Hybrid Eaton Fuller Gudbinta Babaca Code 48 – J1939 Gudbinta Message (Gudiga sare)

Khalad code for Hybrid Eaton daydo Systems Drive (MY08) Cuneyso-8E306A-U, Cuneyso-8E306A-UPG, Cuneyso-8E306A-UP, Cuneyso-8E306A-CD, Cuneyso-8E306A-T, Cuneyso-6E606B-CD, (MY09) Cuneyso-8E406A-U / P, Cuneyso-8E406A-UP, Cuneyso-8E406A-UPG, Cuneyso-8E406A-CD, Cuneyso-8E406A-CDG, Cuneyso-8E406A-guud, Cuneyso-8E406A-T, Cuneyso-6E706B-CD, Cuneyso-6E706B-P iyo aad cuneyso-6E706B-UPG. Read hoose si aad u bartaan sida si ay u tijaabiso, nadiifiso iyo hagaajin qalad code qalad aad Freightliner, Mack, Peterbilt, Kenworth, Volvo oo gaari International. J1939 waa-xawaaraha sare qaloocin labada ciyaaryahan 250K link xogta la mid ah 120 Ohm resistor dhamaadka kasta oo ka mid link. The Control Module Hybrid (Gudiga sare) ku xiran link xogta J1939 ee 38-Jidka isku xira. link Tani gudbiya macluumaad si Gudiga sare iyo isgaarsiin la modules kale ee network sida Unit Gudbinta Control Electronic ah (TECU).

khalad Code 48 – J1939 Gudbinta Message (Gudiga sare) ogaanshaha

The shuruud soo socda waa in la buuxiyaa ka hor inta nidaamka ogaadaa gardarrada:

  • Gudiga sare danab suuroggalaan waa ka weyn yahay 7 volts iyo ka yar 16 volts.
  • Gaf J1939 isgaarsiinta link xogta waa qabad la'aan.

Note: Marka dhib code ah Wax qabad la'aan tixraac ah Product Baarista Mode (PDM)

Xaaladaha in Calan Babaca Code Active

  • IMF 9 ayaa lagu wadaa markii HCM ay ku guul daraysato in ay helaan xogta TECU waayo, 30 farriimo isku xigta ama ka badan, halka ay weli la xidhiidhka modules kale on J1939.

Uugu Marka Babaca Code 48 ayaa lagu wadaa shuruudaha soo socda dhici:

  • Amber "Check Hybrid" illuminates light.
  • Gaf waxa lagu kaydiyaa xasuusta HCM.
  • Red "Service" iftiin laga yaabaa in iftiimin iyo a "F" iftiimiyo laga yaabaa in qaab marsho ah ay sabab u tahay Active ah khalad Code 24.
  • mode Operation badala in hab "AutoShift oo keliya".
  • Electric Motor / Generator la taageero iyo noolaynta naafada ah; si kastaba ha ahaatee, ee Relays a high-voltage sii powered.
  • Haddii qalad ah oo dhigaya at kor xoog, the engine will not crank.
  • Haddii nooc gardarrada halka baabuur-wadidda, gaariga u wareejin doona; si kastaba ha ahaatee, marka gaariga joojiyo xajin furo oo weli ku jira booska u furan.
  • la bixin kari Gudbinta bilaabi marsho in 1aad.

Xaaladaha in Calan Babaca Code qabad la'aan

Kaliya unu qabad la'aan la nadiifiyay karaa Unit Gudbinta Electronic Control ah (TECU) ama taariikhda HCM isticmaalaya ServiceRanger. TECU ayaa si toos ah oo ansixiyay unu ka dib markii taariikhda 200 saacadood iyo HCM si toos ah oo ansixiyay unu ka soo taariikhda ka dib qalad uu Wax qabad la'aan, waayo, 200 saacadood.

code qalad Tani waxaa keeni kara wax ka mid ah kuwan soo socda:

  • IMF 2, 9
    • J1939 Data Link
    • TECU

khalad Code 48 – J1939 Gudbinta Message (Gudiga sare) Test

Aqoonsiga Qeybta:

Fuller la habeeyo Front View TECU - Vehicle Wajahadda isku xira

La habeeyo Front View
(TECU – Vehicle Wajahadda isku xira

La habeeyo Front View HCM - Vehicle Wajahadda isku xira

La habeeyo Front View
(Gudiga sare – Vehicle Wajahadda isku xira)

FIIRO GAAR AH: U dir ka Eaton Qeybta Hybrid oo isku xira Location waayo, Goobaha isku xira in Systems MY08

FIIRO GAAR AH: U dir ka Eaton Qeybta Hybrid oo isku xira Location waayo, Goobaha isku xira in Systems MY09.

Eaton Fuller TECU HCM isku xira
digniinaha & ganaaxyada

Danger: Danger muujinaysaa aad la si xun u dhaawacmay doonaa ama la dilay haddii aadan raaci doonaa habraaca ku tilmaamay.
digniin: Digniin halis degdeg ah, taas oo keeni karta dhaawac shakhsi daran haddii aadan raaci doonaa habraaca ku tilmaamay.
digniin: Digniin muujinaysaa gaariga ama hantida dhaawac dhici kara haddii aadan raaci doonaa habraaca ku tilmaamay.

