Hybrid Eaton Fuller Gudbinta Babaca Code 61: Rail Motor Circuit Babaca

Khalad code for Hybrid Eaton daydo Systems Drive (MY09) Cuneyso-8E406A-U / P, Cuneyso-8E406A-UP, Cuneyso-8E406A-UPG, Cuneyso-8E406A-CD, Cuneyso-8E406A-CDG, Cuneyso-8E406A-guud, Cuneyso-8E406A-T, Cuneyso-6E706B-CD, EH-6E706B-P and EH-6E706B-UPG The Hybrid Transmission is equipped with an X-Y Shifter that selects a transmission gear. The X-Y Shifter motors are controlled with electrical current supplied by the TECU to move the Shift Finger either side-to-side (xulashada rail) ama foodda iyo-AFT (hawlgelinta qalabka iyo Dhaafida). khalad Code 61 indicates a failure with the circuit controlling the Rail Motor and the side-to-side movement of the X-Y Shift Finger. Read hoose si aad u bartaan sida si ay u tijaabiso, nadiifiso iyo hagaajin qalad code qalad aad Freightliner, Mack, Peterbilt, Kenworth, Volvo, International, iyo gaari xamuul culus-waajib iyo qalabka. The Converter DC / DC ku xiran Power Electronics Carrier ah (PEC), kaas oo bixiya 340 volts DC. danab waa la dhimay ilaa 12-volts DC oo uu xusay in nidaamka 12-volt lagu jiro engine off hawlgalka PTO. DC / DC waxay leedahay joogto ah 14.2 (± 0.2) (MY08 Systems) ama 12.6 (System MY09) volts saarka iyo kordhisaa amperage la baahida gaariga ilaa 1.5 kw ama 120 amps.

khalad Code 61: Rail Motor Circuit Babaca Ogaanshaha

The shuruud soo socda waa in la buuxiyaa ka hor inta nidaamka ogaadaa gardarrada:

The system can identify an issue with the X-Y Shifter Rail Motor circuit, the TECU rail motor controller or the power and ground connections to the TECU under the following conditions:

  • IMF 1 iyo 12 can be detected when the X-Y Rail Motor is energized
  • IMF 5 iyo 6 can be detected when the X-Y Rail Motor is not energized

Note: Marka dhib code ah Wax qabad la'aan tixraac ah Product Baarista Mode (PDM)

Xaaladaha in Calan Babaca Code Active

  • IMF 1 - Data sharci ah laakiin Hoos Normal: Gudbinta ku guuldareysto inuu soo buuxi qiimaha wareeg ah iyo isku aadka qiyaasay hadda Motor Rail la hoos filayaa.
  • IMF 5 - Hadda Hoos Normal ama Open Circuit: TECU detects an open circuit or a short-to-ground condition on the Rail Motor circuit for 0.5 second at power up or prior to a shift.
  • IMF 6 - Hadda Kor Normal ama Shorted Circuit: TECU detects a short-to-power on the Rail Motor circuit for 0.5 seconds at kor awood ama ka hor wareeg ah.
  • IMF 12 - Device Intelligent Bad: Transmission fails to complete a shift and the TECU detects intermittent fluctuations in supply voltage due to poor connections, shorted Rail Motor circuit or a hardware failure of the TECU.

Uugu Marka Babaca Code 61 ayaa lagu wadaa shuruudaha soo socda dhici:

  • widhwidha "F" ee shaashadda marsho.
  • widhwidha iftiin Service (haddii aan qalabaysnayn).
  • Engine laga yaabaa in aanay kumbyuutarradeedu.
  • Gudbinta laga yaabaa in aanay ku lug marsho ka dhex-dhexaad ah.
  • Gudbinta ma baddalo halka gaariga lagu dhaqaaqin.
  • Ilaa qalad uu noqdo mid Wax qabad la'aan, darawalka laga yaabaa in engine demiyo la isugu gudbiyo ee marsho.

