Hybrid Eaton Fuller Gudbinta Babaca Code 37 – Power Supply (TECU)

Khalad code for Hybrid Eaton daydo Systems Drive (MY08) Cuneyso-8E306A-U, Cuneyso-8E306A-UPG, Cuneyso-8E306A-UP, Cuneyso-8E306A-CD, Cuneyso-8E306A-T, Cuneyso-6E606B-CD, (MY09) Cuneyso-8E406A-U / P, Cuneyso-8E406A-UP, Cuneyso-8E406A-UPG, Cuneyso-8E406A-CD, Cuneyso-8E406A-CDG, Cuneyso-8E406A-guud, Cuneyso-8E406A-T, Cuneyso-6E706B-CD, Cuneyso-6E706B-P iyo aad cuneyso-6E706B-UPG. The Unit Gudbinta Electronic Control (TECU) waxaa dhajinta in gudbinta iyo ka kooban software ah in ay gacanta ku hawlgal gudbinta; si kastaba ha ahaatee, Control Module ku Hybrid (Gudiga sare) gacanta ku hawlgalka TECU lagu jiro hab hybrid caadiga ah. The awood batari ugu weyn TECU waxaa ka dhisnayd, 12-volt feed in waddaa dhex Vehicle TECU 38-Jidka isku xira siligga ugu muhiimsan ee dhulka si batteriga terminal xun laabtay.

khalad Code 37 – Power Supply (TECU) ogaanshaha

The shuruud soo socda waa in la buuxiyaa ka hor inta nidaamka ogaadaa gardarrada:

  • TECU danab suuroggalaan waa ka weyn yahay 7 volts iyo ka yar 16 volts.
  • TECU kaliya waddaa baaritaanka haddii Shifter Electric la ordeen ka N in marsho.

Note: Marka dhib code ah Wax qabad la'aan tixraac ah Product Baarista Mode (PDM)

Xaaladaha in Calan Babaca Code Active

  • IMF 5 ayaa lagu wadaa markii TECU iska caabin korontada la qiyaasay ka hor iyo inta lagu jiro imtixaanka shifter korontada iyo natiijooyinka ayaa muujinaya cabirka ah 0.4 ohms ama ka weyn.

Uugu Marka Babaca Code 37 ayaa lagu wadaa shuruudaha soo socda dhici:

  • Gaf waxa lagu kaydiyaa xasuusta TECU.

Xaaladaha in Calan Babaca Code qabad la'aan

Kaliya unu qabad la'aan la nadiifiyay karaa Unit Gudbinta Electronic Control ah (TECU) ama taariikhda HCM isticmaalaya ServiceRanger. TECU ayaa si toos ah oo ansixiyay unu ka dib markii taariikhda 200 saacadood iyo HCM si toos ah oo ansixiyay unu ka soo taariikhda ka dib qalad uu Wax qabad la'aan, waayo, 200 saacadood.

code qalad Tani waxaa keeni kara wax ka mid ah kuwan soo socda:

  • IMF 5
    • Power sahayda si TECU
    • baytariyada Low ama xun la xidhiidha awoodda ugu weyn
    • Xarkaha jaray batari Broken ama mirdheen sidoo kale waxaa laga yaabaa in sababta keentay akhrinta iska caabin sare

khalad Code 37 – Power Supply (TECU) Test

Aqoonsiga Qeybta:

Harness Front View TECU - Vehicle Interface Connector

Front View
(TECU – Vehicle Wajahadda isku xira)

FIIRO GAAR AH: U dir ka Eaton Qeybta Hybrid oo isku xira Location waayo, Goobaha isku xira in Systems MY08

FIIRO GAAR AH: U dir ka Eaton Qeybta Hybrid oo isku xira Location waayo, Goobaha isku xira in Systems MY09.

Eaton TECU battery connector

digniin! – Ha ku shuban Test ee Port Baarista

Eaton Fuller transmission 4 pin diagnostic port

4-Pin Baarista Port
(Located at the left rear corner of the transmission.)

