Hybrid Eaton Fuller Gudbinta Babaca Code 58 – Sensor Speed ​​usheeda dhexe Output

Khalad code for Hybrid Eaton daydo Systems Drive (MY08) Cuneyso-8E306A-U, Cuneyso-8E306A-UPG, Cuneyso-8E306A-UP, Cuneyso-8E306A-CD, Cuneyso-8E306A-T, Cuneyso-6E606B-CD, (MY09) Cuneyso-8E406A-U / P, Cuneyso-8E406A-UP, Cuneyso-8E406A-UPG, Cuneyso-8E406A-CD, Cuneyso-8E406A-CDG, Cuneyso-8E406A-guud, Cuneyso-8E406A-T, Cuneyso-6E706B-CD, Cuneyso-6E706B-P iyo aad cuneyso-6E706B-UPG. Read hoose si aad u bartaan sida si ay u tijaabiso, nadiifiso iyo hagaajin qalad code qalad aad Freightliner, Mack, Peterbilt, Kenworth, Volvo, International, iyo gaari xamuul culus-waajib iyo qalabka. Sensor Speed ​​usheeda dhexe Output wuxuu ku yaalaa on daboolka dhalista danbe ee 12 SFIga oo meel. shidma waa dayacan ah oo magnetic in ay soo saartaa danab AC ah sida guuro ilkaha wheel midab la soo dhaafay dhammaadka shidma. at oo aan waxtar lahayn, ee wax soo saarka sensor Speed ​​waa yar yahay wuxuuna u kordhiyaa sida xawaaraha ah ee wax soo saarka usheeda dhexe kordhay.

khalad Code 58 – Output sensor Speed ​​usheeda dhexe Ogaanshaha

The shuruud soo socda waa in la buuxiyaa ka hor inta nidaamka ogaadaa gardarrada:

  • Unit Gudbinta Control Electronic (TECU) danab suuroggalaan waa ka weyn yahay 7 volts iyo ka yar 16 volts.
  • IMF 2 ma dhigay ma haddii ay jiraan horeba waa FMI ah Active 5 waayo, Input ama Output usheeda dhexe Speed ​​dareemayaal.

Note: Marka dhib code ah Wax qabad la'aan tixraac ah Product Baarista Mode (PDM)

Xaaladaha in Calan Babaca Code Active

  • IMF 2 ayaa lagu wadaa markii TECU xawaaraha usheeda dhexe saarka la barbar dhigo xawaaraha usheeda dhexe aqbasho oo soo saarta reading ah oo khilaafsan, waayo, 1 labaad ama ka weyn.
  • IMF 3, 4 ayaa lagu wadaa markii TECU ku ogaadaa gaaban dhulka, gaaban oo batari, ama xawaare usheeda dhexe wax soo saarka waa 0 waayo, 1 labaad ama ka weyn.
  • IMF 5 ayaa lagu wadaa markii TECU ku ogaadaa circuit furan iyo Output ku sensor Speed ​​qodaa waa 0 waayo, 1 labaad ama ka weyn.

Uugu Marka Babaca Code 58 ayaa lagu wadaa shuruudaha soo socda dhici:

  • Red "Service" illuminates iftiinka iyo dareenka gubashada ah "F" soo bandhigay marsho ah.
  • Gaf waxa lagu kaydiyaa xasuusta TECU.
  • mode Operation badala in "AutoShift uugu" mode.
  • Haddii qalad ay taasi dhacdo inta uusan u dhaqaaqin, gudbinta ayaa weli ku jira marsho hadda iyo xajin furo markii gaariga joojiyo.

Xaaladaha in Calan Babaca Code qabad la'aan

Kaliya unu qabad la'aan la nadiifiyay karaa Unit Gudbinta Electronic Control ah (TECU) ama taariikhda HCM isticmaalaya ServiceRanger. TECU ayaa si toos ah oo ansixiyay unu ka dib markii taariikhda 200 saacadood iyo HCM si toos ah oo ansixiyay unu ka soo taariikhda ka dib qalad uu Wax qabad la'aan, waayo, 200 saacadood.

code qalad Tani waxaa keeni kara wax ka mid ah kuwan soo socda:

  • IMF 2
    • Sensor Speed ​​usheeda dhexe Output
    • TECU
    • gudbinta la habeeyo
    • Waxyeello Gudbinta hadalhayaan
    • Wasaqda on Output ku sensor Speed ​​usheeda dhexe
  • IMF 3, 4, 5
    • Sensor Speed ​​usheeda dhexe Output
    • TECU
    • gudbinta la habeeyo

khalad Code 58 – Imtixaanka Output sensor Speed ​​usheeda dhexe

Aqoonsiga Qeybta:

Harness Front View TECU - Vehicle Interface Connector for Fuller transmission

La habeeyo Front View
(TECU – System Wajahadda isku xira)

Output Shaft Speed Sensor

Sensor Speed ​​usheeda dhexe Output

FIIRO GAAR AH: U dir ka Eaton Qeybta Hybrid oo isku xira Location waayo, Goobaha isku xira in Systems MY08

FIIRO GAAR AH: U dir ka Eaton Qeybta Hybrid oo isku xira Location waayo, Goobaha isku xira in Systems MY09.

