Hybrid Eaton Fuller Gudbinta Babaca Code 68 – Fasalka sensor Babaca

Khalad code for Hybrid Eaton daydo Systems Drive (MY08) Cuneyso-8E306A-U, Cuneyso-8E306A-UPG, Cuneyso-8E306A-UP, Cuneyso-8E306A-CD, Cuneyso-8E306A-T, Cuneyso-6E606B-CD, (MY09) Cuneyso-8E406A-U / P, Cuneyso-8E406A-UP, Cuneyso-8E406A-UPG, Cuneyso-8E406A-CD, Cuneyso-8E406A-CDG, Cuneyso-8E406A-guud, Cuneyso-8E406A-T, Cuneyso-6E706B-CD, Cuneyso-6E706B-P iyo aad cuneyso-6E706B-UPG. Read hoose si aad u bartaan sida si ay u tijaabiso, nadiifiso iyo hagaajin qalad code qalad aad Freightliner, Mack, Peterbilt, Kenworth, Volvo, International, iyo gaari xamuul culus-waajib iyo qalabka. Sensor Fasalka waa qayb ka mid ah gudaha Control Module ku Hybrid (Gudiga sare). Waxaa xisaabinaya fasalka gaari loo baahan yahay Start Hill ku Caawin (HSA) feature si fiican u shaqeyo. HSA gaaban heysta Biriigyada Service ee bilaabay in ay oggolaadaan in hawlgalka baydalka-hal lug ah aan gaariga dib u diidanaa.

khalad Code 68 – Fasalka sensor Babaca Ogaanshaha

The shuruud soo socda waa in la buuxiyaa ka hor inta nidaamka ogaadaa gardarrada:

  • Control Module Hybrid (Gudiga sare) danab suuroggalaan waa ka weyn yahay 7 volts iyo ka yar 16 volts.

Note: Marka dhib code ah Wax qabad la'aan tixraac ah Product Baarista Mode (PDM)

Xaaladaha in Calan Babaca Code Active

  • IMF 12 ayaa lagu wadaa markii shidma fasalka ma aha firfircoon ama la joogo iyo HSA waa karti u qaabeynta HCM.
  • IMF 13 is set when HSA is enabled in the HCM configuration but the grade sensor has not been calibrated.
  • IMF 14 ayaa lagu wadaa markii Gudiga sare ah ku qalabeysan yahay sensor Fasalka a, HSA waa karti iyo signal ka shidma waa out of kala duwan.

Uugu Marka Babaca Code 68 ayaa lagu wadaa shuruudaha soo socda dhici:

  • Amber "Check Hybrid" illuminates light.
  • Gaf waxa lagu kaydiyaa Control Module Hybrid (Gudiga sare) xusuusta.

code qalad Tani waxaa keeni kara wax ka mid ah kuwan soo socda:

  • IMF 12
    • qaabeynta HCM aan sax ahayn
    • Gudiga sare
  • IMF 13
    • Fasalka sensor dhaqmaan
    • qaabeynta HCM aan sax ahayn
  • IMF 14
    • Gudiga sare
    • Gudiga sare khaldan sii kordhaya in gudbinta

khalad Code 68 – Fasalka sensor Babaca Test

Aqoonsiga Qeybta:

Hybrid Control Module for Eaton Fuller transmission

1. Control Module Hybrid (Gudiga sare)
2. Nut (3)
3. 38-System Jidka isku xira koronto-in
4. 38-Jidka isku xira Vehicle koronto-in
5. sii kordhaya Plate

FIIRO GAAR AH: U dir ka Eaton Qeybta Hybrid oo isku xira Location waayo, Goobaha isku xira.

STEP 1. Hubi joogo FMIs.

  1. Key on.
  2. Ceshano codes qalad Active iyo FMIs la ServiceRanger isticmaalaya Baarista 9-Jidka isku xira ama gacanta.
    • Haddii FMI 12 waa firfircoon, tag Tallaabada 2.
    • Haddii FMI 13 waa firfircoon, tag Tallaabada 3.
    • Haddii FMI 14 waa firfircoon, tagaan in aan xoojinno 4.

STEP 2. Hubi qaabeynta HCM.

  1. Key on.
  2. Isticmaalka ServiceRanger aragto qaabeynta HCM.
    • Haddii HSA qaabeynta lagu wadaa at "HSA karti" iyo feature HSA looma baahna, dooro "No HSA" sanduuqa dropdown ah. Save isbedel qaabeynta this by xulashada download, ka dibna tag Tallaabada 5.
    • Haddii HSA qaabeynta lagu wadaa at "HSA karti" iyo waxaa loo baahan yahay feature HSA, Gudiga sare waa in loo badalaa version hardware 3.7 ama ka sareeya oo ay ku jiraan Fasalka ah sensor gudaha. La xiriir Eaton for HCM sax macluumaadka tirada qayb.

STEP 3. Hubi Fasalka sensor waxaa dhexdiisa.

  1. Key on.
  2. Isticmaalka ServiceRanger, iiraacshay sensor Fasalka by xulashada "Advanced Product" ka menu ugu weyn.
  3. Dooro "Control Module Hybrid."
  4. Dooro "Grade sensor dhaqmaan" oo raac tilmaamaha ku-screen:
    • Haddii FMI 13 ma aha firfircoon ka dib markii qalapka, dhaqmaan dhameystiran, tag Tallaabada 5.
    • Haddii FMI 13 waa Active ka dib markii qalapka, la xiriir Eaton ee 1-800-826-HELP (4357).

STEP 4. Hubi HCM si fiican Jaha.

  1. Key on.
  2. Ensure the HCM is properly mounted to the transmission.
    • Haddii HCM si fiican ma Jaha ama boolal cap waa dabacsan, adkayn HCM boolal kordhaya cap, ka dibna tag Tallaabada 5.
    • Haddii HCM si fiican dhajinta in gudbinta, bedeli HCM. Eeg Control Module ku Hybrid (Gudiga sare) Ka saarida iyo nidaamka Rakibaadda ee TRSM2000, ka dibna tag in aan xoojinno 5.

STEP 5. Hubi dayactirka.

  1. Key off.
  2. Xidhmaan oo dhan Xidhiidhiyayaasha iyo cable ka batari negative.
  3. Key on.
  4. codes Clear, arki Unu qabad la'aan Clear.
  5. Wado baabuur iyo isku dayaan in ay dib code ka.
  6. Hubi codes, arki View unu Active iyo Wax qabad la'aan.
    • Haddii codes ma, baaritaanka waa complete.
    • Haddii Code qalad 68 u muuqataa, heli qalad in imtixaanka, tag Tallaabada 1.
    • Haddii code kale oo aan ahayn 68 u muuqataa, arki Khalad List Code Index.

Qof kasta oo gudbinta qayb aad u baahan tahay aynu u leeyihiin! maalin isku mid ah maraakiibta la heli karo, dunida oo dhan.

U BAAHAN TAAGEERO FREE KA MID khubaro OUR?

WAC NOW
email US