Hybrid Eaton Fuller Gudbinta Babaca Code 40 – Qaboojinta saar Relay

Khalad code for Hybrid Eaton daydo Systems Drive (MY08) Cuneyso-8E306A-U, Cuneyso-8E306A-UPG, Cuneyso-8E306A-UP, Cuneyso-8E306A-CD, Cuneyso-8E306A-T, Cuneyso-6E606B-CD, (MY09) Cuneyso-8E406A-U / P, Cuneyso-8E406A-UP, Cuneyso-8E406A-UPG, Cuneyso-8E406A-CD, Cuneyso-8E406A-CDG, Cuneyso-8E406A-guud, Cuneyso-8E406A-T, Cuneyso-6E706B-CD, Cuneyso-6E706B-P iyo aad cuneyso-6E706B-UPG. Read hoose si aad u bartaan sida si ay u tijaabiso, nadiifiso iyo hagaajin qalad code qalad aad Freightliner, Mack, Peterbilt, Kenworth, Volvo oo gaari International. The qaboojinta saar Relay waa Relay furan ku xiran Control Module ku Hybrid (Gudiga sare) dhinaca ay gacanta ku. Marka awoodaha Gudiga sare ee circuit gacanta, waxa ay xirtey xiriirada Relay iyo jirsado on Relay ah. The qaboojinta awoodaha saar Relay bamka qaboojinta in wareegtaa coolant ku saabsan nidaamka dareeraha hybrid.

khalad Code 40 – Cooling Pump Relay Detection

The shuruud soo socda waa in la buuxiyaa ka hor inta nidaamka ogaadaa gardarrada:

  • Gudiga sare danab suuroggalaan waa ka weyn yahay 7 volts iyo ka yar 16 volts.

Note: Marka dhib code ah Wax qabad la'aan tixraac ah Product Baarista Mode (PDM)

Xaaladaha in Calan Babaca Code Active

  • IMF 3 is set when the HCM detects a short to battery in the coil circuit of the Cooling Pump Relay.
  • IMF 4 is set when the HCM detects a short to ground in the coil circuit of the Cooling Pump Relay.
  • IMF 5 ayaa lagu wadaa markii Gudiga sare ee ogaadaa furan wareegi gariiradda ah Qaboojinta saar Relay ah.
  • IMF 14 ayaa lagu wadaa marka soo socda dhacaan 10 daqiiqo ama ka badan:
    • heerkulka Inverter waa ka weyn yahay 122 ° F (50 ° C)
    • Farqiga u dhexeeya heerkulka batari ugu badnaan iyo heerkulka Inverter ka wada weyn yahay 68 ° F (20 ° C)
    • No heerkulka batari ama motor unu heerkulka

Uugu Marka Babaca Code 40 ayaa lagu wadaa shuruudaha soo socda dhici:

  • Amber "Check Hybrid" illuminates light.
  • Gaf waxa lagu kaydiyaa Control Module Hybrid (Gudiga sare) xusuusta.

Xaaladaha in Calan Babaca Code qabad la'aan

Kaliya unu qabad la'aan la nadiifiyay karaa Unit Gudbinta Electronic Control ah (TECU) ama taariikhda HCM isticmaalaya ServiceRanger. TECU ayaa si toos ah oo ansixiyay unu ka dib markii taariikhda 200 saacadood iyo HCM si toos ah oo ansixiyay unu ka soo taariikhda ka dib qalad uu Wax qabad la'aan, waayo, 200 saacadood.

code qalad Tani waxaa keeni kara wax ka mid ah kuwan soo socda:

  • IMF 3, 4, 5
    • Vehicle Harness from HCM to Cooling Pump Relay
    • Qaboojinta saar Relay
    • Gudiga sare
  • IMF 14
    • Qaboojinta saar Relay
    • saar qaboojinta
    • Qaboojinta saar Relay korontada ugu weyn
    • coolant Low, socodka coolant Low, hiitarka shidan, taageere hawlgalka

khalad Code 40 – Cooling Pump Relay Test

Aqoonsiga Qeybta:

