Hybrid Eaton Fuller Gudbinta Babaca Code 91 – Unit APG 1 CAN

Khalad code for Hybrid Eaton daydo Systems Drive (MY08) Cuneyso-8E306A-U, Cuneyso-8E306A-UPG, Cuneyso-8E306A-UP, Cuneyso-8E306A-CD, EH-8E306A-T and EH-6E606B-CD. Read hoose si aad u bartaan sida si ay u tijaabiso, nadiifiso iyo hagaajin qalad code qalad aad Freightliner, Mack, Peterbilt, Kenworth, Volvo, International, iyo gaari xamuul culus-waajib iyo qalabka. The darran Power Generator (APG) waa Inverter 5kW / 5kVA DC / AC in ku xiran danab sare baska DC ee nidaamka gaariga Eaton Hybrid korontada, wuxuuna abuuraa 60 -Hal waji 120V AC awood Hz ee codsiyada utility. Area Network maamusha The (CAN) waa-xawaaraha sare 500K labada ciyaaryahan qaloocin link xogta lahaansho ah oo isku xira HCM si Lidka Electric ah leewarka (ECA), Battery Control Module, Inverter iyo APG. link The ka mid ah waxaa ku jira 120 Ohm resistor dhamaadka kasta. link waxaa loo isticmaalaa in ay u gudbiyaan macluumaad gaar ah si ay u xajin hawlgallada jago ama awood korantada.

khalad Code 91 – Unit APG 1 ogaanshaha KARAA

The shuruud soo socda waa in la buuxiyaa ka hor inta nidaamka ogaadaa gardarrada:

  • Control Module Hybrid (Gudiga sare) danab suuroggalaan waa ka weyn yahay 7 volts iyo ka yar 16 volts.
  • Gudiga sare link xogta qalad (FC60) waa Wax qabad la'aan.

Note: Marka dhib code ah Wax qabad la'aan tixraac ah Product Baarista Mode (PDM)

Xaaladaha in Calan Babaca Code Active

  • IMF 9 ayaa lagu wadaa haddii xidhiidhka ka unit APG aan la helin, waayo, 7.5 seconds iyo waxa la filayaa in la helay oo ku salaysan goobaha qaabeynta: Nooca Vehicle = UPG iyo Number of Talada.

Uugu Marka Babaca Code 91 ayaa lagu wadaa shuruudaha soo socda dhici:

  • Amber "Check Hybrid" illuminates light.
  • Gaf waxa lagu kaydiyaa Control Module Hybrid (Gudiga sare) xusuusta.
  • If the fault sets at command on the APG remains off.
  • If the fault sets during operation the APG shuts off.

Xaaladaha in Calan Babaca Code qabad la'aan

Kaliya unu qabad la'aan la nadiifiyay karaa Unit Gudbinta Electronic Control ah (TECU) ama taariikhda HCM isticmaalaya ServiceRanger. TECU ayaa si toos ah oo ansixiyay unu ka dib markii taariikhda 200 saacadood iyo HCM si toos ah oo ansixiyay unu ka soo taariikhda ka dib qalad uu Wax qabad la'aan, waayo, 200 saacadood.

code qalad Tani waxaa keeni kara wax ka mid ah kuwan soo socda:

  • IMF 9
    • Xogta Link CAN dhow APG
    • APG

khalad Code 91 – Unit APG 1 CAN Test

Aqoonsiga Qeybta:

APG 8-jidka isku xira suunka low-danab

APG 8-Jidka Low-danab la habeeyo isku xira

gudbinta Fuller 9-jidka isku xira ogaanshaha

9-Jidka isku xira Baarista

FIIRO GAAR AH: U dir ka Eaton Qeybta Hybrid oo isku xira Location waayo, Goobaha isku xira in Systems MY08

digniinaha & ganaaxyada

Danger: Danger muujinaysaa aad la si xun u dhaawacmay doonaa ama la dilay haddii aadan raaci doonaa habraaca ku tilmaamay.
digniin: Digniin halis degdeg ah, taas oo keeni karta dhaawac shakhsi daran haddii aadan raaci doonaa habraaca ku tilmaamay.
digniin: Digniin muujinaysaa gaariga ama hantida dhaawac dhici kara haddii aadan raaci doonaa habraaca ku tilmaamay.

