Hybrid Eaton Fuller Gudbinta Babaca Code 113 – Inverter hadda

Khalad code for Hybrid Eaton daydo Systems Drive (MY08) Cuneyso-8E306A-U, Cuneyso-8E306A-UPG, Cuneyso-8E306A-UP, Cuneyso-8E306A-CD, Cuneyso-8E306A-T, Cuneyso-6E606B-CD, (MY09) Cuneyso-8E406A-U / P, Cuneyso-8E406A-UP, Cuneyso-8E406A-UPG, Cuneyso-8E406A-CD, Cuneyso-8E406A-CDG, Cuneyso-8E406A-guud, Cuneyso-8E406A-T, Cuneyso-6E706B-CD, Cuneyso-6E706B-P iyo aad cuneyso-6E706B-UPG. Read hoose si aad u bartaan sida si ay u tijaabiso, nadiifiso iyo hagaajin qalad code qalad aad Freightliner, Mack, Peterbilt, Kenworth, Volvo, International, iyo gaari xamuul culus-waajib iyo qalabka. Inverter ayaa ku xiran Power Electronics Carrier ah (PEC) iyada oo a high-voltage DC cable kaas oo siiya 340 volts ka batariga. Inta uu hawlgalka socday, Inverter ee kormeera si Motor / Generator hadda wax soo saarka.

khalad Code 113 – Inverter Current Detection

The shuruud soo socda waa in la buuxiyaa ka hor inta nidaamka ogaadaa gardarrada:

  • danab suuroggalaan Inverter waa ka weyn yahay 7 volts iyo ka yar 16 volts.

Note: Marka dhib code ah Wax qabad la'aan tixraac ah Product Baarista Mode (PDM)

Xaaladaha in Calan Babaca Code Active

  • IMF 6 ayaa lagu wadaa marka hadda Inverter IGBT waa ka weyn yahay 800 amps waayo, 0.05 MS ama cable motor waa la soo gaabiyey.
  • IMF 14 ayaa lagu wadaa markii Xuddunta motor amray waa eber iyo haatan lagu soo waramayaa by Inverter ah.

Uugu Marka Babaca Code 113 ayaa lagu wadaa shuruudaha soo socda dhici:

  • Amber "Check Hybrid" illuminates light.
  • Gaf waxa lagu kaydiyaa Control Module Hybrid (Gudiga sare) xusuusta.
  • Inverter xidho nidaamka a high-voltage off.
  • Gudiga sii si loo xakameeyo gaariga hybrid ah in hab naaftada kaliya.
  • la bixin kari Gudbinta bilaabi marsho in 1aad.

Xaaladaha in Calan Babaca Code qabad la'aan

Kaliya unu qabad la'aan la nadiifiyay karaa Unit Gudbinta Electronic Control ah (TECU) ama taariikhda HCM isticmaalaya ServiceRanger. TECU ayaa si toos ah oo ansixiyay unu ka dib markii taariikhda 200 saacadood iyo HCM si toos ah oo ansixiyay unu ka soo taariikhda ka dib qalad uu Wax qabad la'aan, waayo, 200 saacadood.

code qalad Tani waxaa keeni kara wax ka mid ah kuwan soo socda:

  • IMF 2
    • Inverter
    • motor / Generator
    • fiilooyinka a high-voltage AC
  • IMF 14
    • motor / Generator
    • Fiilooyinka AC High-danab

khalad Code 113 – Inverter Test hadda

Aqoonsiga Qeybta:

High-Voltage AC Harness Connector View

High-danab AC la habeeyo isku xira View
(Amphenol isku xira)

High-Voltage AC Motor/Gen Connector View Amphenol Connector

System MY08 – High-danab AC Motor / Generator isku xira View
(Amphenol isku xira)

High-Voltage AC Motor/Gen Connector View

System MY09- High-danab AC Motor / Generator isku xira View
(Amphenol isku xira)

FIIRO GAAR AH: U dir ka Eaton Qeybta Hybrid oo isku xira Location waayo, Goobaha isku xira in Systems MY08

FIIRO GAAR AH: U dir ka Eaton Qeybta Hybrid oo isku xira Location waayo, Goobaha isku xira in Systems MY09.

