kasta
fiilooyinka a high-voltage. The "xiritaanka High-danab Service iyo Power Up-Habka" ee bogga 4 waa in la hor raacay in ay ka saareen wax fiilooyinka a high-voltage. Dhicitaanka in la raaco tilmaamaha keeni kartaa in dhaawac shakhsi aad u daran ama dhimasho.
fiilooyinka High-danab iyo xarkaha waa orange iyo waxa ku jira qoran calaamadda digniinta ee Xidhiidhiyayaasha ah. qaybaha High-danab waxaa lagu calaamadeeyay leh calaamadda a. High-danab gacno gashi rabar dahaaran (fasalka 0 la sokeeye maqaar) waa in la isticmaalaa marka ka shaqeeya mid ka mid ah qaybaha kuwaas oo. Dhicitaanka in la raaco tilmaamaha keeni kartaa in dhaawac shakhsi aad u daran ama dhimasho.

Nidaamka High-danab xiritaanka Service

Xiritaanka Service High-danab iyo Habka Power Up-1. Raac "High-danab Work Area" nidaamka.
2. Hel ka Switch Service PEC cas on hore ee PEC iyo riixdo demiso.
3. Ka saar Cover Switch Service iyo rakibi qaybta ka joojinta (J48506).
4. tag giijin in qaybta ka joojinta.
5. Hubi in ay Switch Service PEC aan ka booska off dhaqaajin karin.
6. U ogolow nidaamka si ay u dejiyaan ugu yaraan 5 daqiiqo oo ay u guto danab sare.
7. Connect ServiceRanger iyo u arkaan Monitor Data PID 116 loo yaqaan "fili karo Battery High-danab." Isticmaalka SPN 520323 waayo xidhiidh J1939 "Battery danab RB" (Relay Box).
8. danab waa in uu noqdo 30 volts ama ka yar. Haddii danab ku xusan yahay 30 volts, uma shaqeeyaan on gaariga iyo xiriiri Eaton® ee 1-800-826-HELP (4357).
9. muhiim ah ka suuroggalaan Dami iyo sii wadi in lagu dhiso ama tallaabo dhib.
Note: danab ugu dhaco, si eber markii fure u off waa.

High-danab Service Power Up-Habka

1. Ku rakib dhan Xidhiidhiyayaasha a high-voltage galay ay qufulan.
2. Haddii aad tahay qof ka shaqeeya on gaariga, ka saar qaybta ka joojinta iyo tag.
3. Dib qaybta ka joojinta badan Switch Service.
4. Jiid Adeegga beddelo baxay oo ha set baabuurta 2 daqiiqo.
5. gaari bilow marka ay habboon tahay.

Eaton Qeybta Hybrid oo isku xira Location

Eaton Qeybta Hybrid iyo Goobaha isku xira MY08 Systems

Eaton Qeybta Hybrid oo isku xira Location MY09 Systems

Eaton Qeybta Hybrid iyo Goobaha isku xira MY09 Systems

STEP 1. Hubi joogo FMIs.

  1. Dib u eeg oo raaca digniinaha & ganaaxyada.
  2. Ceshano codes qalad Active iyo FMIs la ServiceRanger isticmaalaya Baarista 9-Jidka isku xira.
  3. Key off.
    Danger: Eeg High-Voltage Service Shutdown and Power-Up Procedures. Raac habraaca si looga fogaado filaan ah, gubaan ama dhimasho ka khaldan u maareeyeen a high-voltage.
  4. Waa kuwee FMIs joogaan?
    • Haddii Babaca Code 117 IMF 14 waxaa ku qoran, baaritaanka waa complete. IMF 14 requires no action or replacement.
    • Haddii Babaca Code 117 IMF 3 ama 29 waxay ku qoran yihiin, tag Tallaabada 2.

STEP 2. Hubi codes qalad joogo.

  1. View unu firfircoon si aad u aragto haddii mid ka mid ah kuwan soo socda ku qoran yihiin: 76, 77, 78, 79, 82, 86, 101, 102, 103, 104, 105, 106, 107, 108, 109:
    • Haddii mid ka mid ah unu ay ku qoran yihiin la Babaca Code 117 IMF 3, tagaan si ay baaritaan unu in ay yihiin Active.
    • Haddii mid ka mid ahaa unu ay ku qoran yihiin la Babaca Code 117 IMF 3, tag Tallaabada 3.
    • If none of the faults are listed with FMI 29, tag Tallaabada 4.

STEP 3. Hubi joogtada u dhaxaysa PEC isku xira iyo Inverter isku xira.