Note: Note muujinaysaa faahfaahin dheeraad ah u gargaartaan in cudurka ama dayactir ah component / Nidaamka.

Raac hannaanka ku qeexan amarka tilmaamay in ay ka fogaadaan dhaawac shakhsi ahaaneed:

1. Haddii loo yaqaano a high-voltage yihiin hareeraha baabuurka iyo ka joojinta la geliyo PEC ah, qofka kaliya ee la ogol yahay waa in ay u bilaabaan gaariga uu yahay qofka saxiixay tag joojinta.
2. Ka hor inta shaqeeya on gaari ama ka soo baxaya cab halka engine la socda, waa in aad meel lever wareeg ee "N" dhigay jejebiyey la dhigto, iyo xannibi giraangirihiina.
3. Sababo nabadgelyo, had iyo jeer ka qayb biriiga adeegga ka hor doorashada jagooyinka marsho ka "N."
4. Ka hor inta aadan bilaabin gaari had iyo jeer la fadhiya kursiga darawalka, dooro "N" on gacanta ku wareejin ah, oo qarka u saaran biriiga la dhigto.
5. In baabuurta la ePTO, engine iyo / ama
Motor / Generator bilaabi kartaa in hab ePTO. Marna qabtaan dayactirka ama shaqeeyaan gaadiidka, halka hab this.
6. 12-Waat Battery wanaagsan (+) iyo negative (-) waa in la hor ineysan si alxanka kasta oo gaari kasta Hybrid qalabaysan.

digniin: Raac hannaanka ku qeexan amarka tilmaamay in ay ka fogaadaan cillad qalabka ama dhaawac.
digniin: Ha sii daayo jejebiyey la dhigto ama isku dayaan in ay doortaan marsho ilaa cadaadiska hawada waa heerka saxda ah.
digniin: Si looga fogaado waxyeelo ay ku gudbinta lagu jiro jiidaya meesha lever wareeg ee "N" oo kor u giraangiraha drive ka off dhulka ama barkinta driveline ah.

Digniinaha High-danab & ganaaxyada

  • Isticmaal CO2 ama qallalan Chemical Dab bakhtiiyeyaasha.
  • The taararka a high-voltage waxaa daboolay ningax orange ama tubbada convoluted iyo sumadaha digniin at Xidhiidhiyayaasha ku calaamadsan.
  • All Hybrid Eaton® Diesel / baabuurta Electric waxaa la qorayaa 'Hybrid’ dibaddeeda oo gaariga, oo ay la socdaan calaamad wareejin on dumisaan ah.
  • U dir ka OEM meel gaarka ah ee jiifku Jaha qaybaha hybrid.
  • HA jarjar ah fiilooyinka a high-voltage orange.
  • HA jarjar ama furo PEC ah.
  • HA jarjar ama furo Converter DC / DC.
  • HA jarjar ama furo Inverter ah.

