Hybrid Eaton Fuller Gudbinta Babaca Code 67 – ECA Kicinta danab

Khalad code for Hybrid Eaton daydo Systems Drive (MY08) Cuneyso-8E306A-U, Cuneyso-8E306A-UPG, Cuneyso-8E306A-UP, Cuneyso-8E306A-CD, Cuneyso-8E306A-T, Cuneyso-6E606B-CD, (MY09) Cuneyso-8E406A-U / P, Cuneyso-8E406A-UP, Cuneyso-8E406A-UPG, Cuneyso-8E406A-CD, Cuneyso-8E406A-CDG, Cuneyso-8E406A-guud, Cuneyso-8E406A-T, Cuneyso-6E706B-CD, Cuneyso-6E706B-P iyo aad cuneyso-6E706B-UPG. Read hoose si aad u bartaan sida si ay u tijaabiso, nadiifiso iyo hagaajin qalad code qalad aad Freightliner, Mack, Peterbilt, Kenworth, Volvo, International, iyo gaari xamuul culus-waajib iyo qalabka. The Electric Lidka leewarka (ECA) gacanta ku booska shirka xajin. ECA waxay leedahay isku xira 8-Jidka siisa awood suuroggalaan in ECA ka Control Module ku Hybrid (Gudiga sare).

khalad Code 67 – ECA Kicinta danab Ogaanshaha

The shuruud soo socda waa in la buuxiyaa ka hor inta nidaamka ogaadaa gardarrada:

  • Control Module Hybrid (Gudiga sare) danab suuroggalaan waa ka weyn yahay 7 volts iyo ka yar 16 volts.

Note: Marka dhib code ah Wax qabad la'aan tixraac ah Product Baarista Mode (PDM)

Xaaladaha in Calan Babaca Code Active

  • IMF 3 ayaa lagu wadaa markii danab ku suuroggalaan ECA waxaa shorted nidaamka 12-volt ah oo la ogaado iyada oo loo marayo Gudiga ka hor laadyo sahayda suuroggalaan ee ECA ah.
  • IMF 4 ayaa lagu wadaa markii danab ku suuroggalaan ECA waxaa shorted in dhulka lagu jiro muhiim ah oo ku saabsan hawlgalka oo la ogaado by HCM.
  • IMF 5 ayaa lagu wadaa markii danab ku suuroggalaan ECA waa wareeg furan ka dib fure u ah oo ku saabsan yahay.

Uugu Marka Babaca Code 67 ayaa lagu wadaa shuruudaha soo socda dhici:

  • Red "Stop Hybrid" illuminates light.
    Gaf waxa lagu kaydiyaa xasuusta HCM.
  • Haddii qalad ku dhacaa halka baabuur-wadidda, ECA ka mid haysaa meel xajin hadda ama guuro meel la soo dhaafay amray by HCM, ka dibna qalab ECA haysta galaan doonaa.
  • Haddii qalad ku dhacdaa ilaa xoog, gaariga aan kumbyuutarradeedu doonaa.

Xaaladaha in Calan Babaca Code qabad la'aan

Kaliya unu qabad la'aan la nadiifiyay karaa Unit Gudbinta Electronic Control ah (TECU) ama taariikhda HCM isticmaalaya ServiceRanger. TECU ayaa si toos ah oo ansixiyay unu ka dib markii taariikhda 200 saacadood iyo HCM si toos ah oo ansixiyay unu ka soo taariikhda ka dib qalad uu Wax qabad la'aan, waayo, 200 saacadood.

code qalad Tani waxaa keeni kara wax ka mid ah kuwan soo socda:

  • IMF 3, 4, 5
    • ECA Kicinta Supply la habeeyo ka HCM
    • Gudiga sare
    • ECA

khalad Code 67 – ECA Ignition Voltage Test

System Qeybta Aqoonsiga MY09:

HCM - Hybrid System Interface Connector

La habeeyo Front View
(Gudiga sare – Hybrid System Wajahadda isku xira)

ECA 8-way connector

ECA 8-Jidka isku xira

FIIRO GAAR AH: U dir ka Eaton Qeybta Hybrid oo isku xira Location waayo, Goobaha isku xira in Systems MY08

FIIRO GAAR AH: U dir ka Eaton Qeybta Hybrid oo isku xira Location waayo, Goobaha isku xira in Systems MY09.

