Eaton Fuller Hybrid Gudbinta Front Box Test

Khalad code for Hybrid Eaton daydo Systems Drive (MY08) Cuneyso-8E306A-U, Cuneyso-8E306A-UPG, Cuneyso-8E306A-UP, Cuneyso-8E306A-CD, Cuneyso-8E306A-T, Cuneyso-6E606B-CD, (MY09) Cuneyso-8E406A-U / P, Cuneyso-8E406A-UP, Cuneyso-8E406A-UPG, Cuneyso-8E406A-CD, Cuneyso-8E406A-CDG, Cuneyso-8E406A-guud, Cuneyso-8E406A-T, Cuneyso-6E706B-CD, Cuneyso-6E706B-P iyo aad cuneyso-6E706B-UPG. Read hoose si aad u bartaan sida si ay u tijaabiso, nadiifiso iyo hagaajin qalad code qalad aad Freightliner, Mack, Peterbilt, Kenworth, Volvo, International, iyo gaari xamuul culus-waajib iyo imtixaanka calaamad-driven equipment.This waxaa la sameeyaa haddii dumisaan ah "-" ama qalabka biligleynaya waxaa soo bandhigay qaab marsho ah, mana jiraan codes Active ama qabad la'aan. muhiimka ah Daar iyo daawado qaab marsho ah. Haddii bandhigay marsho muujiso dumisaan ah "-" si joogto ah, Unit Gudbinta Electronic Control (TECU) aan awoodin in ay xaqiijiso gacanta Front Box. Haddii gudbinta soo bandhigayaa marsho Laydh iftiimaya marka hore ama dambe hab la doorto, gudbinta ma awoodo in ay galaan meel marsho ah.
Note: This symptom-based test should only be performed if directed here from the Diagnostic Procedure and there are no Active fault codes.

Front Box Test Ogaanshaha

The shuruud soo socda waa in la buuxiyaa ka hor inta nidaamka ogaadaa gardarrada:

  • Power kor ma kumbyuutarradeedu oo soo bandhigay qalabka muujinaysaa dumisaan ah "-".
    Gudbinta ma galaan marsho ka dhex-dhexaad ah (biligleynaya tirada marsho waa bandhigay marsho).

Fallback When Front Box Test is set the following conditions occur:

Ma jiro hab uugu waayo, calaamad this; si kastaba ha ahaatee, gaariga inuu sameeyo mid ka mid ah kuwan soo socda: ma kumbyuutarradeedu haddii dumisaan ah "-" Waa hadiyad ama ma galaan marsho haddii marsho birbirqaya joogo marka la marsho non-dhex-dhexaad la doorto.

Sababaha macquulka ah:

  • awood Low si Gear Select motor
  • Electric Shifter
  • Gear Select sensor
  • Harqood / Lidka / Main usheeda dhexe
  • Baddalo Bar Housing
  • waxayna jiidayeen Lidka
  • Xuddunta xirantay in Gear

Aqoonsiga Qeybta:

Shift Forks in neutral position.

Baddalo Forks meel dhex-dhexaad ah.

FIIRO GAAR AH: U dir ka Eaton Qeybta Hybrid oo isku xira Location waayo, Goobaha isku xira in Systems MY08

FIIRO GAAR AH: U dir ka Eaton Qeybta Hybrid oo isku xira Location waayo, Goobaha isku xira in Systems MY09.

STEP 1. Arag dhawrtaan bandhigay marsho ka dib markii ilaa xoog

  1. qabtaan oo keliya imtixaanka calaamad this haddii halkan ka HABKA Baarista diray mana jiraan codes qalad Active.
  2. Key on.
  3. Press "N" on Control ku Riix badhanka Shift.
  4. Waxaad dhawrtaa bandhigay marsho:
    • Haddii bandhigay marsho shows: "N", tag Tallaabada 2.
    • Haddii bandhigay marsho shows: "-", tag Tallaabada 3.

STEP 2. Arag dhawrtaan Display Gear marka gelinayn gudbinta galay Drive.

  1. jejebiyey adeegga Press iyo dooro D.
  2. Waxaad dhawrtaa Display Gear:
    • Haddii Display Gear ayaa muujinaya qalabka adag, baaritaanka waa complete.
    • Haddii bandhigay marsho muujinaysaa marsho biligleynaya la fallaadho lahayn, tag Tallaabada 3.

STEP 3. Arag dhawrtaan bandhigay marsho markii gelinayn gudbinta galay Drive.

  1. Key off.
  2. Attempt to remove any type of torque lock on the drivetrain through one of the following methods:
    • Ka saar driveshaft ah
    • Kor u giraangiraha drive ka off dhulka
    • Dabajooga gaariga ku dhex-dhexaad ah
  3. Key on.
  4. Waxaad dhawrtaa Display Gear:
    • Haddii bandhigay marsho muujinaysaa a "N" adag,2 tag Tallaabada 2.
    • Haddii bandhigay marsho uu wali muujinayaa dumisaan adag "-", tag Tallaabada 4.

STEP 4. Qabtaan korontada Pretest.

  1. Qabtaan Pretest korontada ku:
    • Haddii arrimaha laguma arag inta lagu guda jiro Pretest korontada ku, tag Tallaabada 5.
    • Haddii arrinta waxaa cusboonaysiiyey inta lagu guda jiro Pretest korontada ku, tag Tallaabada 1.

STEP 5. Hubi Electric Shifter qabata howlgal dhaqmaan a.

  1. Key on.
  2. Dhageyso buuq ka qalapka Electric Shifter / actuating ka dibna soo jeedin furaha off iyo maqli qaylada oo isku mar:
    • Haddii Shifter Electric ayaa laga maqli karo qalapka / actuating, tag Tallaabada 6.
    • Haddii Shifter Electric lama maqli karo qalapka, tag Tallaabada 6.

STEP 6. ka Shift ee Bar Housing saar Electric Shifter iyo kormeerto gudbinta farsamo.

  1. Key off.
  2. ka Shift Bar Housing saar Electric Shifter *.
  3. Kormeer soo socda:
    • Blocks Shift waxaa ku xidheen wareejin biraha si ammaan ah
    • qaylisiinaya Shift guurto meel kasta marsho
    • Electric Shifter waa ka xor wax dhicin faddarayn isxidho xad-dhaaf ah
    • Laba jagooyinka marsho in aan la ku hawlan karaa waqti isku mid ah
      • Haddii dhibaato ah ma helay, iyo actuation Electric Shifter lama maqlin in tallaabo hore, bedeli Unit Gudbinta Electronic Control ah (TECU), ka dibna tag Tallaabada 7.
      • Haddii dhibaato ah ma helay, iyo actuation Electric Shifter waxaa laga maqlay in tallaabo hore, bedeli Shifter Electric ah, ka dibna tag Tallaabada 7.
      • Haddii dhibaato la helay, dayactiro sida looga baahan yahay, ka dibna tag Tallaabada 7.

STEP 7. Hubi dayactirka.

  1. Key off.
  2. Xidhmaan oo dhan Xidhiidhiyayaasha.
  3. Key on.
    • Haddii bandhigay marsho bandhigayaa adag "N", baaritaanka waa complete.
    • Haddii uusan soo bandhigay qalabka muujiyaan adag "N", heli qalad in imtixaanka, tag Tallaabada 1.

Qof kasta oo gudbinta qayb aad u baahan tahay aynu u leeyihiin! maalin isku mid ah maraakiibta la heli karo, dunida oo dhan.

U BAAHAN TAAGEERO FREE KA MID khubaro OUR?

WAC NOW
email US