Hybrid Eaton Fuller Gudbinta Babaca Code 107 – Danab High Battery Leak Ogaanshaha Babaca

Khalad code for Hybrid Eaton daydo Systems Drive (MY09) Cuneyso-8E406A-U / P, Cuneyso-8E406A-UP, Cuneyso-8E406A-UPG, Cuneyso-8E406A-CD, Cuneyso-8E406A-CDG, Cuneyso-8E406A-guud, Cuneyso-8E406A-T, Cuneyso-6E706B-CD, Cuneyso-6E706B-P iyo aad cuneyso-6E706B-UPG. Read hoose si aad u bartaan sida si ay u tijaabiso, nadiifiso iyo hagaajin qalad code qalad aad Freightliner, Mack, Peterbilt, Kenworth, Volvo, International, iyo gaari xamuul culus-waajib iyo qalabka. The Unit Control Battery (BCU) gudahood ah Carrier Power Electronics (PEC) si joogto ah dabagal ku baxsiga a high-voltage Hybrid la sheegay in circuit DC ee PEC ah.

khalad Code 107 – High danab Battery Leak Ogaanshaha Babaca Ogaanshaha

The shuruud soo socda waa in la buuxiyaa ka hor inta nidaamka ogaadaa gardarrada:

  • danab suuroggalaan Inverter waa ka weyn yahay 7 volts iyo ka yar 16 volts.
  • PEC danab suuroggalaan waa ka weyn yahay 7 volts iyo ka yar 16 volts.

Note: Marka dhib code ah Wax qabad la'aan tixraac ah Product Baarista Mode (PDM)

Xaaladaha in Calan Babaca Code Active

  • IMF 1 ayaa lagu wadaa markii iska caabin ah oo u dhexeeya fiilooyinka danab High iyo ka gaashaamida ka yar tahay 220K Ohms waayo, 5 seconds.
  • IMF 11, 30 ayaa lagu wadaa marka uu jiro signal ah ogaanshaha dillaac sax ahayn, waayo, 2 daqiiqo.

Uugu Marka Babaca Code 107 ayaa lagu wadaa shuruudaha soo socda dhici:

  • Amber "Check Hybrid" illuminates light.
  • Gaf waxa lagu kaydiyaa Control Module Hybrid (Gudiga sare) xusuusta.
  • Inverter xidho off nidaamka a high-voltage.
  • Gudiga sii si loo xakameeyo gaariga hybrid ah in hab naaftada kaliya.
  • la bixin kari Gudbinta bilaabi marsho in 1aad.

Xaaladaha in Calan Babaca Code qabad la'aan

Kaliya unu qabad la'aan la nadiifiyay karaa Unit Gudbinta Electronic Control ah (TECU) ama taariikhda HCM isticmaalaya ServiceRanger. TECU ayaa si toos ah oo ansixiyay unu ka dib markii taariikhda 200 saacadood iyo HCM si toos ah oo ansixiyay unu ka soo taariikhda ka dib qalad uu Wax qabad la'aan, waayo, 200 saacadood.

code qalad Tani waxaa keeni kara wax ka mid ah kuwan soo socda:

  • IMF 1, 11, 30
    • High-danab waxyeello cable ningax
    • High-danab wax yaabaha qayb
    • Biyaha ama qoyaan ee isku xira a high-voltage ama qayb.

khalad Code 107 – Danab High Battery Leak Ogaanshaha Babaca Test

Aqoonsiga Qeybta:

Semi truck diagram

FIIRO GAAR AH: U dir ka Eaton Qeybta Hybrid oo isku xira Location waayo, Goobaha isku xira in Systems MY09.

STEP 1. Hubi xaaladda code qalad Active ama qabad la'aan.

  1. Dib u eeg oo raaca digniinaha & ganaaxyada.
  2. Key on.
  3. Ceshano codes qalad Active iyo FMIs la ServiceRanger isticmaalaya Baarista 9-Jidka isku xira ama gacanta.
    • Haddii Babaca Code 107 waa Active, tag Tallaabada 2.
    • Haddii Babaca Code 107 waa Wax qabad la'aan, baaritaanka waa complete, tag Tallaabada 11.

STEP 2. Cabir iska caabin ah ee cable AC ah ineysan at inverter si motor ka / matoor.