HCM ECA Ground connector location Eaton Fuller transmission

STEP 1.Verify FMIs joogo.

  1. Ceshano codes qalad Active iyo FMIs la ServiceRanger isticmaalaya Baarista 9-Jidka isku xira ama gacanta.
  2. Key off.
  3. Waa kuwee FMIs joogaan?
    • Haddii FMI 3 waxaa ku qoran, tag Tallaabada 2.
    • Haddii FMI 4 waxaa ku qoran, tag Tallaabada 3.
    • Haddii FMI 5 waxaa ku qoran, tagaan in aan xoojinno 5.

STEP 2. Hubi danab ee ECA la habeeyo iyo dhulka.

  1. Key off.
  2. Barkinta ECA 8-Jidka isku xira.
  3. Measure voltage on the ECA 8-Way Connector from Pin H to ground:
    • Haddii danab ka yar tahay 0 volts, bedeli Control Module ku Hybrid (Gudiga sare), ka dibna tag in aan xoojinno 6.
    • Haddii danab waa 11-13 volts, cusboonaysiiyo gaaban si batteriga in la habeeyo Vehicle ah, ka dibna tag in aan xoojinno 6.

STEP 3. Hubi danab ee ECA la habeeyo iyo dhulka.

  1. Key off.
  2. Barkinta ECA 8-Jidka isku xira.
  3. Key on.
  4. Cabir danab ka isku xira ECA 8-Way ka Pin H dhulka:
    • Haddii danab ka H oo dhulka ku waa 11-13 volts, bedeli Control Module ku Hybrid (Gudiga sare), ka dibna tag Tallaabada 6.
    • Haddii danab waa ka baxsan kala duwan, tag Tallaabada 4.

STEP 4. Hubi sii System HCM la habeeyo iyo dhulka.

  1. Key off.
  2. Disconnect the HCM 38-Way System Harness Connector.
  3. Cabir iska caabin ah u dhexeeya isku xira System HCM la habeeyo 38-Jidka Pin 13 iyo dhulka.
    • Haddii iska caabin ka Pin 13 si ay dhulka waa 10km ohms ama ka weyn, bedeli Control Module ku Hybrid (Gudiga sare), ka dibna tag Tallaabada 6.
    • Haddii iska caabin ah ka baxsan ee kala duwan, cusboonaysiiyo la habeeyo Vehicle ka ECA si HCM, ka dibna tag Tallaabada 6.

STEP 5. Hubi sii HCM la habeeyo oo la habeeyo ECA.

  1. Key off.
  2. Disconnect the HCM 38-Way System Harness Connector.
  3. Measure the resistance between the HCM Harness 38- Isku xira Jidka isku xira iyo ECA 8-Jidka on musmaarradii soo socda:
    • Gudiga sare Pin 13 si ECA Pin H
      • Haddii iska caabin ah u dhexeeya Pin 13 iyo Pin H waa 0-0.3 ohms, bedeli Lidka Electric ah leewarka (ECA) (oo kaliya haddii Babaca Code waa Active), ka dibna tag Tallaabada 6.
      • Haddii iska caabin ah ka baxsan ee kala duwan, cusboonaysiiyo furan ee suunka u dhexeeya ECA iyo HCM, ka dibna tag Tallaabada 6.

STEP 6. Hubi dayactirka.

  1. Key off.
  2. Key on.
  3. codes Clear, arki Unu qabad la'aan Clear.
  4. Xidhmaan oo dhan Xidhiidhiyayaasha iyo cable ka batari negative.
  5. Wado baabuur iyo isku dayaan in ay dib code ka.
  6. Hubi codes, arki View unu Active iyo Wax qabad la'aan.
    • Haddii codes ma, baaritaanka waa complete.
    • Haddii Code qalad 67 u muuqataa, heli qalad in imtixaanka, tag Tallaabada 1.
    • Haddii code kale oo aan ahayn 67 u muuqataa, arki Khalad List Code Index.

Qof kasta oo gudbinta qayb aad u baahan tahay aynu u leeyihiin! maalin isku mid ah maraakiibta la heli karo, dunida oo dhan.

U BAAHAN TAAGEERO FREE KA MID khubaro OUR?

WAC NOW
email US