Xaaladaha in Calan Babaca Code qabad la'aan

IMF 1, 12: Gaf waxaa loo dhigay qabad la'aan marka shaqada ay kuu dhamaato.
IMF 5, 6: Gaf waxaa loo dhigay qabad la'aan marka xaaladda circuit furan ama gaaban aan la ogaan waayo, 0.5 seconds.

code qalad Tani waxaa keeni kara wax ka mid ah kuwan soo socda:

  • IMF 1, 5
    • Gudbinta la habeeyo
    – boosteejada xodan, faafidda, mirdheen ama dabacsan
    – Taararka shorted dhulka ku, shorted si xoog ama furan
    • X-Y Shifter Rail Motor
    – boosteejada xodan, faafidda, mirdheen ama dabacsan
    – Rail Motor shorted dhulka, qayb gaaban dhulka, shorted si xoog ama furan
    – Rail Motor failure gudaha
    • TECU
    – failure Gudaha
  • IMF 6
    • Gudbinta la habeeyo
    – Taararka shorted si xoog
    • TECU
    – failure Gudaha
  • IMF 12
    • OEM Power Supply
    – awood Poor ama sahayda dhulka si TECU (waxaa laga yaabaa in lala Xeerarka Babaca 33 ama 34)
    – Battery failure
    – boosteejada xodan, faafidda, mirdheen ama dabacsan
    – Taararka shorted dhulka ku, shorted si xoog ama furan
    • Baytariyada OEM
    – failure Gudaha
    • OEM 30-amp Battery Fiyuus
    – boosteejada xodan, faafidda, mirdheen ama dabacsan
    – Fiyuuska maqan ama khaldan fadhiya
    • TECU
    – failure Gudaha

khalad Code 61: Rail Motor Circuit Babaca Test

Aqoonsiga Qeybta:

Rail Motor Circuit Babaca

1. X-Y Shifter
2. 2-Jidka Tareenka isku xira Motor (madow)
3. 2-Jidka Tareenka isku xira Motor Body (madow)
4. 4-Jidka isku xira Baarista
5. 38-Jidka isku xira Gudbinta la habeeyo
6. 38-Jidka isku xira Vehicle la habeeyo
7. Unit Gudbinta Control Electronic (TECU)

FIIRO GAAR AH: U dir ka Eaton Qeybta Hybrid oo isku xira Location waayo, Goobaha isku xira in Systems MY09.

TECU meelaha isku xira motor rail

1. Unit Gudbinta Control Electronic (TECU)
2. 38-Jidka isku xira Gudbinta la habeeyo
3. 2-Jidka Tareenka isku xira Motor Body (madow)
4. 2-Jidka Tareenka isku xira Motor (madow)
5. 4-Jidka isku xira Baarista

digniinaha & ganaaxyada

Danger: Danger muujinaysaa aad la si xun u dhaawacmay doonaa ama la dilay haddii aadan raaci doonaa habraaca ku tilmaamay.
digniin: Digniin halis degdeg ah, taas oo keeni karta dhaawac shakhsi daran haddii aadan raaci doonaa habraaca ku tilmaamay.
digniin: Digniin muujinaysaa gaariga ama hantida dhaawac dhici kara haddii aadan raaci doonaa habraaca ku tilmaamay.

Note: Note muujinaysaa faahfaahin dheeraad ah u gargaartaan in cudurka ama dayactir ah component / Nidaamka.

Raac hannaanka ku qeexan amarka tilmaamay in ay ka fogaadaan dhaawac shakhsi ahaaneed:

1. Haddii loo yaqaano a high-voltage yihiin hareeraha baabuurka iyo ka joojinta la geliyo PEC ah, qofka kaliya ee la ogol yahay waa in ay u bilaabaan gaariga uu yahay qofka saxiixay tag joojinta.
2. Ka hor inta shaqeeya on gaari ama ka soo baxaya cab halka engine la socda, waa in aad meel lever wareeg ee "N" dhigay jejebiyey la dhigto, iyo xannibi giraangirihiina.
3. Sababo nabadgelyo, had iyo jeer ka qayb biriiga adeegga ka hor doorashada jagooyinka marsho ka "N."
4. Ka hor inta aadan bilaabin gaari had iyo jeer la fadhiya kursiga darawalka, dooro "N" on gacanta ku wareejin ah, oo qarka u saaran biriiga la dhigto.
5. In baabuurta la ePTO, engine iyo / ama
Motor / Generator bilaabi kartaa in hab ePTO. Marna qabtaan dayactirka ama shaqeeyaan gaadiidka, halka hab this.
6. 12-Waat Battery wanaagsan (+) iyo negative (-) waa in la hor ineysan si alxanka kasta oo gaari kasta Hybrid qalabaysan.

digniin: Raac hannaanka ku qeexan amarka tilmaamay in ay ka fogaadaan cillad qalabka ama dhaawac.
digniin: Ha sii daayo jejebiyey la dhigto ama isku dayaan in ay doortaan marsho ilaa cadaadiska hawada waa heerka saxda ah.
digniin: Si looga fogaado waxyeelo ay ku gudbinta lagu jiro jiidaya meesha lever wareeg ee "N" oo kor u giraangiraha drive ka off dhulka ama barkinta driveline ah.

Digniinaha High-danab & ganaaxyada

  • Isticmaal CO2 ama qallalan Chemical Dab bakhtiiyeyaasha.
  • The taararka a high-voltage waxaa daboolay ningax orange ama tubbada convoluted iyo sumadaha digniin at Xidhiidhiyayaasha ku calaamadsan.
  • All Hybrid Eaton® Diesel / baabuurta Electric waxaa la qorayaa 'Hybrid’ dibaddeeda oo gaariga, oo ay la socdaan calaamad wareejin on dumisaan ah.
  • U dir ka OEM meel gaarka ah ee jiifku Jaha qaybaha hybrid.
  • HA jarjar ah fiilooyinka a high-voltage orange.
  • HA jarjar ama furo PEC ah.
  • HA jarjar ama furo Converter DC / DC.
  • HA jarjar ama furo Inverter ah.

aag-dhuleed A waa in kor loo dhigay iyo high-voltage dahaaran gacno gashi rabar (fasalka 0 la sokeeye maqaar) waxaa loo baahan yahay ka hor inta aan la shaqeeyo on a high-voltage. Dhicitaanka in la raaco tilmaamaha keeni kartaa in dhaawac shakhsi aad u daran ama dhimasho.
gacmo gashi The caag-dahaaran tahay in la xirto, halka ka shaqeeya nidaamka a high-voltage yihiin fasalka 0 la sokeeye maqaar. gacno gashi rabar ah waa in la baaro inta aan la isticmaalin KASTA socda nidaamka caag imtixaanka gashi ningax laga helay "Tools Baarista / Publications Service" ee bogga 6. Dhicitaanka in la raaco tilmaamaha keeni kartaa in dhaawac shakhsi aad u daran ama dhimasho.
Ka hor baarista ama ka shaqeeya fiilooyin a high-voltage ama qaybaha "Habka Adeegga xiritaanka High-danab iyo Power Up-" ee bogga 4 Waa in la raaco. Dhicitaanka in la raaco tilmaamaha keeni kartaa in dhaawac shakhsi aad u daran ama dhimasho.
The qalabka Shaqoxannibista iyo Tagout waa saaro kaliya farsamo yaqaan ah in kaalinta qalabka Shaqoxannibista iyo Tagout on gaariga. Dhicitaanka in la raaco tilmaamaha keeni kartaa in dhaawac shakhsi aad u daran ama dhimasho.
High-danab gacno gashi rabar dahaaran (fasalka 0 la sokeeye maqaar) waa in la gashanaadaa markuu ka shaqeeya kasta
fiilooyinka a high-voltage. The "xiritaanka High-danab Service iyo Power Up-Habka" ee bogga 4 waa in la hor raacay in ay ka saareen wax fiilooyinka a high-voltage. Dhicitaanka in la raaco tilmaamaha keeni kartaa in dhaawac shakhsi aad u daran ama dhimasho.
fiilooyinka High-danab iyo xarkaha waa orange iyo waxa ku jira qoran calaamadda digniinta ee Xidhiidhiyayaasha ah. qaybaha High-danab waxaa lagu calaamadeeyay leh calaamadda a. High-danab gacno gashi rabar dahaaran (fasalka 0 la sokeeye maqaar) waa in la isticmaalaa marka ka shaqeeya mid ka mid ah qaybaha kuwaas oo. Dhicitaanka in la raaco tilmaamaha keeni kartaa in dhaawac shakhsi aad u daran ama dhimasho.