  1. Ma baabuurka ku qalabeysan ah darran Power Generator (APG)? Ma code qalad u dhigay, halka baabuur-wadidda ama marka APG waa in la isticmaalo? Haddii ay Haa tahay call
    (800) 826-4357 oo raaca Dardar Hybrid gargaar.
    Danger: Eeg High-Voltage Service Shutdown and Power-Up Procedures. Raac habraaca si looga fogaado filaan ah, gubaan ama dhimasho ka khaldan u maareeyeen a high-voltage.
  2. Key off.
  3. Barkinta xira AC inverter ee inverter ah. The cable AC waa in aan la disconcerted ka Motor / Generator ah. Kormeer AC isku xira cable iyo AC inverter xiriir for qoyaanka ama wasakhda.
  4. Cabir iska caabin ah oo ka mid ah AC musmaarradii 3-waji: Note: The cable AC waa wali waa la xiran Motor / Generator ah.
    • Pin A si Cable Shield
    • Pin B si Cable Shield
    • Pin C inay Cable Shield
      • Haddii qoyaanka ama wasakhda la helay, tani waa a-Eaton aan failure. Eeg OEM for jihada dayactirka.
      • Haddii iska caabin ah waa OL ama kala duwan oo ka baxsan, tag Tallaabada 5.
      • Haddii iska caabin ah waa inta u dhaxaysa 0-220K ohms, tag Tallaabada 3.

STEP 3. Cabir iska caabin ah ee cable AC la ineysan ka Inverter iyo motor ka / matoor.

  1. Haddii aad halkan ka Step soo socda 2 xiritaanka danab sare waa in mar hore ayaa la sameeyaa oo fure u ah waa in booska "off". Haddii ay taasi la dhamaystiro sii wadaan # 2.
    Note: Haddii nidaamka xiritaanka danab sare ayaa loo sameeyaa laabtay bilowgii nidaamka this.
    Danger: Eeg High-Voltage Service Shutdown and Power-Up Procedures. Raac habraaca si looga fogaado filaan ah, gubaan ama dhimasho ka khaldan u maareeyeen a high-voltage.
  2. Barkinta xira AC ee Motor / Generator ah. The cable AC waa in hadda la jaro at Inverter iyo Motor ah / Generator. Kormeer AC isku xira cable iyo AC isku xira garoonka Generator Motor ee qoyaanka ama wasakhda.
    Note: Haddii qoyaanka ama wasakhda la helay, tani waa a-Eaton aan failure. Eeg OEM for jihada dayactirka.
  3. Cabir iska caabin ah ee AC Cable u dhexeeya musmaarradii soo socda:
    • Pin A si Cable Shield
    • Pin B si Cable Shield
    • Pin C inay Cable Shield
      • Haddii reading iska caabin ah waa "OL", remeasure cable AC dhinaca inverter ah.
      • Haddii caabiga mid ah AC pin isku xira in Cable Shield ee waa OL, tag Tallaabada 4.
      • Haddii wax iska caabin / joogtada waxaa laga helaa bedeli OEM bixisey AC Cable, tag Tallaabada 4.

STEP 4. Cabir iska caabin ah oo ah wajiga kasta Motor ah / Generator kiiska.

  1. Haddii aad halkan ka Step soo socda 3 habka xiritaanka danab sare waa in mar hore ayaa la sameeyaa oo muhiim ah ayaa dansan. Haddii ay taasi la dhamaystiro sii wadaan # 2.
    Danger: Eeg High-Voltage Service Shutdown and Power-Up Procedures. Raac habraaca si looga fogaado filaan ah, gubaan ama dhimasho ka khaldan u maareeyeen a high-voltage.
  2. Haddii aad halkan ka Step soo socda 1 danab sare AC Cable waa in la jaro ka inverter iyo Motor ah / Generator. Haddii tallaabooyinka 1 iyo 2 ayaa la dhameystiray sii wadaan # 3.
  3. Cabbirka saldhig 3-waji at Motor ah / Generator.
    • Godka A si Motor / kiiska Generator
    • Godka B si Motor / kiiska Generator
    • Godka C inay Motor / kiiska Generator
      • Haddii wax iska caabin ah ama sii waxaa laga helaa, bedeli Motor / Generator ah. Eeg saarista MY09 Motor / Generator iyo nidaamka Rakibaadda ee TRSM2000. Ka dib markii dayactir la sameeyey, tag Tallaabada 11.
      • Haddii iska caabin ah waa OL Motor ah / Generator ma aha shorted dhulka, tag Tallaabada 11.

STEP 5. Hubi daacadnimada ku Cable High danab DC.

