Hybrid Eaton Fuller Gudbinta Babaca Code 118 – Darran High-danab Relay Control Circuit (MY08 Systems)

Khalad code for Hybrid Eaton daydo Systems Drive (MY08) Cuneyso-8E306A-U, Cuneyso-8E306A-UPG, Cuneyso-8E306A-UP, Cuneyso-8E306A-CD, EH-8E306A-T and EH-6E606B-CD. Read hoose si aad u bartaan sida si ay u tijaabiso, nadiifiso iyo hagaajin qalad code qalad aad Freightliner, Mack, Peterbilt, Kenworth, Volvo, International, iyo gaari xamuul culus-waajib iyo qalabka. Darran High-danab Relays The ku yaalla Power Electronics Carrier ah (PEC) waxaa gacanta ku Control Module ku Hybrid (Gudiga sare). At muhiim ah oo ku saabsan, baalo korontada waxaa bixisey ka sanduuqa Relay u itaal darran High-danab Relays ah. Marka xulashada ePTO la xushay on Control ku Riix badhanka Shift, Gudiga sare ee energizes wareeggeedii gacanta ee Relays xun ugu weyn ee togan iyo ugu weyn. Awoodda markaas mara High-danab darran ee Relays u Converter DC / DC.

khalad Code 118 – Darran High-danab Relay Control Circuit Ogaanshaha

The shuruud soo socda waa in la buuxiyaa ka hor inta nidaamka ogaadaa gardarrada:

  • Control Module Hybrid (Gudiga sare) danab suuroggalaan waa ka weyn yahay 7 volts iyo ka yar 16 volts.

Note: Marka dhib code ah Wax qabad la'aan tixraac ah Product Baarista Mode (PDM)

Xaaladaha in Calan Babaca Code Active

  • IMF 3 is set when the HCM detects a short to battery in the coil circuit of the Auxiliary High-Voltage Relay.
  • IMF 4 is set when the HCM detects a short to ground in the coil circuit of the Auxiliary High-Voltage Relay.
  • IMF 5 ayaa lagu wadaa markii Gudiga sare ee ogaadaa furan wareegi gariiradda ah darran High-danab Relay ah.

Uugu Marka Babaca Code 118 ayaa lagu wadaa shuruudaha soo socda dhici:

  • Amber "Check Hybrid" illuminates light.
  • Gaf waxa lagu kaydiyaa Control Module Hybrid (Gudiga sare) xusuusta.
  • The DC / DC Converter ma shaqeeyaan, sababtoo ah HCM de-energizes circuit Relay-danab sare ee kaabayaal ah.

Xaaladaha in Calan Babaca Code qabad la'aan

Kaliya unu qabad la'aan la nadiifiyay karaa Unit Gudbinta Electronic Control ah (TECU) ama taariikhda HCM isticmaalaya ServiceRanger. TECU ayaa si toos ah oo ansixiyay unu ka dib markii taariikhda 200 saacadood iyo HCM si toos ah oo ansixiyay unu ka soo taariikhda ka dib qalad uu Wax qabad la'aan, waayo, 200 saacadood.

code qalad Tani waxaa keeni kara wax ka mid ah kuwan soo socda:

  • IMF 3, 4, 5
    • PEC
    • La habeeyo System Hybrid
    • DC Cable High-danab Loop
    • DC / DC Converter

khalad Code 118 – Darran High-danab Relay Control Circuit Test

STEP 1. Hubi xaaladda code qalad Active ama qabad la'aan iyo hadiyad FMIs.

  1. Dib u eeg oo raaca digniinaha & ganaaxyada.
  2. Ceshano codes qalad Active iyo FMIs la ServiceRanger isticmaalaya Baarista 9-Jidka isku xira.
  3. Key off.
    Danger: Eeg High-Voltage Service Shutdown and Power-Up Procedures. Raac habraaca si looga fogaado filaan ah, gubaan ama dhimasho ka khaldan u maareeyeen a high-voltage.
  4. Waa kuwee FMIs joogaan?
    • Haddii FMI 3 waxaa ku qoran, tag Tallaabada 2.
    • Haddii FMI 4 ama 5 waxay ku qoran yihiin, tag Tallaabada 3.

STEP 2. Cabir danab ee HCM lagaga dhulka.