Harness Front View HCM - Hybrid System Interface Connector

La habeeyo Front View
Gudiga sare – Hybrid System Wajahadda isku xira

Relay switch

sensor heerkulka
(la habeeyo View – Side Front)

FIIRO GAAR AH: U dir ka Eaton Qeybta Hybrid oo isku xira Location waayo, Goobaha isku xira in Systems MY08

FIIRO GAAR AH: U dir ka Eaton Qeybta Hybrid oo isku xira Location waayo, Goobaha isku xira in Systems MY09.

Eaton Fuller HCM Coolant Pump Connectors

STEP 1. Hubi xaaladda code qalad Active ama qabad la'aan.

  1. Dib u eeg oo raaca digniinaha & ganaaxyada.
  2. Ceshano codes qalad Active iyo FMIs la ServiceRanger isticmaalaya Baarista 9-Jidka isku xira.
  3. Key off.
  4. Disconnect the Temperature Sensor Connector at the Motor/Generator.
    Danger: Eeg High-Voltage Service Shutdown and Power-Up Procedures. Raac habraaca si looga fogaado filaan ah, gubaan ama dhimasho ka khaldan u maareeyeen a high-voltage.
  5. Exchange qaboojinta saar Relay la Relay kale oo fiiriya hadday eed celinta:
    • Haddii eed ma leh Relay cusub kuma ay soo noqon, badalo qaboojinta saar Relay, ka dibna tag Tallaabada 9.
    • Haddii qalad Laabtay la Relay cusub, tag Tallaabada 2.

STEP 2. Hubi joogo FMI.

  1. Waa kuwee FMIs ayaa ku qoran oo ka Step 1?
    Note: The Relay bamka qaboojinta waa in la banki oo waafaqsan shuruudaha Eaton® (muujiyey bogga hore) imtixaanka si fiican u shaqaynayn. Haddii banki ayaa si ka duwan, la tasho OEM for schematic taararka saxda ah.

    • Haddii FMI 5 waxaa ku qoran, tag Tallaabada 3.
    • Haddii FMI 3 waxaa ku qoran, tag Tallaabada 4.
    • Haddii FMI 4 waxaa ku qoran, tag Tallaabada 5.
    • Haddii FMI 14 waxaa ku qoran, tag Tallaabada 6.

STEP 3. Hubi sii wareeggeedii HCM la habeeyo.

  1. Key off.
  2. Goostay cable batari negative.
  3. Barkinta la habeeyo Gudiga sare ee 38-Jidka isku xira.
  4. Measure the resistance between the HCM Harness 38- Jidka isku xira Pin 32 iyo Pin 4.
    • Haddii iska caabin ah oo u dhexeeya Pin 32 iyo Pin 4 waa 40-120 ohms, bedeli Control Module Hybrid (Gudiga sare) (oo kaliya haddii code qalad waa Active), ka dibna tag Tallaabada 9.
    • Haddii iska caabin ah ka baxsan ee kala duwan, cusboonaysiiyo la habeeyo Vehicle ee wareeg furan, ka dibna tag Tallaabada 9.

STEP 4. Hubi voltages of wareeggeedii HCM lagaga dhulka.

  1. Key on.
  2. danab Cabbirka u dhexeeya Gudiga la habeeyo 38-Jidka isku xira Pin 32 iyo dhulka ee muhiimka ah oo ku saabsan.
    • Haddii danab dhexeeya Pin 32 iyo dhulka waa 0 volts, bedeli Control Module ku Hybrid (Gudiga sare) (oo kaliya haddii code qalad waa Active), ka dibna tag Tallaabada 9.
    • Haddii danab dhexeeya Pin 32 iyo dhulka waa 12 volts, cusboonaysiiyo gaaban si VBATT on xambaarka, ka dibna tag Tallaabada 9.

