Hybrid Eaton Fuller Gudbinta Babaca Code 109 – Battery danab Sare 2 Control Unit Power Supply

Khalad code for Hybrid Eaton daydo Systems Drive (MY08) Cuneyso-8E306A-U, Cuneyso-8E306A-UPG, Cuneyso-8E306A-UP, Cuneyso-8E306A-CD, EH-8E306A-T and EH-6E606B-CD. Read hoose si aad u bartaan sida si ay u tijaabiso, nadiifiso iyo hagaajin qalad code qalad aad Freightliner, Mack, Peterbilt, Kenworth, Volvo, International, iyo gaari xamuul culus-waajib iyo qalabka. The baytariyada a high-voltage yihiin 172 volts kasta ku xiran ee taxanahan in ay soo saaraan 340 volts DC. The Unit Control Battery ku yaalla Box Relay helo awood suuroggalaan 12-volt oo dhulka ka Inverter ah.

khalad Code 109 – Battery danab Sare 2 Control Unit Power Supply Ogaanshaha

The shuruud soo socda waa in la buuxiyaa ka hor inta nidaamka ogaadaa gardarrada:

  • Control Module Hybrid (Gudiga sare) danab suuroggalaan waa ka weyn yahay 7 volts iyo ka yar 16 volts.

Note: Marka dhib code ah Wax qabad la'aan tixraac ah Product Baarista Mode (PDM)

Xaaladaha in Calan Babaca Code Active

  • IMF 3 ayaa lagu wadaa markii BCU ku ogaadaa danab suuroggalaan ka wada weyn yahay 16 volts waayo, 1 labaad.
    IMF 4 ayaa lagu wadaa markii BCU ku ogaadaa danab suuroggalaan uu ka yar yahay 7 volts waayo, 1 labaad.

Uugu Marka Babaca Code 109 ayaa lagu wadaa shuruudaha soo socda dhici:

  • Amber "Check Hybrid" illuminates light.
  • Gaf waxa lagu kaydiyaa Control Module Hybrid (Gudiga sare) xusuusta.
  • Inverter xidho nidaamka a high-voltage off.
  • Gudiga sii si loo xakameeyo gaariga hybrid ah in hab naaftada kaliya.
  • la bixin kari Gudbinta bilaabi marsho in 1aad.

Xaaladaha in Calan Babaca Code qabad la'aan

Kaliya unu qabad la'aan la nadiifiyay karaa Unit Gudbinta Electronic Control ah (TECU) ama taariikhda HCM isticmaalaya ServiceRanger. TECU ayaa si toos ah oo ansixiyay unu ka dib markii taariikhda 200 saacadood iyo HCM si toos ah oo ansixiyay unu ka soo taariikhda ka dib qalad uu Wax qabad la'aan, waayo, 200 saacadood.

code qalad Tani waxaa keeni kara wax ka mid ah kuwan soo socda:

  • IMF 3
    • PEC
  • IMF 4
    • Amraya nidaamka PEC suunka Low-danab ka Inverter in PEC
    • Gudiga sare
    • suunka Low-danab ka HCM si Inverter
    • Inverter

khalad Code 109 – Battery danab Sare 2 Control Unit Power Supply Test

Aqoonsiga Qeybta:

HCM - Hybrid System Interface Connector

La habeeyo Front View
(Gudiga sare – Hybrid System Wajahadda isku xira)

Inverter 56-Way Mating Connector View

Delphi 56-Jidka isku xira rimay View
(Inverter – Isku xira danab Low)

Deutsch 19 - Way Mating Connector View

Deutsch 19 – Jidka isku xira rimay View
(PEC – Isku xira danab Low)

FIIRO GAAR AH: U dir ka Eaton Qeybta Hybrid oo isku xira Location waayo, Goobaha isku xira in Systems MY08

HCM Inverter PEC connector Eaton Fuller transmission

STEP 1. Hubi xaaladda code qalad Active ama qabad la'aan.

  1. Dib u eeg oo raaca digniinaha & ganaaxyada.
  2. Ceshano codes qalad Active iyo FMIs la ServiceRanger isticmaalaya Baarista 9-Jidka isku xira.
  3. Key off.
    Danger: Eeg High-Voltage Service Shutdown and Power-Up Procedures. Raac habraaca si looga fogaado filaan ah, gubaan ama dhimasho ka khaldan u maareeyeen a high-voltage.
  4. Waa kuwee FMIs joogaan?
    • Haddii Babaca Code 109 IMF 3 ama 4 waxay ku qoran yihiin la Babaca Code Active 114, tag khalad Code 114 -Inverter Power Supply.
      Haddii Babaca Code 109 IMF 3 ama 4 waxay ku qoran yihiin oo aan lahayn Babaca Code Active 114, tag Tallaabada 2.

STEP 2. Hubi danab batariga ee PEC 19-Jidka isku xira.

  1. Barkinta PEC 19-Jidka isku xira.
  2. Connect mitir multi inay isku xira PEC 19-Jidka Pin 6 iyo Pin 7.
  3. multimeter Place halkaas oo laga daawan karaa, halka xiga taagan in gaari xamuul ah.
  4. Key on.
  5. Waxaad dhawrtaa multimeter reading danab:
    • Haddii danab dhexeeya Pin 6 iyo Pin 7 waa 11-13 volts, badalo Carrier Power Electronics (PEC), ka dibna tag Tallaabada 4.
    • Haddii danab dhexeeya Pin 6 iyo Pin 7 waa in ka yar 7 volts, tag Tallaabada 3.

STEP 3. Hubi sii on PEC 19-Jidka inay Inverter 56-Jidka Low danab la habeeyo.

  1. Key off.
  2. Barkinta Inverter ee 56-Jidka isku xira.
  3. Cabir iska caabin ah oo ku saabsan soo socda:
    • Inverter 56-Jidka isku xira Pin 16 si PEC 19-Jidka isku xira Pin 6
    • Inverter 56-Jidka isku xira Pin 34 si PEC 19-Jidka isku xira Pin 7
      Note: Gently flex the Inverter 56-Way Connector Harness near the connector while monitoring the voltage values.

      • Haddii iska caabin ka Pin 16 in Pin 6 waa 0-0.3 ohms iyo iska caabin ka Pin 34 in Pin 7 waa 0-0.3 ohms, bedeli Inverter ah, ka dibna tag Tallaabada 4.
      • Haddii iska caabin ah ka baxsan ee kala duwan, bedeli Low-danab ee la habeeyo ka PEC si Inverter ah, ka dibna tag Tallaabada 4.

STEP 4. Hubi dayactirka.

  1. Key off.
  2. Xidhmaan oo dhan Xidhiidhiyayaasha iyo cable ka batari negative.
  3. Key on.
  4. codes Clear, arki Unu qabad la'aan Clear.
  5. Wado baabuur iyo isku dayaan in ay dib code ka.
  6. Hubi codes, arki View unu Active iyo Wax qabad la'aan.
    • Haddii codes ma, baaritaanka waa complete.
    • Haddii Code qalad 109 u muuqataa, heli qalad in imtixaanka, tag Tallaabada 1.
    • Haddii code kale oo aan ahayn 109 u muuqataa, arki Khalad List Code Index.

Qof kasta oo gudbinta qayb aad u baahan tahay aynu u leeyihiin! maalin isku mid ah maraakiibta la heli karo, dunida oo dhan.

U BAAHAN TAAGEERO FREE KA MID khubaro OUR?

WAC NOW
email US