Hybrid Eaton Fuller Gudbinta Babaca Code 56 – Sensor Speed ​​usheeda dhexe Input

Khalad code for Hybrid Eaton daydo Systems Drive (MY08) Cuneyso-8E306A-U, Cuneyso-8E306A-UPG, Cuneyso-8E306A-UP, Cuneyso-8E306A-CD, Cuneyso-8E306A-T, Cuneyso-6E606B-CD, (MY09) Cuneyso-8E406A-U / P, Cuneyso-8E406A-UP, Cuneyso-8E406A-UPG, Cuneyso-8E406A-CD, Cuneyso-8E406A-CDG, Cuneyso-8E406A-guud, Cuneyso-8E406A-T, Cuneyso-6E706B-CD, Cuneyso-6E706B-P iyo aad cuneyso-6E706B-UPG. Read hoose si aad u bartaan sida si ay u tijaabiso, nadiifiso iyo hagaajin qalad code qalad aad Freightliner, Mack, Peterbilt, Kenworth, Volvo oo gaari International. Sensor Speed ​​usheeda dhexe Input wuxuu ku yaalaa on Cover 6-bool PTO ah, taas oo ah heerka dhankiisa midig ee xagga gudbinta. shidma waa dayacan ah oo magnetic in ay soo saartaa danab AC ah sida qalabka countershaft ilkaha u dhaqaaqdo la soo dhaafay dhammaadka shidma. At oo aan waxtar lahayn wax soo saarka shidma xawaaraha ay yar tahay oo kor u sida xawaaraha countershaft korodho.

khalad Code 56 – Input sensor Speed ​​usheeda dhexe Ogaanshaha

The shuruud soo socda waa in la buuxiyaa ka hor inta nidaamka ogaadaa gardarrada:

  • Unit Gudbinta Control Electronic (TECU) danab suuroggalaan waa ka weyn yahay 7 volts iyo ka yar 16 volts.
  • IMF 10 waxay u baahan tahay gudbinta inay ku dhex-dhexaad ah iyo xawaaraha gaariga waa in ay ahaadaan gudahood kala duwan.
  • IMF 2 ma dhigay ma haddii ay jiraan horeba waa FMI ah Active 5 waayo, Input ama Output usheeda dhexe Speed ​​dareemayaal.

Note: Marka dhib code ah Wax qabad la'aan tixraac ah Product Baarista Mode (PDM)

Xaaladaha in Calan Babaca Code Active

  • IMF 2 ayaa lagu wadaa markii TECU xawaaraha usheeda dhexe talooyin la barbar dhigo xawaaraha usheeda dhexe wax soo saarka iyo waxa soo saara akhris ah oo khilaafsan, waayo, 1 labaad ama ka weyn.
  • IMF 3 iyo 4 ayaa lagu wadaa markii TECU ku ogaadaa gaaban dhulka, gaaban oo batari, iyo xawaaraha usheeda dhexe aqbasho waa 0 waayo, 1 labaad ama ka weyn.
  • IMF 5 ayaa lagu wadaa markii TECU ku ogaadaa circuit furan iyo Input ku sensor Speed ​​qodaa waa 0 waayo, 1 labaad ama ka weyn.
  • IMF 10 ayaa lagu wadaa markii TECU ku ogaadaa a 200 RPM ama xawaaraha weyn farqiga u dhexeeya xawaaraha usheeda dhexe talooyin iyo xawaaraha usheeda dhexe aqbasho sida xawliga ah u 10 Ms ama ka weyn.

Uugu Marka Babaca Code 56 ayaa lagu wadaa shuruudaha soo socda dhici:

  • Red "Service" illuminates iftiinka iyo dareenka gubashada ah "F" soo bandhigay marsho ah.
  • Gaf waxa lagu kaydiyaa xasuusta TECU.
  • mode Hawlgalka ayaa badala in "AutoShift uugu" mode.
  • Haddii qalad ay taasi dhacdo inta uusan u dhaqaaqin, gudbinta ayaa weli ku jira marsho hadda iyo xajin furo markii gaariga joojiyo.
  • Haddii qalad ay taasi dhacdo ee kor xoog, gaariga cranks laakiin gudbinta ma galaan marsho ah.

Xaaladaha in Calan Babaca Code qabad la'aan

Kaliya unu qabad la'aan la nadiifiyay karaa Unit Gudbinta Electronic Control ah (TECU) ama taariikhda HCM isticmaalaya ServiceRanger. TECU ayaa si toos ah oo ansixiyay unu ka dib markii taariikhda 200 saacadood iyo HCM si toos ah oo ansixiyay unu ka soo taariikhda ka dib qalad uu Wax qabad la'aan, waayo, 200 saacadood.

code qalad Tani waxaa keeni kara wax ka mid ah kuwan soo socda:

  • IMF 2, 10
    • Sensor Speed ​​usheeda dhexe Input
    • TECU
    • gudbinta la habeeyo
    • Waxyeello ay hadalhayaan gudbinta
    • Wasaqda on sensor Speed ​​qodaa Input
  • IMF 3, 4, 5
    • Sensor Speed ​​usheeda dhexe Input
    • TECU
    • gudbinta la habeeyo

khalad Code 56 – Imtixaanka Input sensor Speed ​​usheeda dhexe

Aqoonsiga Qeybta:

Fuller Transmission Harness Front View TECU - Vehicle Interface Connector

La habeeyo Front View
(TECU – System Wajahadda isku xira)

Fuller transmission Deutsch 4-way OEM connector

Sensor Speed ​​usheeda dhexe Input
(Connect View)

FIIRO GAAR AH: U dir ka Eaton Qeybta Hybrid oo isku xira Location waayo, Goobaha isku xira in Systems MY08

FIIRO GAAR AH: U dir ka Eaton Qeybta Hybrid oo isku xira Location waayo, Goobaha isku xira in Systems MY09.

Eaton Fuller Transmission TECU Input Shaft Speed Sensor Connector Location

STEP 1. Hubi sii wareeggeedii shidma Gudbinta la habeeyo.

  1. Ceshano codes qalad Active iyo FMIs la ServiceRanger isticmaalaya Baarista 9-Jidka isku xira.
  2. Key off.
  3. Goostay cable batari negative.
  4. Disconnect the Transmission Harness 38- isku xira Jidka.
  5. Cabir iska caabin ah u dhexeeya isku xira Gudbinta la habeeyo 38-Jidka Pin 7 iyo Pin 8 iyo Pin 7 iyo dhulka.
    • Haddii iska caabin ah waa ohms 2k-4.5K iyo Pin 7 si ay dhulka waa 10km ohms ama ka weyn, tag Tallaabada 2.
    • Haddii iska caabin ah ka baxsan ee kala duwan ee, tag Tallaabada 4.

STEP 2. Hubi voltages of wareeggeedii shidma Gudbinta la habeeyo iyo dhulka.

  1. Key on.
  2. Cabir danab ka dhexeeya isku xira Gudbinta la habeeyo 38-Jidka Pin 7 iyo dhulka.
    • Haddii danab waa 0 volts, tag Tallaabada 3.
    • Haddii danab waa 11-13 volts, cusboonaysiiyo gaaban si batteriga in la habeeyo Vehicle ah, ka dibna tag Tallaabada 6.

STEP 3. Hubi daacad ah sensor Speed ​​usheeda dhexe Input.

  1. Kormeer sensor Speed ​​usheeda dhexe Input for faddarayn ama dhaawac:
    • Haddii dhibaato ah ma helay, bedeli Unit Gudbinta Electronic Control (TECU) (Oo kaliya haddii Babaca Code waa Active), ka dibna tag Tallaabada 6.
    • Haddii dhibaato la helay ama halkan ka Step diray 4 ama Step 5, bedeli sensor Speed ​​usheeda dhexe Input iyo kormeerto Gear Countershaft ee dhaawac. Tag Tallaabada 6.

STEP 4. Hubi sii sensor Speed ​​usheeda dhexe Input.

  1. Barkinta la habeeyo Gudbinta ka sensor Speed ​​usheeda dhexe Input.
  2. Cabir iska caabin ah oo u dhexeeya Input usheeda dhexe sensor Speed ​​Pin A iyo B Pin:
    • Haddii iska caabin ah waa 2k-4.5K ohms, tag Tallaabada 5.
    • Haddii iska caabin ah ka baxsan ee kala duwan, tag Tallaabada 3.

STEP 5. Hubi sii sensor Speed ​​usheeda dhexe Input dhulka.

  1. Cabir iska caabin ah oo u dhexeeya Input usheeda dhexe Speed ​​sensor Pin A iyo dhulka:
    • Haddii iska caabin ah waa 10km ohms ama ka weyn, bedeli la habeeyo Gudbinta ah, ka dibna tag Tallaabada 6.
    • Haddii iska caabin yar yahay 10km ohms, tag Tallaabada 3.

STEP 6. Hubi Repair.

  1. Key off.
  2. Dib isugu xir dhammaan xiriiriyeyaasha iyo xarkaha batteriga taban.
  3. Hubi rakibo saxda ah ee xawaaraha shidma.
  4. Key on.
  5. codes Clear, arki Unu qabad la'aan Clear.
  6. Wado baabuur iyo isku dayaan in ay dib code ka.
  7. Hubi codes, arki View unu Active iyo Wax qabad la'aan.
    • Haddii codes ma, baaritaanka waa complete.
    • Haddii Code qalad 56 u muuqataa, heli qalad in imtixaanka, tag Tallaabada 1.
    • Haddii code kale oo aan ahayn 56 u muuqataa, arki Khalad List Code Index.

Qof kasta oo gudbinta qayb aad u baahan tahay aynu u leeyihiin! maalin isku mid ah maraakiibta la heli karo, dunida oo dhan.

U BAAHAN TAAGEERO FREE KA MID khubaro OUR?

WAC NOW
email US