Hybrid Eaton Fuller Gudbinta Babaca Code 88 – Inverter KARAA Message (Gudiga sare)

Khalad code for Hybrid Eaton daydo Systems Drive (MY09) Cuneyso-8E406A-U / P, Cuneyso-8E406A-UP, Cuneyso-8E406A-UPG, Cuneyso-8E406A-CD, Cuneyso-8E406A-CDG, Cuneyso-8E406A-guud, Cuneyso-8E406A-T, Cuneyso-6E706B-CD, Cuneyso-6E706B-P iyo aad cuneyso-6E706B-UPG. Read hoose si aad u bartaan sida si ay u tijaabiso, nadiifiso iyo hagaajin qalad code qalad aad Freightliner, Mack, Peterbilt, Kenworth, Volvo, International, iyo gaari xamuul culus-waajib iyo qalabka. Inverter wuxuu la xidhiidhaa Unit Control Battery ah (BCU) oo ku yaalla Power Electronics Carrier ah (PEC) iyo Control Module ku Hybrid (Gudiga sare) on Network Area maamusha (CAN) -Xawaaraha sare link xogta lahaansho. link xogta waa labada ciyaaryahan laba silig a qaloocdo leh laba 120 Ohm resistors ku yaalla link. khalad Code 88 will only be set with Hybrid Control Module (Gudiga sare) heerka software 663 iyo hoose. HCM software 671 oo weyn ka taagi doonaa code Gaf 111 for the inverter CAN message fault.

khalad Code 88 – Inverter CAN Message Babaca Ogaanshaha

The shuruud soo socda waa in la buuxiyaa ka hor inta nidaamka ogaadaa gardarrada:

  • Gudiga sare danab suuroggalaan waa ka weyn yahay 7 volts iyo ka yar 16 volts.
  • Gaf HCM link xogta CAN waa qabad la'aan.

Note: Marka dhib code ah Wax qabad la'aan tixraac ah Product Baarista Mode (PDM)

Xaaladaha in Calan Babaca Code Active

  • IMF 9 ayaa lagu wadaa markii Gudiga ayaa helay fariin Inverter ah 30 wareegyada fariin isku xiga.
  • IMF 2 is only Active in Product Diagnostic Mode (PDM) iyo nooc haddii 3 farriimo isku xigta Inverter aan la helin HCM.

Uugu Marka Babaca Code 88 ayaa lagu wadaa shuruudaha soo socda dhici:

  • Amber "Check Hybrid" illuminates light.
  • Gaf waxa lagu kaydiyaa Control Module Hybrid (Gudiga sare) xusuusta.
  • Electric Motor / Generator la taageero iyo noolaynta naafada ah; si kastaba ha ahaatee, ee Relays a high-voltage sii powered.
  • Gudiga sii si loo xakameeyo gaariga hybrid ah in hab naaftada kaliya.
  • la bixin kari Gudbinta bilaabi marsho in 1aad.

Xaaladaha in Calan Babaca Code qabad la'aan

Kaliya unu qabad la'aan la nadiifiyay karaa Unit Gudbinta Electronic Control ah (TECU) ama taariikhda HCM isticmaalaya ServiceRanger. TECU ayaa si toos ah oo ansixiyay unu ka dib markii taariikhda 200 saacadood iyo HCM si toos ah oo ansixiyay unu ka soo taariikhda ka dib qalad uu Wax qabad la'aan, waayo, 200 saacadood.

code qalad Tani waxaa keeni kara wax ka mid ah kuwan soo socda:

  • IMF 9, 2
    • Inverter
    • Xogta Link CAN

khalad Code 88 – Inverter Message Babaca Test CAN

Qeybta Aqoonsiga MY09 Systems:

HCM - Hybrid System Interface Connector

La habeeyo Front View
(Gudiga sare – Hybrid System Wajahadda isku xira)

Duetsch 40-way mating connector view

Duetsch 40-jidka isku xira view weheshiga

FIIRO GAAR AH: U dir ka Eaton Qeybta Hybrid oo isku xira Location waayo, Goobaha isku xira in Systems MY09.

HCM inverter connector location

STEP 1. Hubi xaaladda code Active ama qabad la'aan iyo oofin korontada Pretest.

  1. Ceshano codes qalad Active iyo FMIs la ServiceRanger isticmaalaya Baarista 9-Jidka isku xira ama gacanta.
  2. Qabtaan Pretest korontada iyo Hybrid korontada Pretest.
    • Haddii ay maya tahay arrimaha waxaa la helay intii lagu korontada ee Pretest Hybrid, tag Tallaabada 2.
    • Haddii arrinta waxaa cusboonaysiiyey inta lagu guda jiro korontada ee Pretest Hybrid, tag Tallaabada 8.

STEP 2. Hubi sii wareeggeedii inverter.