  1. Haddii aad halkan ka Tallaabada B socda xiritaanka a danab sare waa in mar hore ayaa la sameeyaa oo muhiim ah ayaa dansan. Haddii ay taasi la dhamaystiro sii wadaan # 2. Haddii nidaamka danab sare xidhay hoos ayaa lagu sameeyaa noqo Tallaabada 1.
    Danger: Eeg High-Voltage Service Shutdown and Power-Up Procedures. Raac habraaca si looga fogaado filaan ah, gubaan ama dhimasho ka khaldan u maareeyeen a high-voltage.
  2. Barkinta xira DC ka PEC ah. The DC connector at the Inverter should not be disconnected. Kormeer DC cable isku xira oo isku xira DC at PEC ee qoyaanka ama wasakhda. Haddii qoyaanka ama wasakhda la helay, tani waa a-Eaton aan failure. Eeg OEM for jihada dayactirka. Haddii ay maya tahay qoyaan ama wasakhda la helay, sii soco ilaa # 3.
  3. Cabir iska caabin ah ee Cable DC inta u dhaxaysa Positive ah (+) si Cable Shield iyo taban (-) si Cable Shield.
    • Haddii iska caabin ah u furan yahay ama OL, tag Tallaabada 7.
    • Haddii iska caabin ah waa 0-220K Ohms, tag Tallaabada 6.

STEP 6. Hubi daacadnimada ku Cable High danab DC.

  1. Haddii aad halkan ka Step E socda xiritaanka a danab sare waa in mar hore ayaa la sameeyaa oo muhiim ah ayaa dansan. Haddii ay taasi la dhamaystiro sii wadaan in ay talaabo 2. Haddii nidaamka danab sare xidhay hoos ayaa lagu sameeyaa noqo Tallaabada 1.
    Danger: Eeg High-Voltage Service Shutdown and Power-Up Procedures. Raac habraaca si looga fogaado filaan ah, gubaan ama dhimasho ka khaldan u maareeyeen a high-voltage.
  2. Barkinta xira DC ka Inverter ah. The DC cable should be disconnected at the PEC and the Inverter. Kormeer DC cable isku xira oo isku xira DC at Inverter ee qoyaanka ama wasakhda.
    Note: Haddii qoyaanka ama wasakhda la helay, tani waa a-Eaton aan failure. Eeg OEM for jihada dayactirka.
  3. Cabir sare danab DC cable End to End.
    • positive (+) si wanaagsan (+)
    • xun (-) si xun (-)
    • positive (+) si gabo Ground
    • xun (-) si gabo Ground
      • Haddii iska caabin ah waa OL, tag Tallaabada 7.
      • Haddii caabiga wax kale oo aan ahayn OL badalo cable High danab DC. Ka dib markii dayactir la sameeyey, tag Tallaabada 11.

STEP 7. Hubi daacadnimada Inverter ah.

  1. Haddii aad halkan ka Step F socda xiritaanka danab sare waa in mar hore ayaa la sameeyaa oo muhiim ah ayaa dansan. Haddii ay taasi la dhamaystiro sii wadaan in ay talaabo 2. Haddii nidaamka xiritaanka danab sare ayaa loo sameeyaa noqo Tallaabada 1.
    Danger: Eeg High-Voltage Service Shutdown and Power-Up Procedures. Raac habraaca si looga fogaado filaan ah, gubaan ama dhimasho ka khaldan u maareeyeen a high-voltage.
  2. Cabir iska caabin ah gudahood Inverter wanaagsan in Case (Ground) on musmaarradii Inverter High danab dhinaca DC ee.
    • positive (+) si Inverter Case
    • xun (-) si Inverter Case
    • Haddii furan ama OL, tag Tallaabada 8.
    • Haddii iska caabin ah waa 0-220K Ohms, bedeli Inverter ah. Ka dib markii dayactir la sameeyey,
      tag Tallaabada 11.

STEP 7. Hubi daacadnimada Inverter ah.

  1. Haddii aad halkan ka Step soo socda 6 xiritaanka danab sare waa in mar hore ayaa la sameeyaa oo muhiim ah ayaa dansan. Haddii ay taasi la dhamaystiro sii wadaan # 2. Haddii nidaamka xiritaanka danab sare ayaa loo sameeyaa noqo Tallaabada 1.
    Danger: Eeg High-Voltage Service Shutdown and Power-Up Procedures. Raac habraaca si looga fogaado filaan ah, gubaan ama dhimasho ka khaldan u maareeyeen a high-voltage.
  2. Cabir iska caabin ah gudahood Inverter wanaagsan in Case (Ground) on musmaarradii Inverter High danab dhinaca DC ee.
    • positive (+) si Inverter Case
    • xun (-) si Inverter Case
    • Haddii furan ama OL, tag Tallaabada 8.
    • Haddii iska caabin ah waa 0-220K Ohms, bedeli Inverter ah. Ka dib markii dayactir la sameeyey,
      tag Tallaabada 11.

