Eaton Fuller Code Babaca Hybrid 5 Motor Generator AC Cable

Khalad code for Hybrid Eaton daydo Systems Drive (MY08) Cuneyso-8E306A-U, Cuneyso-8E306A-UPG, Cuneyso-8E306A-UP, Cuneyso-8E306A-CD, Cuneyso-8E306A-T, Cuneyso-6E606B-CD, (MY09) Cuneyso-8E406A-U / P, Cuneyso-8E406A-UP, Cuneyso-8E406A-UPG, Cuneyso-8E406A-CD, Cuneyso-8E406A-CDG, Cuneyso-8E406A-guud, Cuneyso-8E406A-T, Cuneyso-6E706B-CD, Cuneyso-6E706B-P iyo aad cuneyso-6E706B-UPG. The Motor/Generator AC Cables are connected from the Motor/Generator to the Inverter. These cables carry up to 500 volts AC 3 wajiga markii gaariga uu yahay hawlgal.

khalad Code 5 Motor / Generator AC Cable Ogaanshaha

  • danab Inverters suuroggalaan waa ka weyn yahay 7 volts iyo ka yar 16 volts.
  • FMI 25-27 baahan RPM Motor / Generator in ay ka weyn tahay 500 RPM.
  • IMF 28 waxay u baahan tahay RPM Motor / Generator in ay ka yar tahay 500 RPM.
  • IMF 29 waxay u baahan tahay RPM Motor / Generator in ay ka yar tahay 50 RPM.

Xaaladaha in Calan Babaca Code Active

Xaaladaha in Calan Babaca Code:

  • IMF 21: Calan markii Bannaanka interlock AC furan yahay.
  • IMF 22, 23, 24 ayaa lagu wadaa markii 2-waji motor hadda waa ka badan 360 amps waayo, 0.9 MS.
  • IMF 25, 26, 27 ayaa lagu wadaa markii Inverter ku ogaadaa silig hal furan iyo motor hadda ka yar tahay 8 amps waayo, 200 MS xawaare ka weyn ama loo siman yahay si 500 RPM iyo amarka hadda ka Inverter ka wada weyn yahay 20 amps.
  • IMF 28 ayaa lagu wadaa markii Motor / Generator hadda ka yar tahay 8 amps waayo, 200 MS xawaare ka yar 500 RPM iyo amarka hadda waa ka sii badan 20 amps.
  • IMF 29 ayaa lagu wadaa inta lagu guda jiro initialization. Inverter ayaa go'aamisa haddii AC Cable ku xiran yahay dhexeeya motor iyo Inverter by diraya baxay 20 amps waayo, 200 MS iyo hubinta feedback.

Uugu Marka Babaca Code 5 ayaa lagu wadaa shuruudaha soo socda dhici:

  • Red "Stop Hybrid" illuminates light.
  • Gaf waxa lagu kaydiyaa Control Module Hybrid (Gudiga sare) xusuusta.
  • Inverter xidho nidaamka a high-voltage off.
  • Gudiga sii si loo xakameeyo gaariga hybrid ah in hab naaftada kaliya.
  • Haddii FMI 28, ama 29 joogo ilaa xoog, gaariga ma kumbyuutarradeedu.

Xaaladaha in Calan Babaca Code qabad la'aan

Kaliya unu qabad la'aan la nadiifiyay karaa Unit Gudbinta Electronic Control ah (TECU) ama taariikhda HCM isticmaalaya ServiceRanger. TECU ayaa si toos ah oo ansixiyay unu ka dib markii taariikhda 200 saacadood. Gudiga ayaa si toos ah oo ansixiyay unu ka taariikh ka dib markii code qalad uu Wax qabad la'aan, waayo, 200 saacadood.

code qalad Tani waxaa keeni kara wax ka mid ah kuwan soo socda:

  • IMF 21
    • AC Cable Interlock
  • IMF 22, 23, 24
    • Inverter
    • Motor / Generator
    • AC cable
  • IMF 25, 26, 27, 28, 29
    • Motor / Generator
    • AC Cable

khalad Code 5 – Motor / Generator Test AC Cable

System Qeybta Aqoonsiga MY08:

High-danab AC la habeeyo isku xira View

High-danab AC la habeeyo isku xira View
(Amphenol isku xira)

High-danab AC Motor / Gen isku xira View

High-danab AC Motor / Gen isku xira View
(Amphenol isku xira)

FIIRO GAAR AH: U dir ka Eaton Qeybta Hybrid oo isku xira Location waayo, Goobaha isku xira in Systems MY08

isku xira qayb hybrid

System Qeybta Aqoonsiga MY09:

High-danab AC la habeeyo isku xira View

High-danab AC la habeeyo isku xira View
(Amphenol isku xira)

High-danab AC Motor / Gen isku xira View

High-danab AC Motor / Gen isku xira View
(Amphenol isku xira)

FIIRO GAAR AH: U dir ka Eaton Qeybta Hybrid oo isku xira Location waayo, Goobaha isku xira in Systems MY09.

isku xira qayb hybrid
digniinaha & ganaaxyada

Danger: Danger muujinaysaa aad la si xun u dhaawacmay doonaa ama la dilay haddii aadan raaci doonaa habraaca ku tilmaamay.
digniin: Digniin halis degdeg ah, taas oo keeni karta dhaawac shakhsi daran haddii aadan raaci doonaa habraaca ku tilmaamay.
digniin: Digniin muujinaysaa gaariga ama hantida dhaawac dhici kara haddii aadan raaci doonaa habraaca ku tilmaamay.

