Hybrid Eaton Fuller Gudbinta Babaca Code 38 – Battery Fan Relay

Khalad code for Hybrid Eaton daydo Systems Drive (MY08) Cuneyso-8E306A-U, Cuneyso-8E306A-UPG, Cuneyso-8E306A-UP, Cuneyso-8E306A-CD, Cuneyso-8E306A-T, Cuneyso-6E606B-CD, (MY09) Cuneyso-8E406A-U / P, Cuneyso-8E406A-UP, Cuneyso-8E406A-UPG, Cuneyso-8E406A-CD, Cuneyso-8E406A-CDG, Cuneyso-8E406A-guud, Cuneyso-8E406A-T, Cuneyso-6E706B-CD, Cuneyso-6E706B-P iyo aad cuneyso-6E706B-UPG. The Battery Fan Relay sida caadiga ah waa Relay furan ku xiran Control Module ku Hybrid (Gudiga sare) dhinaca ay gacanta ku. Marka awoodaha Gudiga sare ee circuit gacanta, waxa ay xirtey xiriirada Relay iyo jirsado on Relay ah. Awoodaha Battery Fan Relay Fan Battery ku yaalla Power Electronics Carrier ah (PEC), qaboojinta ah baytariyada a high-voltage.

khalad Code 38 – Battery Fan Relay Ogaanshaha

The shuruud soo socda waa in la buuxiyaa ka hor inta nidaamka ogaadaa gardarrada:

  • Gudiga sare danab suuroggalaan waa ka weyn yahay 7 volts iyo ka yar 16 volts.

Note: Marka dhib code ah Wax qabad la'aan tixraac ah Product Baarista Mode (PDM)

Xaaladaha in Calan Babaca Code Active

Xaaladaha in Calan Babaca:
• IMF 3 ayaa lagu wadaa markii danab shidma ka wada weyn yahay 4.1 volts waayo, 10 seconds, halka heerkulka Inverter ay ka badan tahay 35 ° C ama 95 ° F, ama haddii danab saarka shidma uu ka yar yahay 0.2 volts waayo, 10 seconds.

Uugu Marka Babaca Code 38 ayaa lagu wadaa shuruudaha soo socda dhici:

  • IMF 3 ayaa lagu wadaa markii Gudiga sare ee ogaadaa gaaban si batteriga ee circuit gariiradda ee Fan Battery ee Relay ah.
  • IMF 4 ayaa lagu wadaa markii Gudiga sare ee ogaadaa gaaban dhulka wareegi gariiradda ee Fan Battery ee Relay ah.
  • IMF 5 ayaa lagu wadaa markii Gudiga sare ee ogaadaa furan wareegi gariiradda ee Fan Battery ee Relay ah.
  • IMF 14 ayaa lagu wadaa marka shuruudaha soo socda waa run, waayo, 10 daqiiqo:
    • High-voltage battery temperature is greater than 131 ° F (55 ° C)
    • Farqiga u dhexeeya heerkulka ugu yaraan iyo ugu badnaan batteriga ka yar tahay 33 ° F (1 ° C)
    • No heerkulka batari unu ka Control Battery ku Module

Xaaladaha in Calan Babaca Code qabad la'aan

Kaliya unu qabad la'aan la nadiifiyay karaa Unit Gudbinta Electronic Control ah (TECU) ama taariikhda HCM isticmaalaya ServiceRanger. TECU ayaa si toos ah oo ansixiyay unu ka dib markii taariikhda 200 saacadood iyo HCM si toos ah oo ansixiyay unu ka soo taariikhda ka dib qalad uu Wax qabad la'aan, waayo, 200 saacadood.

code qalad Tani waxaa keeni kara wax ka mid ah kuwan soo socda:

  • IMF 3, 4, 5
    • Vehicle suunka ka HCM si Battery Fan Relay
    • Battery Fan Relay
    • Gudiga sare
  • IMF 14
    • Battery Fan Relay
    • Battery Fan
    • Shidan Filter Air
    • Battery Fan Relay korontada ugu weyn

khalad Code 38 – Battery Fan Relay Test

Aqoonsiga Qeybta:

Front Harness View HCM - Hybrid System Interface Connector

Front la habeeyo View
Gudiga sare – Hybrid System Wajahadda Connecto

Harness Connector View (PEC 19 - Way)

La habeeyo isku xira View
(PEC 19 – Jidka)

FIIRO GAAR AH: U dir ka Eaton Qeybta Hybrid oo isku xira Location waayo, Goobaha isku xira in Systems MY08

FIIRO GAAR AH: U dir ka Eaton Qeybta Hybrid oo isku xira Location waayo, Goobaha isku xira in Systems MY09.

Eaton HCM Battery Fan Relay PEC Battery connector

STEP 1. Hubi xaaladda code qalad Active ama qabad la'aan.

  1. Dib u eeg oo raaca digniinaha & ganaaxyada.
  2. Ceshano codes qalad Active iyo FMIs la ServiceRanger isticmaalaya Baarista 9-Jidka isku xira.
  3. Disconnect the Temperature Sensor Connector at the Motor/Generator.
    Danger: Eeg High-Voltage Service Shutdown and Power-Up Procedures. Raac habraaca si looga fogaado filaan ah, gubaan ama dhimasho ka khaldan u maareeyeen a high-voltage. Raac habraaca si looga fogaado filaan ah, gubaan ama dhimasho ka khaldan u maareeyeen a high-voltage.
  4. Exchange Battery Fan Relay la Relay kale si loo arko haddii qalad celinta.
    • Haddii eed ma leh Relay cusub kuma ay soo noqon, bedeli Fan Battery ah Relay, ka dibna tag Tallaabada 9.
    • Haddii qalad Laabtay la Relay cusub, tag Tallaabada 2.

STEP 2. Hubi joogo FMI.

  1. Waa kuwee FMIs ayaa ku qoran Talaabada 1?
    Fiiro gaar ah * taageere batari waa in la banki oo waafaqsan shuruudaha Eaton® imtixaanka si fiican u shaqaynayn. Haddii banki ayaa si ka duwan, la tasho OEM for schematic taararka saxda ah.

    • Haddii FMI 5 waxaa ku qoran, tag Tallaabada 3.
    • Haddii FMI 3 waxaa ku qoran, tag Tallaabada 4.
    • Haddii FMI 4 waxaa ku qoran, tag Tallaabada 5.
    • Haddii FMI 14 waxaa ku qoran, tag Tallaabada 6.

STEP 3. Hubi sii wareeggeedii HCM la habeeyo.

  1. Key off.
  2. Goostay cable batari negative.
  3. Barkinta la habeeyo Gudiga sare ee 38-Jidka isku xira.
  4. Measure the resistance between the HCM Harness 38- Jidka isku xira Pin 26 iyo Pin 4
    • Haddii iska caabin ah u dhexeeya Pin 26 iyo Pin 4 waa 40-120 ohms, bedeli Control Module Hybrid (Gudiga sare) (Oo kaliya haddii Babaca Code waa Active), ka dibna tag Tallaabada 9.
    • Haddii caabiga ka baxsan kala duwan ee, cusboonaysiiyo la habeeyo Vehicle ee wareeg furan, ka dibna tag Tallaabada 9.

STEP 4. Hubi voltages of wareeggeedii HCM la habeeyo.

  1. Key on.
  2. danab Cabbirka u dhexeeya Gudiga la habeeyo 38-Jidka isku xira Pin 26 iyo dhulka ee muhiimka ah oo ku saabsan:
    • Haddii danab dhexeeya Pin 26 iyo dhulka waa 0 volts, bedeli Control Module ku Hybrid (Gudiga sare) (kaliya waa code qalad waa Active), ka dibna tag Tallaabada 9.
    • Haddii danab dhexeeya Pin 26 iyo dhulka waa 12 volts, cusboonaysiiyo gaaban si VBATT on la habeeyo ah, ka dibna tag Tallaabada 9.

STEP 5. Hubi sii wareeggeedii HCM la habeeyo.

  1. Key off.
  2. Goostay cable batari negative.
  3. Cabir iska caabin ah u dhexeeya Gudiga System la habeeyo 38-Jidka isku xira musmaarradii 26 iyo dhulka:
    • Haddii iska caabin ah oo u dhexeeya Pin 26 iyo dhulka waa 10km ohms ama ka weyn, bedeli Control Module ku Hybrid (Gudiga sare) (kaliya waa code qalad waa Active), ka dibna tag Tallaabada 9.
    • Haddii iska caabin ah ka baxsan ee kala duwan, cusboonaysiiyo la habeeyo Vehicle ee gaaban dhulka, ka dibna tag Tallaabada 9.

STEP 6. Hubi xaaladda PEC Air Filter Cunsurka.

  1. Key off.
  2. Saar iyo kormeerto Filter ee Air on tubada PEC iyo Screen Qiiqa ku Outlet PEC ah.
    • Haddii Filter Air iyo Screen Qiiqa nadiif ah oo xor ka ah haraaga burburka ayaa waxaa, tag Tallaabada 7.
    • Haddii Filter Air waa wasakh ama Screen Qiiqa waa shidan, bedeli Filter Air iyo nadiifiso Screen Qiiqa ah. Tag Tallaabada 9.

STEP hawlgalka 7.Verify ee PEC Battery Fan.

  1. Key off.
  2. Connect ServiceRanger in Baarista 9-Jidka isku xira in cab ah.
  3. Key on.
  4. Select the following options from ServiceRanger menus: "Function Product Advanced,"" Control Hybrid Module,"Iyo" Launch ay kaleeyihiin. "
  5. Tag Tests Product dooro Battery Fan Relay.
  6. Hubi hawada ka imanaysa dekedaha hawada hore iyo xagga dambe ee PEC ah.
    • Haddii hawada laga dareemi karaa tubada hawada PEC iyo qiiqa, Haddii Babaca Code waa Eaton® xiriir firfircoon at 1-800-826-4357.
    • Haddii hawada aan la dareemi karo ka Air PEC ah tubada iyo Qiiqa, tag Tallaabada 8.

STEP 8. Hubi voltages of wareeggeedii PEC la habeeyo.

  1. Key on.
  2. Barkinta ku xira 19-Jidka at PEC ah.
  3. danab Cabbirka at 19-Jidka isku xira ka Pin 12 in Pin 14:
    • Haddii danab dhexeeya Pin 12 iyo Pin 14 waa ± 0.2 volts ee danab batari, badalo Carrier Power Electronics (PEC), ka dibna tag Tallaabada 9.
    • Haddii danab dhexeeya Pin 12 iyo Pin 14 waa ka baxsan kala duwan, dayactirka taararka ama dhibaato Relay. U dir ka OEM.

STEP 9. Hubi dayactirka.

  1. Key off.
  2. Dib isugu xir dhammaan xiriiriyeyaasha iyo xarkaha batteriga taban.
  3. Key on.
  4. codes Clear, arki Unu qabad la'aan Clear.
  5. Wado baabuur iyo isku dayaan in ay dib code ka.
  6. Hubi codes, arki View unu Active iyo Wax qabad la'aan.
    • Haddii codes ma, baaritaanka waa complete.
    • Haddii Code qalad 38 u muuqataa, heli qalad in imtixaanka, tag Tallaabada 1.
    • Haddii code kale oo aan ahayn 38 u muuqataa, arki Khalad List Code Index.

Qof kasta oo gudbinta qayb aad u baahan tahay aynu u leeyihiin! maalin isku mid ah maraakiibta la heli karo, dunida oo dhan.

U BAAHAN TAAGEERO FREE KA MID khubaro OUR?

WAC NOW
email US