B – Adeegga Bat. +
C – Adeegga Bat. –
A – Adeegga Kicinta +

STEP 1. Hubi xaaladda code qalad Active ama qabad la'aan iyo oofin korontada Pretest.

  1. Ceshano codes qalad Active iyo FMIs la ServiceRanger isticmaalaya Baarista 9-Jidka isku xira.
  2. Qabtaan Pretest korontada ku.
    • Haddii Babaca Code 37 waa Active ka gaareen Pretest korontada ku, tag Tallaabada 2.
    • Haddii Babaca Code 37 Waa Wax qabad la'aan ka dib markii performing Pretest korontada ku, codes cad, arki Unu qabad la'aan Clear. Tag Tallaabada 6.

STEP 2. Hubi danab ee Gudbinta la habeeyo Baarista isku xira.

  1. Hel dekedda ogaanshaha on Gudbinta la habeeyo.
  2. Key on.
  3. danab Cabbirka dhexeeya Pin C iyo batari post xun.
    • Haddii danab dhexeeya Pin C iyo batari post xun yahay 0.70 volts ama ka yar, tag Tallaabada 3.
    • Haddii danab waa ka baxsan kala duwan, dayactirka sahayda dhulka batteriga si TECU, ka dibna tag Tallaabada 6.

STEP 3. Hubi voltages at Gudbinta la habeeyo isku xira ogaanshaha.

  1. Hel dekedda ogaanshaha on Gudbinta la habeeyo.
  2. Key on.
  3. danab Cabbirka dhexeeya Pin B iyo C Pin.
    • Haddii danab dhexeeya Pin B iyo C Pin gudahood waa 0.6 volts ee danab batari, tag Tallaabada 4.
    • Haddii danab waa ka baxsan kala duwan, dayactirka korontada batteriga si TECU. Fiyuuska laga yaabaa in la Afuufi Suurka oos. imtixaanka celi.

STEP 4. Hubi voltages at Gudbinta la habeeyo isku xira ogaanshaha.

  1. Key on.
  2. danab Cabbirka dhexeeya Pin A iyo C Pin.
    • Haddii danab dhexeeya Pin A iyo Pin C gudahood waa 0.6 volts ee danab batari, tag Tallaabada 5.
    • Haddii danab waa ka baxsan kala duwan, cusboonaysiiyo Kicinta Power Supply in ECU. Fiyuuska laga yaabaa in la Afuufi Suurka oos. imtixaanka celi.

STEP 5. Hubi daacad ah xidhiidhada Vehicle Wajahadda la habeeyo.

  1. Key off.
  2. Goostay cable batari negative.
  3. Barkinta la habeeyo Vehicle 38-Jidka isku xira.
  4. Kormeer awoodda ugu weyn ee 38-Jidka isku xira boosteejada Pin 36 iyo Pin 38, haystaha fiyuuska Wabka, iyo xidhiidhada korontada for daacadnimada iyo daxalka.
    • Haddii dhibaato ah ma helay, tag Tallaabada 6.
    • Haddii dhibaato la helay, lagu dhiso awooda / Jid dhulka for Power Main ee Supply, ka dibna tag Tallaabada 6.

STEP 6. Hubi dayactirka.

  1. Key off.
  2. Nadiifi oo xidhmaan oo dhan Xidhiidhiyayaasha.
  3. Key on.
  4. codes Clear, arki Unu qabad la'aan Clear.
  5. Wado baabuur iyo isku dayaan in ay dib code ka.
  6. Hubi codes, arki View unu Active iyo Wax qabad la'aan.
    • Haddii codes ma, baaritaanka waa complete.
    • Haddii Code qalad 37 u muuqataa, heli qalad in imtixaanka, tag Tallaabada 1.
    • Haddii code kale oo aan ahayn 37 u muuqataa, arki Khalad List Code Index.

Qof kasta oo gudbinta qayb aad u baahan tahay aynu u leeyihiin! maalin isku mid ah maraakiibta la heli karo, dunida oo dhan.

U BAAHAN TAAGEERO FREE KA MID khubaro OUR?

WAC NOW
email US