Hybrid Eaton Fuller Gudbinta Babaca Code 63: Gear Motor Circuit Babaca

Khalad code for Hybrid Eaton daydo Systems Drive (MY09) Cuneyso-8E406A-U / P, Cuneyso-8E406A-UP, Cuneyso-8E406A-UPG, Cuneyso-8E406A-CD, Cuneyso-8E406A-CDG, Cuneyso-8E406A-guud, Cuneyso-8E406A-T, Cuneyso-6E706B-CD, Cuneyso-6E706B-P iyo aad cuneyso-6E706B-UPG. Read hoose si aad u bartaan sida si ay u tijaabiso, nadiifiso iyo hagaajin qalad code qalad aad Freightliner, Mack, Peterbilt, Kenworth, Volvo, International, iyo gaari xamuul culus-waajib iyo qalabka. Gudbinta The Hybrid ku qalabeysan yahay Shifter X-Y in doorteen marsho gudbinta a. The matoorrada X-Y Shifter waxaa gacanta la hadda bixisey by TECU ah inuu u dhaqaaqo kooxda ka dhisan-to-faraha Shift mid ah (xulashada rail) ama foodda iyo-AFT (hawlgelinta qalabka iyo Dhaafida). khalad Code 63 muujinaysaa failure ah Bannaanka gacanta Motor ah Gear iyo foodda iyo-AFT ee dhaqdhaqaaqa faraha ka Shift X-Y.

khalad Code 63: Gear Motor Circuit Babaca Ogaanshaha

Nidaamka tilmaami karaa arrin la circuit X-Y Shifter Gear Motor, TECU xakamaysada motor marsho ama xoog iyo dhulka xidhiidh la TECU ku hoos xaaladaha soo socda:

  • IMF 1 iyo 12 waxaa lagu ogaan karaa marka Gear X-Y ee Motor waxaa usoo noolaatay
  • IMF 5 iyo 6 waxaa lagu ogaan karaa marka Gear X-Y ee Motor aan usoo noolaatay

Note: Marka dhib code ah Wax qabad la'aan tixraac ah Product Baarista Mode (PDM)

Xaaladaha in Calan Babaca Code Active

  • IMF 1 - Data sharci ah laakiin Hoos Normal: Gudbinta ku guuldareysto inuu soo buuxi qiimaha wareeg ah iyo isku aadka qiyaasay hadda Motor Gear ayaa la filayaa hoos.
  • IMF 5 - Hadda Hoos Normal ama Open Circuit: TECU ogaadaa circuit furan ama xaalad gaaban-to-dhulka ah ku soo wareegi jiray Gear Motor, waayo, 0.5 seconds at kor awood ama ka hor wareeg ah.
  • IMF 6 - Hadda Kor Normal ama Shorted Circuit: TECU ogaadaa gaaban-to-xoog ku soo wareegi jiray Gear Motor, waayo, 0.5 seconds at awood-up ama ka hor wareeg ah.
  • IMF 12 - Device Intelligent Bad: Gudbinta ku guuldareysto inuu soo buuxi wareeg ah oo TECU ku ogaadaa isbedbedelka go'aysa in danab sahayda ay sabab u tahay isku xirnaanta dadka saboolka ah, shorted circuit Gear Motor ama failure hardware ah TECU ah.

Uugu Marka Babaca Code 63 ayaa lagu wadaa shuruudaha soo socda dhici:

  • widhwidha "F" ee shaashadda marsho.
  • widhwidha iftiin Service (haddii aan qalabaysnayn).
  • Engine laga yaabaa in aanay kumbyuutarradeedu.
  • Gudbinta laga yaabaa in aanay ku lug marsho ka dhex-dhexaad ah.
  • Gudbinta ma baddalo halka gaariga lagu dhaqaaqin.
  • Ilaa qalad uu noqdo mid Wax qabad la'aan, darawalka laga yaabaa in engine demiyo la isugu gudbiyo ee marsho.