Note: Note muujinaysaa faahfaahin dheeraad ah u gargaartaan in cudurka ama dayactir ah component / Nidaamka.

Raac hannaanka ku qeexan amarka tilmaamay in ay ka fogaadaan dhaawac shakhsi ahaaneed:

1. Haddii loo yaqaano a high-voltage yihiin hareeraha baabuurka iyo ka joojinta la geliyo PEC ah, qofka kaliya ee la ogol yahay waa in ay u bilaabaan gaariga uu yahay qofka saxiixay tag joojinta.
2. Ka hor inta shaqeeya on gaari ama ka soo baxaya cab halka engine la socda, waa in aad meel lever wareeg ee "N" dhigay jejebiyey la dhigto, iyo xannibi giraangirihiina.
3. Sababo nabadgelyo, had iyo jeer ka qayb biriiga adeegga ka hor doorashada jagooyinka marsho ka "N."
4. Ka hor inta aadan bilaabin gaari had iyo jeer la fadhiya kursiga darawalka, dooro "N" on gacanta ku wareejin ah, oo qarka u saaran biriiga la dhigto.
5. In baabuurta la ePTO, engine iyo / ama
Motor / Generator bilaabi kartaa in hab ePTO. Marna qabtaan dayactirka ama shaqeeyaan gaadiidka, halka hab this.
6. 12-Waat Battery wanaagsan (+) iyo negative (-) waa in la hor ineysan si alxanka kasta oo gaari kasta Hybrid qalabaysan.

digniin: Raac hannaanka ku qeexan amarka tilmaamay in ay ka fogaadaan cillad qalabka ama dhaawac.
digniin: Ha sii daayo jejebiyey la dhigto ama isku dayaan in ay doortaan marsho ilaa cadaadiska hawada waa heerka saxda ah.
digniin: Si looga fogaado waxyeelo ay ku gudbinta lagu jiro jiidaya meesha lever wareeg ee "N" oo kor u giraangiraha drive ka off dhulka ama barkinta driveline ah.

Digniinaha High-danab & ganaaxyada

  • Isticmaal CO2 ama qallalan Chemical Dab bakhtiiyeyaasha.
  • The taararka a high-voltage waxaa daboolay ningax orange ama tubbada convoluted iyo sumadaha digniin at Xidhiidhiyayaasha ku calaamadsan.
  • All Hybrid Eaton® Diesel / baabuurta Electric waxaa la qorayaa 'Hybrid’ dibaddeeda oo gaariga, oo ay la socdaan calaamad wareejin on dumisaan ah.
  • U dir ka OEM meel gaarka ah ee jiifku Jaha qaybaha hybrid.
  • HA jarjar ah fiilooyinka a high-voltage orange.
  • HA jarjar ama furo PEC ah.
  • HA jarjar ama furo Converter DC / DC.
  • HA jarjar ama furo Inverter ah.

aag-dhuleed A waa in kor loo dhigay iyo high-voltage dahaaran gacno gashi rabar (fasalka 0 la sokeeye maqaar) waxaa loo baahan yahay ka hor inta aan la shaqeeyo on a high-voltage. Dhicitaanka in la raaco tilmaamaha keeni kartaa in dhaawac shakhsi aad u daran ama dhimasho.
gacmo gashi The caag-dahaaran tahay in la xirto, halka ka shaqeeya nidaamka a high-voltage yihiin fasalka 0 la sokeeye maqaar. gacno gashi rabar ah waa in la baaro inta aan la isticmaalin KASTA socda nidaamka caag imtixaanka gashi ningax laga helay "Tools Baarista / Publications Service" ee bogga 6. Dhicitaanka in la raaco tilmaamaha keeni kartaa in dhaawac shakhsi aad u daran ama dhimasho.
Ka hor baarista ama ka shaqeeya fiilooyin a high-voltage ama qaybaha "Habka Adeegga xiritaanka High-danab iyo Power Up-" ee bogga 4 Waa in la raaco. Dhicitaanka in la raaco tilmaamaha keeni kartaa in dhaawac shakhsi aad u daran ama dhimasho.
The qalabka Shaqoxannibista iyo Tagout waa saaro kaliya farsamo yaqaan ah in kaalinta qalabka Shaqoxannibista iyo Tagout on gaariga. Dhicitaanka in la raaco tilmaamaha keeni kartaa in dhaawac shakhsi aad u daran ama dhimasho.
High-danab gacno gashi rabar dahaaran (fasalka 0 la sokeeye maqaar) waa in la gashanaadaa markuu ka shaqeeya kasta
fiilooyinka a high-voltage. The "xiritaanka High-danab Service iyo Power Up-Habka" ee bogga 4 waa in la hor raacay in ay ka saareen wax fiilooyinka a high-voltage. Dhicitaanka in la raaco tilmaamaha keeni kartaa in dhaawac shakhsi aad u daran ama dhimasho.
fiilooyinka High-danab iyo xarkaha waa orange iyo waxa ku jira qoran calaamadda digniinta ee Xidhiidhiyayaasha ah. qaybaha High-danab waxaa lagu calaamadeeyay leh calaamadda a. High-danab gacno gashi rabar dahaaran (fasalka 0 la sokeeye maqaar) waa in la isticmaalaa marka ka shaqeeya mid ka mid ah qaybaha kuwaas oo. Dhicitaanka in la raaco tilmaamaha keeni kartaa in dhaawac shakhsi aad u daran ama dhimasho.

