Eaton Fuller Code Babaca Hybrid 8 – Loss of wareegay Kicinta Power (Gudiga sare)

Khalad code for Hybrid Eaton daydo Systems Drive (MY08) Cuneyso-8E306A-U, Cuneyso-8E306A-UPG, Cuneyso-8E306A-UP, Cuneyso-8E306A-CD, Cuneyso-8E306A-T, Cuneyso-6E606B-CD, (MY09) Cuneyso-8E406A-U / P, Cuneyso-8E406A-UP, Cuneyso-8E406A-UPG, Cuneyso-8E406A-CD, Cuneyso-8E406A-CDG, Cuneyso-8E406A-guud, Cuneyso-8E406A-T, Cuneyso-6E706B-CD, Cuneyso-6E706B-P iyo aad cuneyso-6E706B-UPG. The Control Module Hybrid (Gudiga sare) waxaa dhajinta in gudbinta iyo waxa ku jira oo dhan ee software-ka si loo xakameeyo labada awoodda korontada ee hybrid iyo sidoo kale howlgalka gudbinta. The xoogga suuroggalaan Gudiga sare waa u dhisnayd, hal feed 12-volt in waddaa dhex Vehicle HCM 38-Jidka isku xira.

khalad Code 8 – Loss of wareegay Kicinta Power (Gudiga sare) ogaanshaha

The shuruud soo socda waa in la buuxiyaa ka hor inta nidaamka ogaadaa gardarrada:

  • Output xawaaraha qodaa waa ka weyn yahay 0 RPM.

Xaaladaha in Calan Babaca Code Active

Xaaladaha in Calan Babaca Code:
• IMF 4 ayaa lagu wadaa markii HCM lumiyo awoodda suuroggalaan inta lagu jiro hawlgalka, waayo, 2 ilbiriqsi ama ka badan.

Uugu Marka Babaca Code 8 ayaa lagu wadaa shuruudaha soo socda dhici:

  • Amber "Check Hybrid" illuminates light.
  • Gaf waxa lagu kaydiyaa Control Module Hybrid (Gudiga sare) xusuusta.
  • Red "Service" illuminates iftiinka iyo dareenka gubashada ah "F" soo bandhigay marsho ah, haddii eed ku dhacdaa ka hor haybad kor u.
    • Gaf waxa lagu kaydiyaa Waaxda Gudbinta Electronic Control (TECU) xusuusta ay sabab u tahay la'aanta xidhiidhka la HCM.
  • Haddii qalad dhacaa halka gaariga lagu dhaqaaqin, gudbinta ayaa weli ku jirta kaalinta iyo xajin furo markii gaariga ay timaado in la taagtaagan ah. xajin xirmin iyo gaari u shaqayn doonaan 1aad iyo beddeli ka stop.
  • Haddii qalad ay taasi dhacdo ee kor xoog, gaariga ma kumbyuutarradeedu.

Xaaladaha in Calan Babaca Code qabad la'aan

Kaliya unu qabad la'aan la nadiifiyay karaa Unit Gudbinta Electronic Control ah (TECU) ama taariikhda HCM isticmaalaya ServiceRanger. TECU ayaa si toos ah oo ansixiyay unu ka dib markii taariikhda 200 saacadood iyo HCM si toos ah oo ansixiyay unu ka soo taariikhda ka dib qalad uu Wax qabad la'aan, waayo, 200 saacadood.

code qalad Tani waxaa keeni kara wax ka mid ah kuwan soo socda:

  • IMF 4
    • Suuroggalaan Power Supply in HCM
    • Gudiga sare

khalad Code 8 – Loss of wareegay Kicinta Power (Gudiga sare) Test

Aqoonsiga Qeybta:

Front Harness View

Front la habeeyo View
(Gudiga sare – Vehicle Wajahadda isku xira)

Temperature Sensor

Switch Relay caadiga ah

FIIRO GAAR AH: U dir ka Eaton Qeybta Hybrid oo isku xira Location waayo, Goobaha isku xira in Systems MY08

FIIRO GAAR AH: U dir ka Eaton Qeybta Hybrid oo isku xira Location waayo, Goobaha isku xira in Systems MY09.