Nidaamka High-danab xiritaanka Service

Xiritaanka Service High-danab iyo Habka Power Up-1. Raac "High-danab Work Area" nidaamka.
2. Hel ka Switch Service PEC cas on hore ee PEC iyo riixdo demiso.
3. Ka saar Cover Switch Service iyo rakibi qaybta ka joojinta (J48506).
4. tag giijin in qaybta ka joojinta.
5. Hubi in ay Switch Service PEC aan ka booska off dhaqaajin karin.
6. U ogolow nidaamka si ay u dejiyaan ugu yaraan 5 daqiiqo oo ay u guto danab sare.
7. Connect ServiceRanger iyo u arkaan Monitor Data PID 116 loo yaqaan "fili karo Battery High-danab." Isticmaalka SPN 520323 waayo xidhiidh J1939 "Battery danab RB" (Relay Box).
8. danab waa in uu noqdo 30 volts ama ka yar. Haddii danab ku xusan yahay 30 volts, uma shaqeeyaan on gaariga iyo xiriiri Eaton® ee 1-800-826-HELP (4357).
9. muhiim ah ka suuroggalaan Dami iyo sii wadi in lagu dhiso ama tallaabo dhib.
Note: danab ugu dhaco, si eber markii fure u off waa.

High-danab Service Power Up-Habka

1. Ku rakib dhan Xidhiidhiyayaasha a high-voltage galay ay qufulan.
2. Haddii aad tahay qof ka shaqeeya on gaariga, ka saar qaybta ka joojinta iyo tag.
3. Dib qaybta ka joojinta badan Switch Service.
4. Jiid Adeegga beddelo baxay oo ha set baabuurta 2 daqiiqo.
5. gaari bilow marka ay habboon tahay.

Eaton Qeybta Hybrid oo isku xira Location

Eaton Qeybta Hybrid iyo Goobaha isku xira MY08 Systems

Eaton Qeybta Hybrid oo isku xira Location MY09 Systems

Eaton Qeybta Hybrid iyo Goobaha isku xira MY09 Systems

STEP 1. Hubi codes qalad Active ama qabad la'aan.

  1. Key on la off engine.
  2. Connect ServiceRanger.
  3. Retrieve Snapshot and VPA data by creating a Service Activity Report within ServiceRanger.
  4. Update transmission software to latest available level.
    digniin: Si looga fogaado waxyeelo TECU ah, isticmaal adabtarada isgaarsiinta Eaton-ansixiyey iyo hubiyo in dhammaan hababka satellite naafada ah ka hor inta la xariirta software.
  5. Dib u soo ceshano iyo diiwaan codes qalad gudbinta iyo FMIs, iyo dhacdooyinka iyo timestamps.
    • Haddii Code Babaca midkood 33 ama 34 waa Active, waxa dhibta ugu horeysay per Habka Go'doon Babaca Code.
    • Haddii Babaca Code 61 waa Active iyo Babaca Code 33 ama Babaca Code 34 waa qabad la'aan ama ma dhigay, tag Tallaabada 4.
    • Haddii Babaca Code 61 Waa Wax qabad la'aan iyo khalad Code 33 ama khalad Code 34 waa qabad la'aan ama ma dhigay, tag Tallaabada 2.

STEP 2. Hubi xaaladda awoodda iyo dhulka sahayda.