Note: Note muujinaysaa faahfaahin dheeraad ah u gargaartaan in cudurka ama dayactir ah component / Nidaamka.

Raac hannaanka ku qeexan amarka tilmaamay in ay ka fogaadaan dhaawac shakhsi ahaaneed:

1. Haddii loo yaqaano a high-voltage yihiin hareeraha baabuurka iyo ka joojinta la geliyo PEC ah, qofka kaliya ee la ogol yahay waa in ay u bilaabaan gaariga uu yahay qofka saxiixay tag joojinta.
2. Ka hor inta shaqeeya on gaari ama ka soo baxaya cab halka engine la socda, waa in aad meel lever wareeg ee "N" dhigay jejebiyey la dhigto, iyo xannibi giraangirihiina.
3. Sababo nabadgelyo, had iyo jeer ka qayb biriiga adeegga ka hor doorashada jagooyinka marsho ka "N."
4. Ka hor inta aadan bilaabin gaari had iyo jeer la fadhiya kursiga darawalka, dooro "N" on gacanta ku wareejin ah, oo qarka u saaran biriiga la dhigto.
5. In baabuurta la ePTO, engine iyo / ama
Motor / Generator bilaabi kartaa in hab ePTO. Marna qabtaan dayactirka ama shaqeeyaan gaadiidka, halka hab this.
6. 12-Waat Battery wanaagsan (+) iyo negative (-) waa in la hor ineysan si alxanka kasta oo gaari kasta Hybrid qalabaysan.

digniin: Raac hannaanka ku qeexan amarka tilmaamay in ay ka fogaadaan cillad qalabka ama dhaawac.
digniin: Ha sii daayo jejebiyey la dhigto ama isku dayaan in ay doortaan marsho ilaa cadaadiska hawada waa heerka saxda ah.
digniin: Si looga fogaado waxyeelo ay ku gudbinta lagu jiro jiidaya meesha lever wareeg ee "N" oo kor u giraangiraha drive ka off dhulka ama barkinta driveline ah.

Digniinaha High-danab & ganaaxyada

  • Isticmaal CO2 ama qallalan Chemical Dab bakhtiiyeyaasha.
  • The taararka a high-voltage waxaa daboolay ningax orange ama tubbada convoluted iyo sumadaha digniin at Xidhiidhiyayaasha ku calaamadsan.
  • All Hybrid Eaton® Diesel / baabuurta Electric waxaa la qorayaa 'Hybrid’ dibaddeeda oo gaariga, oo ay la socdaan calaamad wareejin on dumisaan ah.
  • U dir ka OEM meel gaarka ah ee jiifku Jaha qaybaha hybrid.
  • HA jarjar ah fiilooyinka a high-voltage orange.
  • HA jarjar ama furo PEC ah.
  • HA jarjar ama furo Converter DC / DC.
  • HA jarjar ama furo Inverter ah.

aag-dhuleed A waa in kor loo dhigay iyo high-voltage dahaaran gacno gashi rabar (fasalka 0 la sokeeye maqaar) waxaa loo baahan yahay ka hor inta aan la shaqeeyo on a high-voltage. Dhicitaanka in la raaco tilmaamaha keeni kartaa in dhaawac shakhsi aad u daran ama dhimasho.
gacmo gashi The caag-dahaaran tahay in la xirto, halka ka shaqeeya nidaamka a high-voltage yihiin fasalka 0 la sokeeye maqaar. gacno gashi rabar ah waa in la baaro inta aan la isticmaalin KASTA socda nidaamka caag imtixaanka gashi ningax laga helay "Tools Baarista / Publications Service" ee bogga 6. Dhicitaanka in la raaco tilmaamaha keeni kartaa in dhaawac shakhsi aad u daran ama dhimasho.
Ka hor baarista ama ka shaqeeya fiilooyin a high-voltage ama qaybaha "Habka Adeegga xiritaanka High-danab iyo Power Up-" ee bogga 4 Waa in la raaco. Dhicitaanka in la raaco tilmaamaha keeni kartaa in dhaawac shakhsi aad u daran ama dhimasho.
The qalabka Shaqoxannibista iyo Tagout waa saaro kaliya farsamo yaqaan ah in kaalinta qalabka Shaqoxannibista iyo Tagout on gaariga. Dhicitaanka in la raaco tilmaamaha keeni kartaa in dhaawac shakhsi aad u daran ama dhimasho.
High-danab gacno gashi rabar dahaaran (fasalka 0 la sokeeye maqaar) waa in la gashanaadaa markuu ka shaqeeya kasta
fiilooyinka a high-voltage. The "xiritaanka High-danab Service iyo Power Up-Habka" ee bogga 4 waa in la hor raacay in ay ka saareen wax fiilooyinka a high-voltage. Dhicitaanka in la raaco tilmaamaha keeni kartaa in dhaawac shakhsi aad u daran ama dhimasho.
fiilooyinka High-danab iyo xarkaha waa orange iyo waxa ku jira qoran calaamadda digniinta ee Xidhiidhiyayaasha ah. qaybaha High-danab waxaa lagu calaamadeeyay leh calaamadda a. High-danab gacno gashi rabar dahaaran (fasalka 0 la sokeeye maqaar) waa in la isticmaalaa marka ka shaqeeya mid ka mid ah qaybaha kuwaas oo. Dhicitaanka in la raaco tilmaamaha keeni kartaa in dhaawac shakhsi aad u daran ama dhimasho.

