Hybrid Eaton Fuller Gudbinta Babaca Code 63 – Gear Select Motor

Khalad code for Hybrid Eaton daydo Systems Drive (MY08) Cuneyso-8E306A-U, Cuneyso-8E306A-UPG, Cuneyso-8E306A-UP, Cuneyso-8E306A-CD, Cuneyso-8E306A-T, Cuneyso-6E606B-CD. Read hoose si aad u bartaan sida si ay u tijaabiso, nadiifiso iyo hagaajin qalad code qalad aad Freightliner, Mack, Peterbilt, Kenworth, Volvo, International, iyo gaari xamuul culus-waajib iyo qalabka. Electric Shifter wuxuu ka kooban yahay laba matoorrada korontada loo yaqaan matoorrada Rail iyo Gear. matoorrada Kuwani guurto farta wareeg ah oo u dhexeeya biraha kala duwan oo ka qayb biraha shaqada. Power waxaa bixisey ka Unit Gudbinta Electronic Control ah (TECU).

khalad Code 63 – Gear Select Motor Ogaanshaha

The shuruud soo socda waa in la buuxiyaa ka hor inta nidaamka ogaadaa gardarrada:

  • TECU danab suuroggalaan waa ka weyn yahay 7 volts iyo ka yar 16 volts.
  • System TECU Battery Low danab Babaca waa qabad la'aan.
  • System TECU Battery danab Babaca tabar yar yahay qabad la'aan.
  • Electric Shifter aan usoo noolaatay iyo farta wareejin uusan u dhaqaaqin.

Note: Marka dhib code ah Wax qabad la'aan tixraac ah Product Baarista Mode (PDM)

Xaaladaha in Calan Babaca Code Active

  • IMF 5 iyo 6 ayaa lagu wadaa markii TECU ku ogaadaa 5 xaaladaha furan ama gaaban joogto ah on Shifter Electric halka circuit drive motor waa la taagtaagan ah 500 MS bareeg.

Uugu Marka Babaca Code 63 ayaa lagu wadaa shuruudaha soo socda dhici:

  • Red "Service" illuminates iftiinka iyo dareenka gubashada ah "F" soo bandhigay marsho ah.
  • Gaf waxa lagu kaydiyaa xasuusta TECU.
  • mode Operation badala in "AutoShift uugu" mode. Haddii qalad ay taasi dhacdo inta uusan u dhaqaaqin, gudbinta ayaa weli ku jira booska marsho hadda iyo xajin furo markii gaariga joojiyo.

Xaaladaha in Calan Babaca Code qabad la'aan

Kaliya unu qabad la'aan la nadiifiyay karaa Unit Gudbinta Electronic Control ah (TECU) ama taariikhda HCM isticmaalaya ServiceRanger. TECU ayaa si toos ah oo ansixiyay unu ka dib markii taariikhda 200 saacadood iyo HCM si toos ah oo ansixiyay unu ka soo taariikhda ka dib qalad uu Wax qabad la'aan, waayo, 200 saacadood.

code qalad Tani waxaa keeni kara wax ka mid ah kuwan soo socda:

  • IMF 5, 6
    • Electric Shifter
    • TECU
    • gudbinta la habeeyo

khalad Code 63 – Gear Select Motor Test

Aqoonsiga Qeybta:

Fuller Harness Front View TECU - Vehicle Interface Connector

Fuller la habeeyo Front View
TECU – Vehicle Wajahadda isku xira

Eaton Fuller transmission gear select motor harness

Deutsch 4-jid isku xira OEM

FIIRO GAAR AH: U dir ka Eaton Qeybta Hybrid oo isku xira Location waayo, Goobaha isku xira in Systems MY08

TECU gear select motor connector locations Eaton Fuller transmission

STEP 1. Hubi sii wareeggeedii Gudbinta la habeeyo.

  1. Ceshano codes qalad Active iyo FMIs la ServiceRanger isticmaalaya Baarista 9-Jidka isku xira.
  2. Key off.
  3. Goostay cable batari negative.
  4. Disconnect the Transmission Harness 38-Way Connector from the TECU.
  5. Cabir iska caabin ah oo u dhexeeya isku xira Gudbinta la habeeyo 38-Jidka Pin 36 iyo Pin 38:
    • Haddii iska caabin ah waa 0.3-150 ohms, tag Tallaabada 2.
    • Haddii iska caabin ah ka baxsan ee kala duwan, tag Tallaabada 3.

STEP 2. Hubi sii wareeggeedii Gudbinta la habeeyo iyo dhulka.

  1. Cabir iska caabin ah oo u dhexeeya isku xira Gudbinta la habeeyo 38-Jidka Pin 36 iyo dhulka.
    • Haddii iska caabin ah waa 10km ohms ama ka weyn, bedeli Unit Gudbinta Electronic Control (TECU)(Oo kaliya haddii Babaca Code waa Active), ka dibna tag Tallaabada 4.
    • Haddii iska caabin yar yahay 10km ohms, tag Tallaabada 3.

STEP 3. Hubi sii Bannaanka Gear Select Motor la habeeyo.

  1. Barkinta 2-Jidka Gear Select Motor isku xira ka la habeeyo Gudbinta ah.
  2. Measure resistance between Gear Select Motor Harness 2-Way Connector Pin A and Pin B and Pin A to ground.
    • Haddii iska caabin ah oo u dhexeeya Pin A iyo B Pin waa 0.3-150 ohms iyo Pin A dhulka ku waa 10km ohms ama ka weyn, bedeli Gudbinta la habeeyo, ka dibna tag Tallaabada 4.
    • Haddii iska caabin ah ka baxsan ee kala duwan, bedeli Electric Shifter, ka dibna tag Tallaabada 4.

STEP 4. Hubi dayactirka.

  1. Key off.
  2. Xidhmaan oo dhan Xidhiidhiyayaasha iyo cable ka batari negative.
  3. Key on.
  4. codes Clear, arki Unu qabad la'aan Clear.
  5. Wado baabuur iyo isku dayaan in ay dib code ka.
  6. Hubi codes, arki View unu Active iyo Wax qabad la'aan.
    • Haddii codes ma, baaritaanka waa complete.
    • Haddii Code qalad 63 u muuqataa, heli qalad in imtixaanka, tag Tallaabada 1.
    • Haddii code kale oo aan ahayn 63 u muuqataa, arki Khalad List Code Index.

Qof kasta oo gudbinta qayb aad u baahan tahay aynu u leeyihiin! maalin isku mid ah maraakiibta la heli karo, dunida oo dhan.

U BAAHAN TAAGEERO FREE KA MID khubaro OUR?

WAC NOW
email US