Xaaladaha in Calan Babaca Code qabad la'aan

IMF 1, 12: Gaf waxaa loo dhigay qabad la'aan marka shaqada ay kuu dhamaato.
IMF 5, 6: Gaf waxaa loo dhigay qabad la'aan marka xaaladda circuit furan ama gaaban aan la ogaan waayo, 0.5 seconds.

code qalad Tani waxaa keeni kara wax ka mid ah kuwan soo socda:

IMF 1, 5

  • gudbinta la habeeyo
    • Gaf waxaa loo dhigay qabad la'aan marka shaqada ay kuu dhamaato.
    • boosteejada xodan, faafidda, mirdheen ama dabacsan
    • Taararka shorted dhulka ku, shorted si xoog ama furan
  • X-Y Shifter Gear Motor
    • boosteejada xodan, faafidda, mirdheen ama dabacsan
    • Taararka shorted dhulka ku, shorted si xoog ama furan
    • Rail Motor shorted dhulka, qayb gaaban dhulka, shorted si xoog ama furan
    • Rail Motor failure gudaha
  • TECU
    • failure Gudaha

IMF 6

  • gudbinta la habeeyo
    • Taararka gaabisay in ay awood
  • TECU
    • failure Gudaha

IMF 12

  • OEM Power Supply
    • awood Poor ama sahayda dhulka si TECU (waxaa laga yaabaa in lala Xeerarka Babaca 33 ama 34)
    • Battery failure
    • boosteejada xodan, faafidda, mirdheen ama dabacsan
    • Taararka shorted dhulka ku, shorted si xoog ama furan
  • Baytariyada OEM
    • failure Gudaha
  • OEM 30-amp Battery Fiyuus
    • boosteejada xodan, faafidda, mirdheen ama dabacsan
    • Fiyuuska maqan ama khaldan fadhiya
  • TECU
    • failure Gudaha

khalad Code 63: Gear Motor Circuit Babaca Test

Aqoonsiga Qeybta:

circuit motor aqoonsiga Gear qayb qalad Eaton Fuller gudbinta

1. X-Y Shifter
2. 2-Jidka isku xira Gear Motor (buluug)
3. 2-Jidka isku xira Gear Motor Body (buluug)
4. 4-Jidka isku xira Baarista
5. 38-Jidka isku xira Gudbinta la habeeyo
6. 38-Jidka isku xira Vehicle la habeeyo
7. Unit Gudbinta Control Electronic (TECU)

FIIRO GAAR AH: U dir ka Eaton Qeybta Hybrid oo isku xira Location waayo, Goobaha isku xira in Systems MY09.

goobta TECU for motor marsho dhib qalad circuit

STEP 1. Hubi codes qalad Active ama qabad la'aan.

  1. Key on la off engine.
  2. Connect ServiceRanger.
  3. Retrieve Snapshot and VPA data by creating a Service Activity Report within ServiceRanger.
  4. Update transmission software to latest available level.
    digniin: Si looga fogaado waxyeelo TECU ah, isticmaal adabtarada isgaarsiinta Eaton-ansixiyey iyo hubiyo in dhammaan hababka satellite naafada ah ka hor inta la xariirta software.
  5. Dib u soo ceshano iyo diiwaan codes qalad gudbinta iyo FMIs, iyo dhacdooyinka iyo timestamps.
    • Haddii Code Babaca midkood 33 ama 34 waa Active, waxa dhibta ugu horeysay per Habka Go'doon Babaca Code.
    • Haddii Babaca Code 61 waa Active iyo Babaca Code 33 ama Babaca Code 34 waa qabad la'aan ama ma dhigay, tag Tallaabada 4.
    • Haddii Babaca Code 61 Waa Wax qabad la'aan iyo khalad Code 33 ama khalad Code 34 waa qabad la'aan ama ma dhigay, tag Tallaabada 2.

STEP 2. Hubi xaaladda awoodda iyo dhulka sahayda.