Eaton Fuller ignition relays

STEP 1. Hubi xaaladda code qalad iyo sii-qoraha / Generator circuit sensor Heerkulka

  1. Dib u eeg oo raaca digniinaha & ganaaxyada.
  2. Ceshano codes qalad Active iyo FMIs la ServiceRanger isticmaalaya Baarista 9-Jidka isku xira.
  3. Key off.
  4. Disconnect the Temperature Sensor Connector at the Motor/Generator.
    Danger: Eeg High-Voltage Service Shutdown and Power-Up Procedures. Raac habraaca si looga fogaado filaan ah, gubaan ama dhimasho ka khaldan u maareeyeen a high-voltage.
  5. 5. Cabir iska caabin at Motor / Generator 2-jidka isku xira sensor Heerkulka ka Pin A si Pin B(MY08)/ pin 1 in Pin 2(MY09):
    • Haddii iska caabin ah waa 0.8K ohms in 301.7K ohms, tag Tallaabada 2.
    • Haddii iska caabin ah ka baxsan ee kala duwan, bedeli Motor / Generator ah, ka dibna tag Tallaabada 3.

STEP 2. Hubi sii nverter iyo Motor / Generator circuit sensor Heerkulka.

  1. Key off
  2. Barkinta Inverter ee 56-Jidka isku xira.
  3. 3. Xidhmaan 2-Jidka Motor / Generator soo Heerkulka sensor isku xira.
  4. Cabir iska caabin ah ee soo socda:
      • Inverter 56-Jidka isku xira Pin 50 in Pin 38(MY08) / 40-Jidka isku xira Pin 37 in Pin 36, Inverter(MY09.
      • Inverter 56-Jidka isku xira Pin 50 si ay dhulka (MY08) / 40-Jidka isku xira Pin 37 si ay dhulka (MY09).

    Note: Si tartiib ah awooddiisa Inverter ee 56-jidka la habeeyo dhow isku xira inta la socodka qiimaha caabiga.

    1. Haddii iska caabin ah waa 0.8K-301.7K ohms dhexeeya Pin 50 iyo Pin 38 (37 & 37) iyo iska caabin ah oo u dhexeeya Pin 50 (37) iyo dhulka waa 10km ohms ama ka weyn, bedeli Inverter ah, ka dibna tag Tallaabada 3.
    2. Haddii iska caabin ah ka baxsan ee kala duwan, cusboonaysiiyo furan ama gaaban dhulka ee suunka u dhexeeya isku xira Inverter iyo Motor / Generator 2-jidka isku xira, ka dibna tag Tallaabada 3.

STEP 3. Hubi dayactirka.

  1. Key off.
  2. Xidhmaan oo dhan Xidhiidhiyayaasha iyo cable ka batari negative.
  3. Key on.
  4. codes Clear, eeg "Babaca Code wax kaqabashada iyo Banaynta" ee bogga 13.
  5. Wado baabuur iyo isku dayaan in ay dib code ka.
  6. Hubi codes, eeg "View unu Active iyo Wax qabad la'aan" ee bogga 13.
    • Haddii codes ma, baaritaanka waa complete.
    • Haddii Babaca Code 2 u muuqataa, heli qalad in imtixaanka, tag Tallaabada 1.
    • Haddii code kale oo aan ahayn 2 u muuqataa, arki Khalad List Code Index.

Qof kasta oo gudbinta qayb aad u baahan tahay aynu u leeyihiin! maalin isku mid ah maraakiibta la heli karo, dunida oo dhan.

U BAAHAN TAAGEERO FREE KA MID khubaro OUR?

WAC NOW
email US