Nidaamka High-danab xiritaanka Service

Xiritaanka Service High-danab iyo Habka Power Up-1. Raac "High-danab Work Area" nidaamka.
2. Hel ka Switch Service PEC cas on hore ee PEC iyo riixdo demiso.
3. Ka saar Cover Switch Service iyo rakibi qaybta ka joojinta (J48506).
4. tag giijin in qaybta ka joojinta.
5. Hubi in ay Switch Service PEC aan ka booska off dhaqaajin karin.
6. U ogolow nidaamka si ay u dejiyaan ugu yaraan 5 daqiiqo oo ay u guto danab sare.
7. Connect ServiceRanger iyo u arkaan Monitor Data PID 116 loo yaqaan "fili karo Battery High-danab." Isticmaalka SPN 520323 waayo xidhiidh J1939 "Battery danab RB" (Relay Box).
8. danab waa in uu noqdo 30 volts ama ka yar. Haddii danab ku xusan yahay 30 volts, uma shaqeeyaan on gaariga iyo xiriiri Eaton® ee 1-800-826-HELP (4357).
9. muhiim ah ka suuroggalaan Dami iyo sii wadi in lagu dhiso ama tallaabo dhib.
Note: danab ugu dhaco, si eber markii fure u off waa.

High-danab Service Power Up-Habka

1. Ku rakib dhan Xidhiidhiyayaasha a high-voltage galay ay qufulan.
2. Haddii aad tahay qof ka shaqeeya on gaariga, ka saar qaybta ka joojinta iyo tag.
3. Dib qaybta ka joojinta badan Switch Service.
4. Jiid Adeegga beddelo baxay oo ha set baabuurta 2 daqiiqo.
5. gaari bilow marka ay habboon tahay.

Eaton Qeybta Hybrid oo isku xira Location

Eaton Qeybta Hybrid iyo Goobaha isku xira MY08 Systems

Eaton Qeybta Hybrid oo isku xira Location MY09 Systems

Eaton Qeybta Hybrid iyo Goobaha isku xira MY09 Systems

STEP 1. Hubi xaaladda code qalad Active ama qabad la'aan.

  1. Dib u eeg oo raaca digniinaha & ganaaxyada.
  2. Ceshano codes qalad Active iyo FMIs la ServiceRanger isticmaalaya Baarista 9-Jidka isku xira.
  3. Key off.
    digniin: Eeg High-Voltage Service Shutdown and Power-Up Procedures. Raac habraaca si looga fogaado filaan ah, gubaan ama dhimasho ka khaldan u maareeyeen a high-voltage.
  4. Waa kuwee unu ay joogaan?
    • Haddii Babaca Code 5 IMF 21 waa Active, tag Tallaabada 5
    • Haddii Babaca Code 5 IMF 22, 23, ama 24 waa Active, tag Tallaabada 2.
    • Haddii Babaca Code 5 IMF 25, 26, 27, 28, ama 29 waa Active, tag Tallaabada 3.

STEP 2. Hubi sii cable a high-voltage.

  1. Key off.
  2. Ka saar cable-danab sare AC at Motor / Generator iyo Inverter
  3. Cabir iska caabin ah u dhexeeya soo socda musmaarradii cable AC:
      • (MY08 Kaliya)
          • Pin A si Pin B
          • Pin B in Pin C
          • Pin C inay Pin A

        (MY09 Kaliya)

          • Pin C inay Pin B
          • Pin B in Pin A
          • Pin A si Pin C
      • Haddii iska caabin ah oo u dhexeeya marxalad kasta waa ohms 5 ama ka weyn, bedeli Inverter ah, ka dibna tag Tallaabada 5 (MY08) Step 7 (MY09).
      • Haddii iska caabin ah ka baxsan ee kala duwan, bedeli cable-danab sare AC, ka dibna tag Tallaabada 5 (MY08) Step 7 (MY09).

STEP 3. