Hybrid Eaton Fuller Gudbinta Babaca Code 39 Heat Iskubedelka Relay

Khalad code for Hybrid Eaton daydo Systems Drive (MY08) Cuneyso-8E306A-U, Cuneyso-8E306A-UPG, Cuneyso-8E306A-UP, Cuneyso-8E306A-CD, Cuneyso-8E306A-T, Cuneyso-6E606B-CD, (MY09) Cuneyso-8E406A-U / P, Cuneyso-8E406A-UP, Cuneyso-8E406A-UPG, Cuneyso-8E406A-CD, Cuneyso-8E406A-CDG, Cuneyso-8E406A-guud, Cuneyso-8E406A-T, Cuneyso-6E706B-CD, Cuneyso-6E706B-P iyo aad cuneyso-6E706B-UPG. The Heat Iskubedelka Fan Relay waa Relay furan ku xiran Control Module ku Hybrid (Gudiga sare) dhinaca ay gacanta ku.
Marka HCM jirsado on Relay ah, waxaa awoodaha circuit gacanta, ku dhow xiriirada Relay ah. Awoodaha Heat Exchange Fan Relay Iskubedelka Heat ee Fan yaal dareere nidaamka qaboojinta hiitarka hybrid. taageere waxay bixisaa hawada dheeraad ah xaaladaha qaarkood sida driving gaabis ah ama hawlgal ePTO.

khalad Code 39 – Heat Iskubedelka Relay Ogaanshaha

The shuruud soo socda waa in la buuxiyaa ka hor inta nidaamka ogaadaa gardarrada:

  • Gudiga sare danab suuroggalaan waa ka weyn yahay 7 volts iyo ka yar 16 volts.

Note: Marka dhib code ah Wax qabad la'aan tixraac ah Product Baarista Mode (PDM)

Xaaladaha in Calan Babaca Code Active

  • IMF 3 ayaa lagu wadaa markii Gudiga sare ee ogaadaa gaaban si batteriga ee circuit gariiradda ah Heat Iskubedelka Fan Relay ah.
  • IMF 4 ayaa lagu wadaa markii Gudiga sare ee ogaadaa gaaban dhulka wareegi gariiradda ah Heat Iskubedelka Fan Relay ah.
  • IMF 5 ayaa lagu wadaa markii Gudiga sare ee ogaadaa furan wareegi gariiradda ah Heat Iskubedelka Fan Relay ah.

Uugu Marka Babaca Code 39 ayaa lagu wadaa shuruudaha soo socda dhici:
• Amber "Check Hybrid" illuminates light.
• Babaca waxa lagu kaydiyaa Control Module Hybrid (Gudiga sare) xusuusta.

Xaaladaha in Calan Babaca Code qabad la'aan

Kaliya unu qabad la'aan la nadiifiyay karaa Unit Gudbinta Electronic Control ah (TECU) ama taariikhda HCM isticmaalaya ServiceRanger. TECU ayaa si toos ah oo ansixiyay unu ka dib markii taariikhda 200 saacadood iyo HCM si toos ah oo ansixiyay unu ka soo taariikhda ka dib qalad uu Wax qabad la'aan, waayo, 200 saacadood.

code qalad Tani waxaa keeni kara wax ka mid ah kuwan soo socda:

  • IMF 3, 4, 5
    • Vehicle foomka suunka HCM si Kuleyli Iskubedelka Relay
    • Heat Iskubedelka Relay
    • Gudiga sare
    • Heat Iskubedelka Relay fiyuuska

khalad Code 39 – Tijaabada Relay Bedelka Kuleylka Heat

Aqoonsiga Qeybta:

Harness Front View HCM - Hybrid System Interface Connector

La habeeyo Front View
(Gudiga sare – Hybrid System Wajahadda isku xira)

Relay Switch

Switch Relay caadiga ah

FIIRO GAAR AH: U dir ka Eaton Qeybta Hybrid oo isku xira Location waayo, Goobaha isku xira in Systems MY08

FIIRO GAAR AH: U dir ka Eaton Qeybta Hybrid oo isku xira Location waayo, Goobaha isku xira in Systems MY09.

Fuller HCM Heat Exchanger connections

STEP 1. Hubi xaaladda code qalad Active ama qabad la'aan.

  1. Ceshano codes qalad Active iyo FMIs la ServiceRanger isticmaalaya Baarista 9-Jidka isku xira.
  2. 2. Exchange Heat Iskubedelka Fan Relay la Relay kale oo fiiriya hadday eed ku soo laabtay:
    • Haddii eed ma leh Relay cusub kuma ay soo noqon, badalo Relay Heat Iskubedelka Fan, ka dibna tag Tallaabada 7.
    • Haddii qalad Laabtay la Relay cusub, tag Tallaabada 2.

STEP 2. Hubi qaabeynta of HCM.

  1. Key on.
  2. Connect ServiceRanger in 9-Jidka isku xira Baarista.
  3. Xulo menu “Configurations” oo dooro “Xulka Xakamaynta Muuqaalka”.
  4. Ma jiraan ikhtiyaar u Heat Iskubedelka Fan?
    • Doorashada Heat Iskubedelka Fan lagu muujiyay iyo gaari uu leeyahay Hybrid ah Qaboojinta System Heat Iskubedelka Fan rakibay. Tag Tallaabada 3.
    • Doorashada Heat Iskubedelka Fan lagu muujiyay iyo gaariga uusan haysan Hybrid ah Qaboojinta System Heat Iskubedelka Fan rakibay, Waxaad ku qortaa Moodel Moodel ah Isugeynta La Xiriirka oo xiriir kala xiriir Eaton at 1- 800-826-I CAAWI (4357).

STEP 3. Hubi joogo FMIs.

  1. Waa kuwee FMIs ayaa ku qoran oo ka Step 1?
    Note: Relay Iskubedelka kulaylka waa in la banki oo waafaqsan shuruudaha Eaton imtixaanka si fiican u shaqaynayn. Haddii banki ayaa si ka duwan tasho OEM for schematic taararka saxda ah.

    • Haddii FMI 5 waxaa ku qoran, tag Tallaabada 4.
    • Haddii FMI 3 waxaa ku qoran, tag Tallaabada 5.
    • Haddii FMI 4 waxaa ku qoran, tag Step6.

STEP 4. Hubi sii wareeggeedii HCM la habeeyo.

  1. Key off.
  2. Goostay cable batari negative.
  3. Barkinta la habeeyo Gudiga sare ee 38-Jidka isku xira.
  4. Cabbir iska caabinta udhaxeysa Xarigga HCM 38- Jidka isku xira Pin 35 iyo Pin 37.
    • Haddii iska caabin ah oo u dhexeeya musmaarradii 35 iyo 37 waa 40-120 ohms, bedeli Control Module ku Hybrid (Gudiga sare) (oo kaliya haddii code qalad waa Active), ka dibna tag Tallaabada 7.
    • Haddii iska caabin ah ka baxsan ee kala duwan, cusboonaysiiyo la habeeyo Vehicle ee wareeg furan ama fiyuus Suurka, ka dibna tag Tallaabada 7.

STEP 5. Hubi voltages of wareeggeedii HCM lagaga dhulka.

  1. Key on.
  2. Cabir danab u dhexeeya System HCM la habeeyo 38-Jidka isku xira Pin 35 iyo dhulka.
    • Haddii danab dhexeeya Pin 35 iyo dhulka waa 0 volts, bedeli Control Module ku Hybrid (Gudiga sare) (oo kaliya haddii code qalad waa Active), ka dibna tag Tallaabada 7.
    • Haddii danab dhexeeya Pin 35 iyo dhulka waa 12 volts, cusboonaysiiyo gaaban si VBATT on xambaarka, ka dibna tag Tallaabada 7.

STEP 6. Hubi sii wareeggeedii HCM lagaga dhulka.

  1. Key off.
  2. Goostay cable batari negative.
  3. Barkinta la habeeyo Gudiga sare ee 38-Jidka isku xira.
  4. Cabbir iska caabinta udhaxeysa Nidaamka HCM Harness 38-Way Connector Pin 35 iyo dhulka.
    • Haddii iska caabin ah oo u dhexeeya Pin 35 iyo dhulka waa 10km ohms ama ka weyn, bedeli Control Module ku Hybrid (Gudiga sare) (oo kaliya haddii code qalad waa Active), ka dibna tag Tallaabada 7.
    • Haddii iska caabin ah ka baxsan ee kala duwan, cusboonaysiiyo la habeeyo Vehicle ee gaaban dhulka, ka dibna tag Tallaabada 7.

STEP 7. Hubi dayactirka.

  1. Key off.
  2. Dib isugu xir dhammaan xiriiriyeyaasha iyo xarkaha batteriga taban.
  3. Key on.
  4. codes Clear, arki Unu qabad la'aan Clear.
  5. Wado baabuur iyo isku dayaan in ay dib code ka.
  6. Hubi codes, arki View unu Active iyo Wax qabad la'aan.
    • Haddii codes ma, baaritaanka waa complete.
    • Haddii Code qalad 39 u muuqataa, heli qalad in imtixaanka, tag Tallaabada 1.
    • Haddii code kale oo aan ahayn 39 u muuqataa, arki Khalad List Code Index.

Qof kasta oo gudbinta qayb aad u baahan tahay aynu u leeyihiin! maalin isku mid ah maraakiibta la heli karo, dunida oo dhan.

U BAAHAN TAAGEERO FREE KA MID khubaro OUR?

WAC NOW
email US