STEP 5. Hubi sii wareeggeedii HCM lagaga dhulka.

  1. Key off.
  2. Goostay cable batari negative.
  3. Disconnect the HCM System Harness 38- isku xira Jidka.
  4. Cabir iska caabin ka dhexeeya System HCM la habeeyo 38-Jidka isku xira musmaarradii 32 iyo dhulka:
    • Haddii iska caabin ah oo u dhexeeya Pin 32 iyo dhulka waa 10km ohms ama ka weyn, bedeli Control Module ku Hybrid (Gudiga sare) (oo kaliya haddii code qalad waa Active), ka dibna tag Tallaabada 9.
    • Haddii iska caabin ah ka baxsan ee kala duwan, cusboonaysiiyo la habeeyo Vehicle ee gaaban dhulka, ka dibna tag Tallaabada 9.

STEP 6. Hubi heerka coolant System Hybrid.

  1. Key off.
  2. Note the level of the coolant in the Hybrid Liquid Cooling System:
    • Haddii coolant waa xadka lagu taliyay, tag Tallaabada 7.
    • Haddii coolant waa hoos xadka lagu taliyay, tixraac OEM nooca coolant iyo nidaamka ka dheregtaan. Tag Tallaabada 9.

STEP 7. Hubi hawlgalka System Hybrid saar Coolant.

  1. Key off.
  2. Connect ServiceRanger in Baarista 9-Jidka isku xira in cab ah.
  3. Key on.
  4. Dooro doorashooyinka soo socda ee ServiceRanger:
    "Hawlaha Product Advanced,"" Control Hybrid Module,"Iyo" Launch ay kaleeyihiin. "
  5. Go to “Product Tests” and select “Coolant Pump Relay.”
  6. Dhageyso saar Coolant in ay ku soo noqdaan oo ay u daawadaan socodka coolant in kaydka.
    • Haddii saar Coolant ka waddaa la coolant iyada oo kaydka dhaqaaqin, iyo Code Babaca waa Active, la xiriir Eaton® at 1-800-826-4357.
    • Haddii saar Coolant ma ordi, tag Tallaabada 8.
    • Haddii saar Coolant waxay kuorodaa iyo coolant aanu uma ay soo qulquli, hubiyo laalaab ama qallooca af khadadka coolant ah. Haddii okay, la xiriir OEM for walaac bamka Coolant.

STEP 8. Hubi voltages at System Hybrid saar Coolant.

  1. Key on.
  2. Disconnect the 2-Way Connector at the Coolant Pump.
  3. danab Cabbirka at 2-jidka isku xira ka Pin A si Pin B.
    • Haddii danab dhexeeya Pin A iyo B Pin waa ± 0.2 volts ee danab batari, tixraac OEM dhibaatada saar Coolant.
    • Haddii danab dhexeeya Pin A iyo B Pin waa ka baxsan kala duwan, dayactirka taararka ama dhibaato Relay. U dir ka OEM.

STEP 9. Hubi dayactirka.

  1. Key off.
  2. Dib isugu xir dhammaan xiriiriyeyaasha iyo xarkaha batteriga taban.
  3. Key on.
  4. codes Clear, arki Unu qabad la'aan Clear.
  5. Wado baabuur iyo isku dayaan in ay dib code ka.
  6. Hubi codes, arki View unu Active iyo Wax qabad la'aan.
    • Haddii codes ma, baaritaanka waa complete.
    • Haddii Code qalad 40 u muuqataa, heli qalad in imtixaanka, tag Tallaabada 1.
    • Haddii code kale oo aan ahayn 40 u muuqataa, arki Khalad List Code Index.

Qof kasta oo gudbinta qayb aad u baahan tahay aynu u leeyihiin! maalin isku mid ah maraakiibta la heli karo, dunida oo dhan.

U BAAHAN TAAGEERO FREE KA MID khubaro OUR?

WAC NOW
email US