  1. Key off.
  2. Barkinta PEC 19-Jidka isku xira.
  3. Barkinta Inverter ee 56-Jidka isku xira(MY08) /Inverter 40-Jidka isku xira(MY09) .
  4. Cabir iska caabin ka isku xira PEC 19-Jidka Pin 5 si Inverter ee 56-Jidka isku xira Pin 43 (MY08) / Inverter 40-Jidka isku xira
    pin 13:(MY09).
    Note:(MY08) Gently flex the Inverter 56-Way Connector Harness near the Connector while monitoring the resistance readings.

    • (MY08) Haddii iska caabin ah u dhexeeya Pin 5 iyo Pin 43 waa 0-0.3 ohms, tag Tallaabada 4.
      (MY09) Haddii iska caabin ah u dhexeeya Pin 5 iyo Pin 13 waa 0-0.3 ohms, bedeli Inverter ah. Ka dibna tag Tallaabada 6
    • Haddii iska caabin ah ka baxsan ee kala duwan, bedeli Low-danab Gudiga sare ee la habeeyo dhexeeya PEC iyo Inverter, ka dibna tag Tallaabada 6.

STEP 4. Hubi sii Vehicle la habeeyo iyo dhulka.

MY08

  1. Key off.
  2. Cabir iska caabin ah u dhexeeya isku xira Inverter 56-Pin ah Pin 48 in Pin 49, iyo Pin 47 si ay dhulka.
    • Haddii iska caabin ah oo u dhexeeya Pin 48 iyo Pin 49 waa 0-0.3 ohms iyo iska caabin ka Pin 47 si ay dhulka waa 0-0.5 ohms, tag Tallaabada 5.
    • Haddii iska caabin ah ka baxsan ee kala duwan, bedeli Low-danab Gudiga sare ee la habeeyo dhexeeya PEC iyo Inverter, ka dibna tag Tallaabada 6.

MY09

  1. Key off.
  2. Ka saar ee isku xira 40-Way ka Inverter ah.
  3. Use an ohm meter to measure the resistance from Pin 3 si ay dhulka ugu la habeeyo Vehicle ah:
    • Haddii iska caabin ah u dhexeeya Pin 3 to ground is 0–0.3 ohms, bedeli Inverter ah, ka dibna tag Tallaabada 6.
    • caabin f waa ka baxsan kala duwan, repair 40-Way Vehicle Harness, ka dibna tag Tallaabada 6.

STEP 4. Hubi danab ee Converter DC / DC.

  1. Key on.
  2. View soo socda oo xuduudaheedu Data Monitor:
    • PID 121 "DC / DC danab Output Converter."
    • PID 165 "Danab la fili karo Battery."
      • Haddii PID 165 waa 0.5 volts ka yar PID 121, lagu dhiso ama lagu badalo DC / DC Converter Power Supply la habeeyo in awoodaha System Battery 12-Waat ah, ka dibna tag Tallaabada 5.
      • Haddii PID 121 waa 0.5 volts ka yar PID 165, cusboonaysiiyo silig warcelin danab in uu ka Pin ah 1 oo ka mid ah Converter DC / DC si Pin 19 ee Gudiga sare ee. Tag Tallaabada 5.

STEP 5. (MY08) Cabir iska caabin ah oo ka mid ah DC Interlock Low-danab Loop.

      1. Key off.
        digniin:Eeg High-Voltage Service Shutdown and Power-Up Procedures. Raac habraaca si looga fogaado filaan ah, gubaan ama dhimasho ka khaldan u maareeyeen a high-voltage.
      2. Barkinta ka Cable DC High-danab ee Inverter iyo PEC ah.
        • Measure the resistance between the Low-Voltage Interlock Pins in the DC Connector on the Inverter end. If resistance between the low-voltage Interlock Pins is 0–0.3 ohms, bedeli Inverter ah, ka dibna tag Tallaabada 6.
        • Haddii iska caabin ah ka baxsan ee kala duwan, replace the DC Interlock Low-Voltage Loop, ka dibna tag Tallaabada 6.

STEP 6. Hubi dayactirka.

  1. Key off.
  2. Xidhmaan oo dhan Xidhiidhiyayaasha iyo cable ka batari negative.
  3. Key on.
  4. codes Clear, arki Unu qabad la'aan Clear.
  5. Wado baabuur iyo isku dayaan in ay dib code ka.
  6. Hubi codes, arki View unu Active iyo Wax qabad la'aan.
    • Haddii codes ma, baaritaanka waa complete.
    • Haddii Code qalad 117 u muuqataa, heli qalad in imtixaanka, tag Tallaabada 1.
    • Haddii code kale oo aan ahayn 117 u muuqataa, arki Khalad List Code Index.

Qof kasta oo gudbinta qayb aad u baahan tahay aynu u leeyihiin! maalin isku mid ah maraakiibta la heli karo, dunida oo dhan.

U BAAHAN TAAGEERO FREE KA MID khubaro OUR?

WAC NOW
email US