  1. Key off.
  2. Barkinta cable ka batari negative.
  3. Barkinta la habeeyo Gudiga sare ee 38-Jidka isku xira.
  4. Key on.
  5. Measure voltage from Pin 33 si ay dhulka.
    • Haddii danab ka Pin 33 si ay dhulka waa 0 volts, bedeli Control Module ku Hybrid (Gudiga sare) (oo kaliya haddii Babaca Code waa Active), ka dibna tag Tallaabada 7.
    • Haddii danab ka Pin 33 si ay dhulka waa 11-13 volts, cusboonaysiiyo la habeeyo Nidaamka Hybrid for gaaban si batteriga, ka dibna tag Tallaabada 7.

STEP 3. Cabir iska caabin ah oo ka mid ah circuit HCM lagaga dhulka.

  1. Key off.
  2. Cabir iska caabin ka la habeeyo 38-Jidka System Gudiga sare ee isku xira on musmaarradii soo socda:
    • pin 33 in Pin 5
    • pin 33 si ay dhulka
      • Haddii iska caabin ah u dhexeeya Pin 33 iyo Pin 5 waa 12-22 ohms iyo iska caabin u dhexeeya Pin 33 iyo dhulka waa 10km ohms ama ka weyn, bedeli Control Module ku Hybrid (Gudiga sare) (oo kaliya haddii Babaca Code waa Active). Tag Tallaabada 7.
      • Haddii iska caabin ah ka baxsan ee kala duwan, tag Tallaabada 4.

STEP 4. Cabir iska caabin ah Bulkhead Terminal dhulka.

  1. Key off.
  2. Barkinta PEC 19-Jidka isku xira.
  3. Cabir iska caabin ah u dhexeeya Bulkhead PEC 19-Jidka Terminal at musmaarradii soo socda:
    • pin 8 in Pin 10
    • pin 8 si ay dhulka
      • Haddii iska caabin ah oo u dhexeeya Pin 8 iyo Pin 10 waa 12-22 ohms iyo iska caabin ka Pin 8 si ay dhulka waa 10km ohms ama ka weyn, replace the Hybrid Harness between the HCM and the PEC for a short to ground or open. Tag Tallaabada 7.
      • Haddii iska caabin ah ka baxsan ee kala duwan, tag Tallaabada 5.

STEP 5. Cabir iska caabin ka DC / DC Converter dhulka.

  1. Key off.
  2. Barkinta DC / DC Converter isku xira High-danab ee PEC ah.
  3. Cabir iska caabin ah inta u dhaxaysa 2-Jidka DC / DC Converter Cable ee isku xira garoonka iyo musmaarradii soo socda:
    • pin 1 in Pin 2
    • pin 1 si ay dhulka
      • Haddii iska caabin ah oo u dhexeeya Pin 1 iyo Pin 2 waa 0-0.3 ohms iyo iska caabin ka Pin 1 si ay dhulka waa 10km ohms ama ka weyn, badalo Carrier Power Electronics (PEC), ka dibna tag Tallaabada 7.
      • Haddii iska caabin ah ka baxsan ee kala duwan, tag Tallaabada 6.

STEP 6. Cabir iska caabin ka DC / DC Converter dhulka.

  1. Key off.
  2. Barkinta DC / DC Converter isku xira High-danab ee Converter DC / DC.
  3. Cabir iska caabin ah u dhexeeya Converter DC / DC ee Terminal at musmaarradii soo socda:
    • pin 1 in Pin 2
    • pin 1 si ay dhulka
      • Haddii iska caabin ah oo u dhexeeya Pin 1 iyo Pin 2 waa 0-0.3 ohms iyo iska caabin ka Pin 1 si ay dhulka waa 10km ohms ama ka weyn, bedeli DC / DC Converter Cable High-danab ku, ka dibna tag Tallaabada 7.
      • Haddii iska caabin ah ka baxsan ee kala duwan, badalo Converter DC / DC, ka dibna tag Tallaabada 7.

STEP 7. Hubi dayactirka.

  1. Key off.
  2. Xidhmaan oo dhan Xidhiidhiyayaasha iyo cable ka batari negative.
  3. Key on.
  4. codes Clear, arki Unu qabad la'aan Clear.
  5. Wado baabuur iyo isku dayaan in ay dib code ka.
  6. Hubi codes, arki View unu Active iyo Wax qabad la'aan.
    • Haddii codes ma, baaritaanka waa complete.
    • Haddii Code qalad 118 u muuqataa, heli qalad in imtixaanka, tag Tallaabada 1.
    • Haddii code kale oo aan ahayn 118 u muuqataa, arki Khalad List Code Index.

Qof kasta oo gudbinta qayb aad u baahan tahay aynu u leeyihiin! maalin isku mid ah maraakiibta la heli karo, dunida oo dhan.

U BAAHAN TAAGEERO FREE KA MID khubaro OUR?

WAC NOW
email US