  1. Iney qabtaan korontada Pretest Gen1 ECA. Qor akhriyey(s) ka Test Load in Tallaabada 3 of Pretest korontada ku.
    • Haddii Pretest korontada ku fashilanto, dayactirka per tilmaamaha korontada Pretest. hawlgalka gaari tijaabada kucelinta.
    • Haddii Pretest korontada ku baaso, tag Tallaabada 3.

STEP 3. Isticmaal Product Baarista (XPIEIV) Mode si ay u helaan go'aysa fashilaad.

  1. biriiga la dhigto dhigay iyo giraangirihii chock.
  2. gudbinta Place in XPIEIV (Product Diagnositc) Mode.
  3. Wiggle wiring and connections between the 38- Way OEM Vehicle la habeeyo isku xira garoonka TECU iyo batari gaari sahay ah. Fiiri calaamadaha ku xoqeen ama barkiwaraabe.
  4. taararka oynayo iyo xidhiidhada u dhexeeya 38-Jidka Gudbinta la habeeyo isku xira ee TECU iyo madow ah (X-Rail Motor) 2-Jidka isku xira Gudbinta la habeeyo.
  5. taararka oynayo iyo xidhiidhada u dhexeeya 38-Jidka isku xira ee TECU iyo buluug (Y-Gear Motor) 2- Jidka isku xira Gudbinta la habeeyo.
  6. Mode XPIEIV Exit by laadyo hoos.
    Muhiim: U oggolow 2-3 daqiiqo TECU ah si ay u qabtaan dhamaystiran xigxiga awood-down ka hor inta dacwadu.

    • Haddii cilladaha dhigay Active halka ruxruxaya la habeeyo Vehicle ah, tixraac xeerarka OEM dayactirka ama bedelida taararka OEM ah. Tag Tallaabada 13.
    • Haddii qalad kasta oo dhigaya Active halka ruxruxaya la habeeyo Gudbinta ah, bedeli la habeeyo Gudbinta ah. Tag Tallaabada 13.
    • Haddii ay maya tahay unu dhigay Active halka ruxruxaya labada suunka, tag Tallaabada 4.

STEP 4. Hubi oo FMI set.

  1. Go'aanso oo FMI set for Babaca Code 61.
    • Haddii FMI 1 ama 12 set, tag Tallaabada 5.
    • Haddii FMI 5 dhigay oo waa Active, tag Tallaabada 5.
    • Haddii FMI 5 dhigay oo waa qabad la'aan, tag Tallaabada 11.
    • Haddii FMI 6 set, bedeli TECU. Tag Tallaabada 13.

STEP 5. Hubi iska caabin ah oo sax ah iyada oo la habeeyo Gudbinta iyo Tareenka Motor.

  1. Key off.
  2. Goostay 38-Jidka Gudbinta la habeeyo isku xira ka TECU ah.
  3. Hubi in xira 38-Jidka waa ka xor daxalka; boosteejada aan xootay, faafidda, ama boosteejada dabacsan; oo waxaa jira waxyeello u lahayn in ay jidhka isku xira ee.
  4. Cabir iska caabin ah oo u dhexeeya 38-Jidka isku xira Pin 35 iyo Pin 37. reading Record.
    Cabir iska caabin ah oo u dhexeeya 38-Jidka isku xira Pin 35 iyo Pin 37. reading Record.
  5. Cabir iska caabin ah u dhexeeya 38-Jidka isku xira Pin 35 iyo dhulka. 38-Jidka isku xira pin 35
  6. Isbarbardhigga reading(s) si ay u kala duwan oo ku qeexan:
    • Haddii reading(s) waa kala duwan, tag Tallaabada 6.
    • Haddii reading(s) waa out of kala duwan, tag Tallaabada 8.

STEP 6. Hubi oo FMI set.

  1. Go'aanso oo FMI set for Babaca Code 61.
    • Haddii FMI 1 set, bedeli X-Y Shifter iyo Gudbinta la habeeyo. Tag Tallaabada 13.
    • Haddii FMI 5 set, tag Tallaabada 7.
    • Haddii FMI 12 set, tag Tallaabada 8.