aag-dhuleed A waa in kor loo dhigay iyo high-voltage dahaaran gacno gashi rabar (fasalka 0 la sokeeye maqaar) waxaa loo baahan yahay ka hor inta aan la shaqeeyo on a high-voltage. Dhicitaanka in la raaco tilmaamaha keeni kartaa in dhaawac shakhsi aad u daran ama dhimasho.
gacmo gashi The caag-dahaaran tahay in la xirto, halka ka shaqeeya nidaamka a high-voltage yihiin fasalka 0 la sokeeye maqaar. gacno gashi rabar ah waa in la baaro inta aan la isticmaalin KASTA socda nidaamka caag imtixaanka gashi ningax laga helay "Tools Baarista / Publications Service" ee bogga 6. Dhicitaanka in la raaco tilmaamaha keeni kartaa in dhaawac shakhsi aad u daran ama dhimasho.
Ka hor baarista ama ka shaqeeya fiilooyin a high-voltage ama qaybaha "Habka Adeegga xiritaanka High-danab iyo Power Up-" ee bogga 4 Waa in la raaco. Dhicitaanka in la raaco tilmaamaha keeni kartaa in dhaawac shakhsi aad u daran ama dhimasho.
The qalabka Shaqoxannibista iyo Tagout waa saaro kaliya farsamo yaqaan ah in kaalinta qalabka Shaqoxannibista iyo Tagout on gaariga. Dhicitaanka in la raaco tilmaamaha keeni kartaa in dhaawac shakhsi aad u daran ama dhimasho.
High-danab gacno gashi rabar dahaaran (fasalka 0 la sokeeye maqaar) waa in la gashanaadaa markuu ka shaqeeya kasta
fiilooyinka a high-voltage. The "xiritaanka High-danab Service iyo Power Up-Habka" ee bogga 4 waa in la hor raacay in ay ka saareen wax fiilooyinka a high-voltage. Dhicitaanka in la raaco tilmaamaha keeni kartaa in dhaawac shakhsi aad u daran ama dhimasho.
fiilooyinka High-danab iyo xarkaha waa orange iyo waxa ku jira qoran calaamadda digniinta ee Xidhiidhiyayaasha ah. qaybaha High-danab waxaa lagu calaamadeeyay leh calaamadda a. High-danab gacno gashi rabar dahaaran (fasalka 0 la sokeeye maqaar) waa in la isticmaalaa marka ka shaqeeya mid ka mid ah qaybaha kuwaas oo. Dhicitaanka in la raaco tilmaamaha keeni kartaa in dhaawac shakhsi aad u daran ama dhimasho.

Nidaamka High-danab xiritaanka Service

Xiritaanka Service High-danab iyo Habka Power Up-1. Raac "High-danab Work Area" nidaamka.
2. Hel ka Switch Service PEC cas on hore ee PEC iyo riixdo demiso.
3. Ka saar Cover Switch Service iyo rakibi qaybta ka joojinta (J48506).
4. tag giijin in qaybta ka joojinta.
5. Hubi in ay Switch Service PEC aan ka booska off dhaqaajin karin.
6. U ogolow nidaamka si ay u dejiyaan ugu yaraan 5 daqiiqo oo ay u guto danab sare.
7. Connect ServiceRanger iyo u arkaan Monitor Data PID 116 loo yaqaan "fili karo Battery High-danab." Isticmaalka SPN 520323 waayo xidhiidh J1939 "Battery danab RB" (Relay Box).
8. danab waa in uu noqdo 30 volts ama ka yar. Haddii danab ku xusan yahay 30 volts, uma shaqeeyaan on gaariga iyo xiriiri Eaton® ee 1-800-826-HELP (4357).
9. muhiim ah ka suuroggalaan Dami iyo sii wadi in lagu dhiso ama tallaabo dhib.
Note: danab ugu dhaco, si eber markii fure u off waa.

High-danab Service Power Up-Habka

1. Ku rakib dhan Xidhiidhiyayaasha a high-voltage galay ay qufulan.
2. Haddii aad tahay qof ka shaqeeya on gaariga, ka saar qaybta ka joojinta iyo tag.
3. Dib qaybta ka joojinta badan Switch Service.
4. Jiid Adeegga beddelo baxay oo ha set baabuurta 2 daqiiqo.
5. gaari bilow marka ay habboon tahay.

Eaton Qeybta Hybrid oo isku xira Location

Eaton Qeybta Hybrid iyo Goobaha isku xira MY08 Systems

Eaton Qeybta Hybrid oo isku xira Location MY09 Systems

Eaton Qeybta Hybrid iyo Goobaha isku xira MY09 Systems

STEP 1. Hubi xaaladda code qalad Active iyo Wax qabad la'aan iyo hadiyad FMIs.