Inverter Motor/Generator connector location Eaton Fuller transmission

STEP 1. Hubi joogo FMIs.

  1. Dib u eeg oo raaca digniinaha & ganaaxyada.
  2. Ceshano codes qalad Active iyo FMIs la ServiceRanger isticmaalaya Baarista 9-Jidka isku xira ama gacanta.
    Danger: Eeg High-Voltage Service Shutdown and Power-Up Procedures. Raac habraaca si looga fogaado filaan ah, gubaan ama dhimasho ka khaldan u maareeyeen a high-voltage.
  3. Key off.
  4. Waa kuwee FMIs joogaan?
    • Haddii Babaca Code 113 IMF 6 waxaa ku qoran, tag Tallaabada 2.
    • Haddii Babaca Code 113 IMF 14 waxaa ku qoran, tag Tallaabada 5.

STEP 2. Hubi daacad ah cable AC.

  1. Arag baadho cable AC ah calaamadaha abrasion, jeexan ama fiilooyinka bandhigi.
  2. Remove the AC High-Voltage Cable at the Motor/Generator and Inverter.
  3. Cabir iska caabin ah u dhexeeya soo socda AC High-danab Cable musmaarradii:
    • A-B
    • B-C
    • C-A
      Note: auto-ka bilowda Waat digital ah / Ohm Meter waa in la isticmaalaa.
    • Haddii iska caabin ah oo u dhexeeya marxalad kasta waa 5 ama ka weyn, tag Tallaabada 3.
    • Haddii iska caabin ah ka baxsan ee kala duwan, badalo AC High-danab la habeeyo, ka dibna tag Tallaabada 5.

STEP 3. Hubi sii AC Cable oo dhulka ku.

  1. Cabir iska caabin ah ee mid kasta AC High-danab Cable Pin dhulka.
    • Haddii iska caabin ah oo u dhexeeya pin kasta oo dhulka waa 5 ama ka weyn, bedeli Inverter ah, ka dibna tag Tallaabada 5.
    • Haddii iska caabin ah ka baxsan ee kala duwan, bedeli cable-danab sare AC, ka dibna tag Tallaabada 5.

STEP 4. Hubi sii Inverter inay xiriir Motor / Generator ee AC Cable ee.

  1. Ka saar High-danab AC u Cable ka Inverter iyo Motor / Generator.
  2. Cabir iska caabin ah ee High-danab AC u Cable ka isku xira Inverter u Motor / Generator isku xira on kasta oo ka mid ah biinanka soo socda:
    • A-A
    • B-B
    • C-C
      Note: auto-ka bilowda Waat digital ah / Ohm Meter waa in la isticmaalaa.

      • Haddii iska caabin yar tahay 1 Ohm on wareeg kasta, bedeli Motor / Generator ah, ka dibna tag Tallaabada 5.
      • Haddii iska caabin ah ka baxsan ee kala duwan, badalo AC High-danab la habeeyo, ka dibna tag Tallaabada 5.

STEP 4. Hubi Repair.

  1. Key off.
  2. Xidhmaan oo dhan Xidhiidhiyayaasha iyo cable ka batari negative.
  3. Key on.
  4. codes Clear, arki Unu qabad la'aan Clear.
  5. Wado baabuur iyo isku dayaan in ay dib code ka.
  6. Hubi codes, arki View unu Active iyo Wax qabad la'aan.
    • Haddii codes ma, baaritaanka waa complete.
    • Haddii Code qalad 113 u muuqataa, heli qalad in imtixaanka, tag Tallaabada 1.
    • Haddii code kale oo aan ahayn 113 u muuqataa, arki Khalad List Code Index.

Qof kasta oo gudbinta qayb aad u baahan tahay aynu u leeyihiin! maalin isku mid ah maraakiibta la heli karo, dunida oo dhan.

U BAAHAN TAAGEERO FREE KA MID khubaro OUR?

WAC NOW
email US