  1. Key off.
  2. Goostay Inverter 40-Jidka isku xira.
  3. Cabir iska caabin ah oo u dhexeeya Inverter 40-Jidka isku xira Pin 5 iyo Pin 4.40 Jidka isku xira inverter
    • Haddii iska caabin ah waa OL ama ka baxsan 50-70 ohms, cusboonaysiiyo OEM link KARAA suunka. tag Tallaabada 8.
    • Haddii iska caabin ah waa inta u dhaxaysa 50-70 ohms, tag Tallaabada 3.

STEP 3. Hubi circuit CAN soo gaabiyo dhulka.

  1. Cabir CAN dhulka iska caabin ah oo ku saabsan isku xira Inverter OEM:
    • pin 1 si Inverter kiiska
    • pin 2 si Inverter kiiska
      • Haddii mid iska caabin ah waa 0-100 ohms, dayactirka shorted link KARAA circuit. tag Tallaabada 8.
      • Haddii labada resistances waa 7k ohms, tag Tallaabada 4.

STEP 4. Hubi CAN waxaa ku nool in PIN isku xira saxda ah.

  1. Cabir iska caabin ah oo u dhexeeya Inverter 40-Jidka Pin 4 iyo cagtaadu 9-Jidka isku xira Cilad Pin H. (Haddii Pin H ma aha dadku, heli 3-Jidka isku xira dhow
    9- Jidka ama ka bixida Pin resistor 1 dhow 9-Jidka.)

    • Haddii iska caabin ah waa 0-0.3 ohms, tag Tallaabada 5.
    • Haddii iska caabin ah waa 60 ohms, dayactir koronto KARAA (hi oo ku yar yihiin khalad banki). tag Tallaabada 8.

STEP 5. Hubi xoog iyo dhulka inay inverter.

  1. Key on, la Inverter 40-Jidka weli ineysan.
  2. danab qiyaas 40-Jidka isku xira:
    • pin 1 in Pin 640 Jidka isku xira Pin inverter 1 in Pin 6
  3. 3. danab qiyaas 40-Jidka isku xira:
    • pin 2 in Pin 740 Jidka isku xira Pin inverter 1 in Pin 6
      • Haddii iska caabin ah waa 0-0.3 ohms, bedeli HCM. tag Tallaabada 8.
      • Haddii iska caabin ah waa OL ama ka weyn tahay 0.3 ohms, cusboonaysiiyo suunka OEM u dhexeeya Gudiga sare iyo Inverter. tag Tallaabada 8.

STEP 6. Hubi circuit dhulka si inverter.

  1. Cabir iska caabin ah oo u dhexeeya Inverter 40-Jidka isku xira Pin 6 iyo dhulka ama Inverter 40-Jidka isku xira Pin 7 iyo dhulka.40 Jidka isku xira Pin inverter 1 in Pin 6
    • Haddii iska caabin ah waa 0-0.3 ohms, tag Tallaabada 7.
    • Haddii iska caabin ah waa ka sii badan 0.3 ohms, cusboonaysiiyo OEM circuit dhulka si Inverter. tag Tallaabada 8.

STEP 7. Cabir iska caabin ah oo u dhexeeya Gudiga sare iyo inverter ah.

  1. Key off.
  2. Ka saar 38-Jidka Hybrid Vehicle Wajahadda isku xira.
  3. Cabir iska caabin ah oo ku saabsan 38-Jidka Vehicle Hybrid Wajahadda isku xira (S2) pin 2 to Inverter 40-Way Pin 1. 38-Way Vehicle Hybrid Wajahadda isku xira in Inverter 40-Jidka Pin 1
    • Haddii iska caabin ah waa 0-0.3 ohms, bedeli HCM. tag Tallaabada 8.
    • Haddii iska caabin ah waa OL ama ka weyn tahay 0.3 ohms, cusboonaysiiyo suunka OEM u dhexeeya Gudiga sare iyo Inverter. tag Tallaabada 8.

STEP 8. Hubi dayactirka.

  1. Key off.
  2. Xidhmaan oo dhan Xidhiidhiyayaasha.
  3. Key on.
  4. codes Clear, arki Unu qabad la'aan Clear.
  5. Wado baabuur iyo isku dayaan in ay dib code ka.
  6. Hubi codes, arki View unu Active iyo Wax qabad la'aan.
    • Haddii codes ma, baaritaanka waa complete.
    • Haddii Code qalad 88 u muuqataa, heli qalad in imtixaanka, tag Tallaabada 1.
    • Haddii code kale oo aan ahayn 88 u muuqataa, arki Khalad List Code Index.

Qof kasta oo gudbinta qayb aad u baahan tahay aynu u leeyihiin! maalin isku mid ah maraakiibta la heli karo, dunida oo dhan.

U BAAHAN TAAGEERO FREE KA MID khubaro OUR?

WAC NOW
email US