STEP 7. Hubi iska caabin circuit gudaha ee TECU ah.

  1. Reconnect 38-Way Transmission Harness to the TECU.
  2. Goostay madow 2-WayRail Motor isku xira ka la habeeyo Gudbinta ah.
  3. Ka saar daboolka isku xira oo ka mid ah 4-Jidka isku xira Baarista.
  4. Cabir iska caabin ah oo u dhexeeya 2-jidka isku xira Body Pin A iyo 4-Jidka isku xira Pin C. reading Record(s).2-Jidka isku xira Body
  5. Reverse meter leads and take the same measurement between the 2-Way Connector Pin A and the 4-Way Connector Pin C. reading Record(s).Fuller 4-Jidka isku xira Pin C
  6. Isbarbardhigga reading(s) si ay u kala duwan oo ku qeexan cajalado.
    • Haddii labada akhrinta waa kala duwan, badalo X-Y Shifter. Tag Tallaabada 13.
    • Haddii labada akhrinta waa out of kala duwan, bedeli TECU ah. Tag Tallaabada 13.

STEP 8. Hubi iska caabin ah ee Rail X-Y ee Motor iyo xaqiijiyo motor aan shorted dhulka ku.

  1. Key off.
  2. Goostay buluug 2-Jidka Tareenka isku xira Motor ka la habeeyo Gudbinta ah.
  3. Hubi 2-jidka isku xira waa ka xor daxalka kasta; boosteejada la xootay, faafidda ama dabacsan, oo waxaa jira waxyeello u lahayn in ay jidhka isku xira ee.
  4. Measure resistance between the black 2-Way Connector Pin A and Pin B. reading Record(s). 2-Jidka Tareenka isku xira Motor Pin A iyo B Pin
  5. Measure resistance between the 2-Way Connector Pin A and ground. reading Record.Eaton Fuller Gudbinta Rail Motor Circuit 2-jidka isku xira Pin A
  6. Isbarbardhigga reading(s).
    • Haddii reading(s) waa kala duwan, tag Tallaabada 9.
    • Haddii reading(s) waa out of kala duwan, badalo X-Y Shifter. Tag Tallaabada 13.

STEP 9. Hubi oo FMI set.

  1. Go'aanso oo FMI set for Babaca Code 61.
    • Haddii FMI 1 set, bedeli Gudbinta la habeeyo. Tag Tallaabada 13.
    • Haddii FMI 5 set, bedeli Gudbinta la habeeyo. Tag Tallaabada 13.
    • Haddii FMI 12 set, tag Tallaabada 10.

STEP 10. Shuban Test korontada gaariga si TECU ah.

  1. Key off.
  2. Hubi awood batari TECU iyo sahayda dhulka ka Vehicle OEM ee la habeeyo xiran yahay si sax ah oo aan mirdheen, dhaawacan ama dabacsan.
  3. Goostay 38-Jidka Vehicle la habeeyo isku xira garoonka TECU ah.
  4. Hubi in xira 38-Jidka waa ka xor daxalka; boosteejada waa wada xodan yihiin ma, faafidda, ama dabacsan; oo waxaa jira waxyeello u lahayn in ay jidhka isku xira ee.
  5. Load tijaabiyo gaariga Power Supply la habeeyo oo la il dibadeed ah load. Use a sealed beam headlamp or blower motor attached to Pin 35 (xoog) iyo Pin 37 (dhulka). imtixaanka Load waayo, 5 daqiiqo si loo xaqiijiyo xambaarka load a qaadi doonaa fiyuuska 30-amp ku rakiban.Eaton Fuller Gudbinta Power Supply la habeeyo
  6. Oynayo suunka lagu jiro Test Load ka baytariyada baabuurta si TECU ah ee.
    • Haddii arrimaha waxaa la helay iyada oo la habeeyo Vehicle ama Xidhiidhiyayaasha, tixraac xeerarka OEM dayactirka ama bedelida taararka OEM iyo sii Test Load.
    • Haddii la habeeyo Vehicle ma qaadi load a, tixraac xeerarka OEM dayactirka ama bedelida taararka OEM. Tag Tallaabada 13.
    • Haddii ay maya tahay arrimaha waxaa la helay iyada oo la habeeyo ku Vehicle ama Xidhiidhiyayaasha iyo korontada xambaartaa load a, bedeli TECU ah. Tag Tallaabada 13.