Nidaamka High-danab xiritaanka Service

Xiritaanka Service High-danab iyo Habka Power Up-1. Raac "High-danab Work Area" nidaamka.
2. Hel ka Switch Service PEC cas on hore ee PEC iyo riixdo demiso.
3. Ka saar Cover Switch Service iyo rakibi qaybta ka joojinta (J48506).
4. tag giijin in qaybta ka joojinta.
5. Hubi in ay Switch Service PEC aan ka booska off dhaqaajin karin.
6. U ogolow nidaamka si ay u dejiyaan ugu yaraan 5 daqiiqo oo ay u guto danab sare.
7. Connect ServiceRanger iyo u arkaan Monitor Data PID 116 loo yaqaan "fili karo Battery High-danab." Isticmaalka SPN 520323 waayo xidhiidh J1939 "Battery danab RB" (Relay Box).
8. danab waa in uu noqdo 30 volts ama ka yar. Haddii danab ku xusan yahay 30 volts, uma shaqeeyaan on gaariga iyo xiriiri Eaton® ee 1-800-826-HELP (4357).
9. muhiim ah ka suuroggalaan Dami iyo sii wadi in lagu dhiso ama tallaabo dhib.
Note: danab ugu dhaco, si eber markii fure u off waa.

High-danab Service Power Up-Habka

1. Ku rakib dhan Xidhiidhiyayaasha a high-voltage galay ay qufulan.
2. Haddii aad tahay qof ka shaqeeya on gaariga, ka saar qaybta ka joojinta iyo tag.
3. Dib qaybta ka joojinta badan Switch Service.
4. Jiid Adeegga beddelo baxay oo ha set baabuurta 2 daqiiqo.
5. gaari bilow marka ay habboon tahay.

Eaton Qeybta Hybrid oo isku xira Location

Eaton Qeybta Hybrid iyo Goobaha isku xira MY08 Systems

Eaton Qeybta Hybrid oo isku xira Location MY09 Systems

Eaton Qeybta Hybrid iyo Goobaha isku xira MY09 Systems

STEP 1. Hubi xaaladda code qalad Active iyo Wax qabad la'aan iyo oofin korontada Pretest.

  1. Ceshano codes qalad Active iyo FMIs la ServiceRanger isticmaalaya Baarista 9-Jidka isku xira.
  2. Qabtaan Pretest korontada ku:
    • Haddii arrimaha laguma arag inta lagu guda jiro Pretest korontada ku, tag Tallaabada 2.
    • Haddii arrinta waxaa cusboonaysiiyey inta lagu guda jiro Pretest korontada ku, tag Tallaabada 3.

STEP 2. Hubi sii wareeggeedii TECU la habeeyo.

  1. Key off.
  2. Goostay cable batari negative.
  3. Goostay TECU la habeeyo 38-Jidka isku xira.
  4. Measure the resistance between the TECU Harness 38- Jidka isku xira Pin 2 iyo Pin 3:
    Note: Hubi in Waat / Ohm Meter waa on qiyaasta saxda ah (ku dhowaad 200 qiyaasta Ohm)

    • Haddii iska caabin ah oo u dhexeeya Pin 2 iyo Pin 3 waa inta u dhaxaysa 50-70 ohms, bedeli Unit Gudbinta Electronic Control ah (TECU), ka dibna tag Tallaabada 3.
    • Haddii iska caabin ah ka baxsan ee kala duwan, cusboonaysiiyo J1939 Data Link la habeeyo, ka dibna tag Tallaabada 3.

STEP 3. Hubi dayactirka.

  1. Key off.
  2. Dib isugu xir dhammaan xiriiriyeyaasha iyo xarkaha batteriga taban.
  3. Key on.
  4. codes Clear, arki Unu qabad la'aan Clear.
  5. Wado baabuur iyo isku dayaan in ay dib code ka.
  6. Hubi codes, arki View unu Active iyo Wax qabad la'aan.
    • Haddii codes ma, baaritaanka waa complete.
    • Haddii Code qalad 48 u muuqataa, heli qalad in imtixaanka, tag Tallaabada 1.
    • Haddii code kale oo aan ahayn 48 u muuqataa, arki Khalad List Code Index.

Qof kasta oo gudbinta qayb aad u baahan tahay aynu u leeyihiin! maalin isku mid ah maraakiibta la heli karo, dunida oo dhan.

U BAAHAN TAAGEERO FREE KA MID khubaro OUR?

WAC NOW
email US