  1. Dib u eeg oo raaca digniinaha & ganaaxyada.
  2. Ceshano codes qalad Active iyo FMIs la ServiceRanger isticmaalaya Baarista 9-Jidka isku xira ama gacanta.
  3. Key off.
    digniin: Eeg High-Voltage Service Shutdown and Power-Up Procedures. Raac habraaca si looga fogaado filaan ah, gubaan ama dhimasho ka khaldan u maareeyeen a high-voltage.
  4. Waa kuwee FMIs joogaan?
    • Haddii FMI9 waa go Active Tallaabada 2.

STEP 2. Hubi iska caabin on APG Fardoleydoy KARAA.

  1. Cabir iska caabin ah u dhexeeya soo socda:
    • Baarista 9-Jidka isku xira musmaarradii H iyo J
    • 2-Jidka isku xira Data Link musmaarradii 1 iyo 2
    • 3-Jidka isku xira Data Link musmaarradii A iyo B
      Note: The 3-Way and 2-Way Data Link Connectors are located next to the 9-Way Diagnostic Connector.
      Note: Make sure the Volt/Ohm meter is on the proper scale (ku dhowaad 200 qiyaasta Ohm).

      • Haddii iska caabin ah u dhexeeya Pin H iyo J Pin, Pin A iyo B Pin, ama Pin 1 iyo Pin 2 waa inta u dhaxaysa 50-70 ohms, tag Tallaabada 3.
      • Haddii iska caabin ah waa ka roon yahay 70 ohms, mid ama ka badan resistors gabagabaynta on Link Data CAN ee la habeeyo waa mid ka maqan ama ka duwan, ama waxaa jira furan in link. Dayactir ka OEM CAN Data Link la habeeyo, ka dibna tag Tallaabada 4.
      • Haddii iska caabin ah uu ka yar yahay 50 ohms, waxaa jira joogo resistor gabagabaynta dheeraad ah. Dayactir ka OEM CAN Data Link la habeeyo, ka dibna tag Tallaabada 4.

STEP 3. Hubi iska caabin on APG Fardoleydoy KARAA.

  1. Key off.
  2. Barkinta cable ka batari negative.
  3. Barkinta ee isku xira APG 8-Jidka at APG.
  4. Cabir iska caabin ah u dhexeeya APG 8-Jidka isku xira Pin 4 iyo Pin 5:
    Note: Hubi in Waat / Ohm Meter waa on qiyaasta saxda ah (ku dhowaad 200 qiyaasta Ohm).

    • Haddii iska caabin ah u dhexeeya Pin 4 iyo Pin 5 waa inta u dhaxaysa 110-130 ohms, bedeli Power darran haddii ay Generator (APG) Inverter, ka dibna tag Tallaabada 4.
    • Haddii caabiga ka baxsan kala duwan ee, dhiso CAN Data Link la habeeyo, ka dibna tag Tallaabada 4.

STEP 4. Hubi dayactirka.

  1. Key off.
  2. Xidhmaan oo dhan Xidhiidhiyayaasha
    digniin: Eeg High-Voltage Service Shutdown and Power-Up Procedures. Raac habraaca si looga fogaado filaan ah, gubaan ama dhimasho ka khaldan u maareeyeen a high-voltage
  3. Key on.
  4. Shaqeeyaan APG iyo isku dayaan in ay dib code ka.
  5. Hubi codes, arki View unu Active iyo Wax qabad la'aan.
    • Haddii codes ma, baaritaanka waa complete.
    • Haddii Code qalad 91 u muuqataa, heli qalad in imtixaanka, tag Tallaabada 1.
    • Haddii code kale oo aan ahayn 91 u muuqataa, arki Khalad List Code Index.

Qof kasta oo gudbinta qayb aad u baahan tahay aynu u leeyihiin! maalin isku mid ah maraakiibta la heli karo, dunida oo dhan.

U BAAHAN TAAGEERO FREE KA MID khubaro OUR?

WAC NOW
email US