STEP 11. Hubi iska caabin ah oo sax ah iyada oo la habeeyo Gudbinta iyo Tareenka Motor.

  1. Key off.
  2. Goostay 38-Jidka Gudbinta la habeeyo isku xira ka TECU ah.
  3. Hubi in xira 38-Jidka waa ka xor daxalka, boosteejada aan xootay, faafidda, ama dabacsan; oo waxaa jira waxyeello u lahayn in ay jidhka isku xira ee.
  4. Cabir iska caabin ah oo u dhexeeya 38-Jidka isku xira Pin 35 iyo Pin 37. reading Record(s).Fuller Gudbinta la habeeyo oo Rail Motor imtixaanka iska caabin
  5. Cabir iska caabin ah oo u dhexeeya 38-Jidka isku xira Pin 35 iyo dhulka. Record readings. iska caabin ah oo sax ah iyada oo la habeeyo Gudbinta iyo imtixaanka Rail Motor waayo idaacadaha Eaton Fuller
  6. Isbarbardhigga reading duubay(s).
    • Haddii reading(s) waa kala duwan, badalo X-Y Shifter. Tag Tallaabada 13.
    • Haddii reading(s) waa out of kala duwan, tag Tallaabada 12.

STEP 12.Verify iska caabin gudaha oo ka mid ah X-Y Shifter Rail Motor iyo xaqiijiyo motor aan shorted dhulka ku.

  1. Key off.
  2. Goostay 38-Jidka Gudbinta la habeeyo isku xira ka la habeeyo Gudbinta ah.
  3. Hubi in isku xira 2-Jidka waa ka xor daxalka, boosteejada aan xootay, faafidda, ama dabacsan; oo waxaa jira waxyeello u lahayn in ay jidhka isku xira ee.
  4. Measure resistance between 2-Way Connector Pin A and Pin B. reading Record(s).Shifter Rail Motor iyo xaqiijiyo motor aan shorted in baaritaan dhulka
  5. Cabir iska caabin ah inta u dhaxaysa 2-jidka isku xira Pin A iyo dhulka. Record readings. Eaton Fuller Gudbinta Rail Motor Circuit 2-jidka isku xira Pin A
  6. Isbarbardhigga reading duubay(s).
    • Haddii reading(s) waa kala duwan, bedeli la habeeyo Gudbinta ah. Tag Tallaabada 13.
    • Haddii reading(s) waa out of kala duwan, badalo X-Y Shifter. Tag Tallaabada 13.

STEP 3. Hubi dayactirka.

  1. Key off.
  2. Xidhmaan oo dhan Xidhiidhiyayaasha iyo cable ka batari negative.
  3. Key on la off engine.
  4. codes Clear, arki Unu qabad la'aan Clear.
  5. Wado baabuur iyo isku dayaan in ay dib code ama nuqul arrinta.
  6. Hubi codes, arki View unu Active iyo Wax qabad la'aan.
    • Haddii codes ma, baaritaanka waa complete.
    • Haddii Code qalad 61 u muuqataa, heli qalad in imtixaanka, tag Tallaabada 1.
    • Haddii code kale oo aan ahayn 61 u muuqataa, arki Khalad List Code Index.

Qof kasta oo gudbinta qayb aad u baahan tahay aynu u leeyihiin! maalin isku mid ah maraakiibta la heli karo, dunida oo dhan.

U BAAHAN TAAGEERO FREE KA MID khubaro OUR?

WAC NOW
email US