  1. Iney qabtaan korontada Pretest Gen1 ECA. Qor akhriyey(s) ka Test Load in Tallaabada 3 of Pretest korontada ku.
    • Haddii Pretest korontada ku fashilanto, dayactirka per tilmaamaha korontada Pretest. hawlgalka gaari tijaabada kucelinta.
    • Haddii Pretest korontada ku baaso, tag Tallaabada 3.

STEP 3. Isticmaal Product Baarista (XPIEIV) Mode si ay u helaan go'aysa fashilaad.

  1. biriiga la dhigto dhigay iyo giraangirihii chock.
  2. gudbinta Place in XPIEIV (Product Baarista) Mode.
  3. Wiggle wiring and connections between the 38- Jidka isku xira Vehicle la habeeyo at TECU iyo batari gaari sahay ah. Fiiri calaamadaha ku xoqeen ama barkiwaraabe.
  4. taararka oynayo iyo xidhiidhada u dhexeeya 38-Jidka Gudbinta la habeeyo isku xira ee TECU iyo madow ah (X-Rail Motor) 2-Jidka isku xira Gudbinta la habeeyo.
  5. taararka oynayo iyo xidhiidhada u dhexeeya 38-Jidka isku xira ee TECU iyo buluug (Y-Gear Motor) 2- Jidka isku xira Gudbinta la habeeyo.
  6. Mode XPIEIV Exit by laadyo hoos.
    Muhiim: U oggolow 2-3 daqiiqo TECU si-u sameeyaan halkii isku xigxiga oo dhamaystiran awood-down ka hor inta dacwadu.

    • Haddii cilladaha dhigay Active halka ruxruxaya la habeeyo Vehicle ah, tixraac xeerarka OEM dayactirka ama bedelida taararka OEM ah. Tag Tallaabada 13.
    • Haddii qalad kasta oo dhigaya Active halka ruxruxaya la habeeyo Gudbinta ah, bedeli la habeeyo Gudbinta ah. Tag Tallaabada 13.
    • Haddii ay maya tahay unu dhigay Active halka ruxruxaya labada suunka, tag Tallaabada 4.

STEP 4. Hubi oo FMI set.

  1. Go'aanso oo FMI set for Babaca Code 63.
    • Haddii FMI 1 ama 12 set, tag Tallaabada 5.
    • Haddii FMI 5 dhigay oo waa Active, tag Tallaabada 5.
    • Haddii FMI 5 dhigay oo waa qabad la'aan, tag Tallaabada 11.
    • Haddii FMI 6 set, bedeli TECU. Tag Tallaabada 13.

STEP 5. Hubi iska caabin ah oo sax ah iyada oo la habeeyo Gudbinta iyo Gear Motor.

  1. Key off.
  2. Goostay 38-Jidka Gudbinta la habeeyo isku xira ka TECU ah.
  3. Hubi in xira 38-Jidka waa ka xor daxalka; boosteejada aan xootay, faafidda, ama boosteejada dabacsan; oo waxaa jira waxyeello u lahayn in ay jidhka isku xira ee.
  4. Cabir iska caabin ah oo u dhexeeya 38-Jidka isku xira Pin 36 iyo Pin 38. reading Record(s).38 jidka isku xira
  5. Cabir iska caabin ah u dhexeeya 38-Jidka isku xira Pin 36 iyo dhulka. reading Record(s).qiyaas-marsho-motor-caabin Eaton Fuller gudbinta
  6. Isbarbardhigga reading(s) si ay u kala duwan oo ku qeexan:
    • Haddii reading(s) waa kala duwan, tag Tallaabada 6.
    • Haddii reading(s) waa out of kala duwan, tag Tallaabada 8.

STEP 6. Hubi oo FMI set.

  1. Go'aanso oo FMI set for Babaca Code 63.
    • Haddii FMI 1 set, bedeli X-Y Shifter iyo Gudbinta la habeeyo. Tag Tallaabada 13.
    • Haddii FMI 5 set, tag Tallaabada 7.
    • Haddii FMI 12 set, tag Tallaabada 8.