STEP 8. Hubi qaybaha.

  1. Haddii aad halkan ka Step soo socda 7 xiritaanka danab sare waa in mar hore ayaa la sameeyaa oo muhiim ah ayaa dansan. Haddii nidaamka xiritaanka danab sare ayaa loo sameeyaa noqo Tallaabada 1.
    Danger: Eeg High-Voltage Service Shutdown and Power-Up Procedures. Raac habraaca si looga fogaado filaan ah, gubaan ama dhimasho ka khaldan u maareeyeen a high-voltage.
  2. Hubi unit waxaa bixisey DC / DC Converter.DC / DC Converter for gudbinta Eaton Fuller
    • Haddii qalabaysan a Converter DC / DC, tag Tallaabada 9.
    • If no DC/DC Converter found see MY09 Power Electric Carrier (PEC) Removal and Installation procedure in TRSM2000 and perform repairs, ka dibna tag Tallaabada 11.

STEP 9. Hubi daacad ah u cable u dhexeeya PEC iyo / DC ee Converter DC High danab DC / DC.

  1. Haddii aad halkan ka H Step socda xiritaanka a danab Sare waa in horay loo soo qabtay iyo furaha ayaa loo demiyo. Haddii nidaamka xiritaanka danab sare ayaa loo sameeyaa noqo Tallaabada 1.
    Danger: Eeg High-Voltage Service Shutdown and Power-Up Procedures. Raac habraaca si looga fogaado filaan ah, gubaan ama dhimasho ka khaldan u maareeyeen a high-voltage.
  2. Barkinta High-danab DC / DC ee Cable ee PEC ah.
  3. Cabir iska caabin ah si ay dhulka ugu Cable DC ee isku xira labada boosteejada togan iyo kuwa taban ay ku gadaamaan:
    • positive (+) si Cable Shield
    • xun (-) si Cable Shield
    • Haddii wax iska caabin ah waa inta u dhaxaysa 0-220K Ohms, tag Tallaabada 10.
    • Haddii iska caabin ah waa OL, bedeli PEC ah, ka dibna tag Tallaabada 11.

STEP 10. Hubi daacadnimada ka cable u dhexeeya PEC iyo Converter DC / DC High danab DC / DC.

  1. Haddii aad halkan ka Step soo socda waxaan xiritaanka danab sare waa in mar hore ayaa la sameeyaa oo muhiim ah ayaa dansan. Haddii nidaamka xiritaanka danab sare ayaa loo sameeyaa noqo Tallaabada 1.
    Danger: Eeg High-Voltage Service Shutdown and Power-Up Procedures. Raac habraaca si looga fogaado filaan ah, gubaan ama dhimasho ka khaldan u maareeyeen a high-voltage.
  2. Barkinta High-danab DC / DC ee Cable ee Converter DC / DC. The High danab DC Cable waa in la jaro ka PEC iyo / DC ee Converter DC.
  3. Cabir iska caabin on Cable DC / DC.
    • positive (+) si wanaagsan (+)
    • xun (-) si xun (-)
    • positive (+) ay ku gadaamaan dhulka
    • xun (-) ay ku gadaamaan dhulka
  4. Cabir iska caabin at inverter ah
    • positive (+) in kiiska DC / DC
    • xun (-) in kiiska DC / DC
      • Haddii iska caabin ah waa OL, heli qalad in imtixaanka, tag Tallaabada 9.
  5. Haddii caabiga wax kale oo aan ahayn OL, bedeli Converter DC / DC, ka dibna tag Tallaabada 11.

STEP 11. Hubi dayactirka.

  1. Key on.
  2. codes Clear, arki Unu qabad la'aan Clear.
  3. Wado baabuur iyo isku dayaan in ay dib code ka.
  4. Hubi codes, arki View unu Active iyo Wax qabad la'aan.
    • Haddii codes ma, baaritaanka waa complete.
    • Haddii Code qalad 107 u muuqataa, heli qalad in imtixaanka, tag Tallaabada 1.
    • Haddii code kale oo aan ahayn 107 u muuqataa, arki Khalad List Code Index.

Qof kasta oo gudbinta qayb aad u baahan tahay aynu u leeyihiin! maalin isku mid ah maraakiibta la heli karo, dunida oo dhan.

U BAAHAN TAAGEERO FREE KA MID khubaro OUR?

WAC NOW
email US