TECU Output Shaft Speed Sensor connector location Eaton Fuller transmission

STEP 1. Hubi sii wareeggeedii shidma Gudbinta la habeeyo.

  1. Ceshano codes qalad Active iyo FMIs la ServiceRanger isticmaalaya Baarista 9-Jidka isku xira.
  2. Key off.
  3. Goostay cable batari negative.
  4. Disconnect the Transmission Harness 38- isku xira Jidka.
  5. Cabir iska caabin ah oo u dhexeeya isku xira Gudbinta la habeeyo 38-Jidka Pin 23 iyo Pin 24 iyo Pin 23 iyo dhulka:
    • Haddii iska caabin ah waa ohms 2k-4.5K iyo Pin 23 si ay dhulka waa 10km ohms ama ka weyn, tag Tallaabada 2.
    • Haddii iska caabin ah ka baxsan ee kala duwan ee, tag Tallaabada 4.

STEP 2. Hubi danab ee wareeggeedii shidma Gudbinta lagaga dhulka.

  1. Key on.
  2. danab Cabbirka u dhexeeya isku xira Gudbinta la habeeyo 38-Jidka Pin 23 iyo dhulka.
    • Haddii danab waa 0 volts, tag Tallaabada 3.
    • Haddii danab waa 11-13 volts, cusboonaysiiyo gaaban si batteriga in la habeeyo Vehicle ah, ka dibna tag Tallaabada 6.

STEP 3. Hubi daacad ah sensor Speed ​​usheeda dhexe Output.

  1. Kormeer sensor Speed ​​usheeda dhexe Output for faddarayn ama dhaawac.
    • Haddii dhibaato ah ma helay, bedeli Unit Gudbinta Electronic Control (TECU) (oo kaliya haddii code qalad waa Active), ka dibna tag Tallaabada 6.
    • Haddii dhibaato la helay ama halkan ka Step diray 4 ama 5, bedeli sensor Speed ​​usheeda dhexe Output iyo kormeerto Wheel Tone burburka ah, jilicsanaanta ama daxalka. Tag Tallaabada 6.

STEP 4. Hubi sii sensor Speed ​​usheeda dhexe Output.

  1. Barkinta la habeeyo Gudbinta ka Output ku sensor Speed ​​usheeda dhexe.
  2. Measure resistance between Output Shaft Speed Sensor Pin A and Pin B:
    • Haddii iska caabin ah waa 2k-4.5K ohms, tag Tallaabada 5.
    • Haddii iska caabin ah ka baxsan ee kala duwan, tag Tallaabada 3.

STEP 5. Hubi sii sensor Speed ​​Output usheeda dhexe iyo dhulka.

  1. Cabir iska caabin ah oo u dhexeeya Output usheeda dhexe Speed ​​sensor Pin A iyo dhulka:
    • Haddii iska caabin ah waa 10km ohms ama ka weyn, bedeli la habeeyo Gudbinta ah, ka dibna tag Tallaabada 6.
    • Haddii iska caabin yar yahay 10km ohms, tag Tallaabada 3.

STEP 6. Hubi dayactirka.

  1. Key off.
  2. Xidhmaan oo dhan Xidhiidhiyayaasha iyo cable ka batari negative.
  3. Hubi rakibo habboon ee sensor Speed.
  4. Key on.
  5. codes Clear, arki Unu qabad la'aan Clear.
  6. Wado baabuur iyo isku dayaan in ay dib code ka.
  7. Hubi codes, arki View unu Active iyo Wax qabad la'aan.
    • Haddii codes ma, baaritaanka waa complete.
    • Haddii Code qalad 58 u muuqataa, heli qalad in imtixaanka, tag Tallaabada 1.
    • Haddii code kale oo aan ahayn 58 u muuqataa, arki Khalad List Code Index.

Qof kasta oo gudbinta qayb aad u baahan tahay aynu u leeyihiin! maalin isku mid ah maraakiibta la heli karo, dunida oo dhan.

U BAAHAN TAAGEERO FREE KA MID khubaro OUR?

WAC NOW
email US