STEP 7. Hubi iska caabin circuit gudaha ee TECU ah.

  1. Reconnect 38-Way Transmission Harness to the TECU.
  2. Goostay buluug 2-Jidka Gear Motor isku xira ka la habeeyo Gudbinta ah.
  3. Ka saar daboolka isku xira oo ka mid ah 4-Jidka isku xira Baarista.
  4. Cabir iska caabin ah oo u dhexeeya 2-jidka isku xira Pin A iyo 4-Jidka isku xira Pin C. reading Record(s).38 habka gudbinta suunka si TECU
  5. Reverse meter leads and take the same measurement between the 2-Way Connector Pin A and the 4-Way Connector Pin C. reading Record(s).Eaton Fuller 38 habka gudbinta suunka si TECU
  6. Isbarbardhigga reading(s) si ay u kala duwan oo ku qeexan cajalado.
    • Haddii reading(s) waa kala duwan, badalo X-Y Shifter. Tag Tallaabada 13.
    • Haddii reading(s) waa out of kala duwan, bedeli TECU ah. Tag Tallaabada 13.

STEP 8. Hubi iska caabin ah ee Gear X-Y ee Motor iyo xaqiijiyo motor aan shorted dhulka ku.

  1. Key off.
  2. Goostay buluug 2-Jidka Gear Motor isku xira ka la habeeyo Gudbinta ah.
  3. Hubi 2-jidka isku xira waa ka xor daxalka kasta; boosteejada la xootay, faafidda ama dabacsan, oo waxaa jira waxyeello u lahayn in ay jidhka isku xira ee.
  4. Cabir iska caabin ah oo u dhexeeya isku xira Pin 2-jidka A iyo B Pin. reading Record(s).2-Jidka isku xira Gear Motor
  5. Measure resistance between the 2-Way Connector Pin A and ground. reading Record.2 jidka isku xira
  6. Isbarbardhigga reading(s) si ay u kala duwan oo ku qeexan.
    • Haddii reading(s) waa kala duwan, tag Tallaabada 9.
    • Haddii reading(s) waa out of kala duwan, badalo X-Y Shifter. Tag Tallaabada 13.

STEP 9. Hubi oo FMI set.

  1. Go'aanso oo FMI set for Babaca Code 63.
    • Haddii FMI 1 set, bedeli Gudbinta la habeeyo. Tag Tallaabada 13.
    • Haddii FMI 5 set, bedeli Gudbinta la habeeyo. Tag Tallaabada 13.
    • Haddii FMI 12 set, tag Tallaabada 10.

STEP 10. Shuban Test korontada gaariga si TECU ah.

  1. Key off.
  2. Hubi awood batari TECU iyo sahayda dhulka ka la habeeyo Vehicle ku xiran yahay si sax ah oo aan mirdheen, waxyeello, ama dabacsan.
  3. Goostay 38-Jidka Vehicle la habeeyo isku xira garoonka TECU ah.
  4. Hubi in xira 38-Jidka waa ka xor daxalka, waxaa jira laaban lahayn, faafidda, ama boosteejada dabacsan, oo waxaa jira waxyeello u lahayn in ay jidhka isku xira ee.
  5. Load tijaabiyo suunka korontada gaariga la il dibadeed ah load. Use a sealed beam headlamp or blower motor attached to Pin 36 (xoog) iyo Pin 38 (dhulka). Load Test for 5 daqiiqo si loo xaqiijiyo xambaarka load a qaadi doonaa fiyuuska 30-amp ku rakiban.TECU
  6. Oynayo suunka lagu jiro Test Load ka baytariyada baabuurta si TECU ah ee.
    • Haddii arrimaha waxaa la helay iyada oo la habeeyo Vehicle ama Xidhiidhiyayaasha, tixraac xeerarka OEM dayactirka ama bedelida taararka OEM iyo sii Test Load.
    • Haddii la habeeyo Vehicle ma qaadi load a, tixraac xeerarka OEM dayactirka ama bedelida taararka OEM. Tag Tallaabada 13.
    • Haddii ay maya tahay arrimaha waxaa la helay iyada oo la habeeyo ku Vehicle ama Xidhiidhiyayaasha iyo korontada xambaartaa load a, bedeli TECU ah. Tag Tallaabada 13.

STEP 11. Hubi iska caabin ah oo sax ah iyada oo la habeeyo Gudbinta iyo Gear Motor.

  1. Key off.
  2. Goostay 38-Jidka Gudbinta la habeeyo isku xira ka TECU ah.
  3. Hubi in xira 38-Jidka waa ka xor daxalka, waxaa jira laaban lahayn, faafidda, ama boosteejada dabacsan, oo waxaa jira waxyeello u lahayn in ay jidhka isku xira ee.
  4. Cabir iska caabin ah oo u dhexeeya 38-Jidka isku xira Pin 36 iyo Pin 38. reading Record.caabin sax ah iyada oo la habeeyo Gudbinta iyo gudbinta Gear Motor Eaton Fuller
  5. Cabir iska caabin ah oo u dhexeeya 38-Jidka isku xira Pin 36 iyo dhulka. reading Record.Cabir gudbinta iska caabin motor marsho Eaton Fuller
  6. Isbarbardhigga reading(s) kala duwan ku cad miiska:
    • Haddii reading(s) waa kala duwan, badalo X-Y Shifter. Tag Tallaabada 13.
    • Haddii reading(s) waa out of kala duwan, tag Tallaabada 12.

STEP 12. Hubi iska caabin gudaha oo ka mid ah Motor X-Y Shifter Gear iyo xaqiijiyo motor aan shorted dhulka ku.

  1. Key off.
  2. Goostay buluug 2-Jidka Gear Motor isku xira ka la habeeyo Gudbinta ah.
  3. Hubi in isku xira 2-Jidka waa ka xor daxalka, waxaa jira laaban lahayn, faafidda, ama boosteejada dabacsan, oo waxaa jira waxyeello u lahayn in ay jidhka isku xira ee.
  4. Cabir iska caabin ah oo u dhexeeya isku xira Pin 2-jidka A iyo B Pin. Record reading in miiska.imtixaanka dhulka Shifter Gear Motor Eaton Fuller gudbinta
  5. Cabir iska caabin ah inta u dhaxaysa 2-jidka isku xira Pin A iyo dhulka. reading Record.Cabbirka iska caabin motor marsho Eaton Fuller gudbinta
  6. Isbarbardhigga resistances kala duwan ku cad miiska.
    • Haddii labada resistances waa kala duwan, bedeli la habeeyo Gudbinta ah. Tag Tallaabada 13.
    • Haddii mid iska caabin ah waa out of kala duwan, replace the X- Y Shifter. Tag Tallaabada 13.

STEP 13. Hubi dayactirka.

  1. Key off.
  2. Xidhmaan oo dhan Xidhiidhiyayaasha iyo cable ka batari negative.
  3. 3. Key on la off engine.
  4. codes Clear, arki Unu qabad la'aan Clear.
  5. Wado baabuur iyo isku dayaan in ay dib code ama nuqul arrinta.
  6. Hubi codes, arki View unu Active iyo Wax qabad la'aan.
    • Haddii codes ma, baaritaanka waa complete.
    • Haddii Code qalad 63 u muuqataa, heli qalad in imtixaanka, tag Tallaabada 1.
    • Haddii code kale oo aan ahayn 63 u muuqataa, arki Khalad List Code Index.

Qof kasta oo gudbinta qayb aad u baahan tahay aynu u leeyihiin! maalin isku mid ah maraakiibta la heli karo, dunida oo dhan.

U BAAHAN TAAGEERO FREE KA MID khubaro OUR?

WAC NOW
email US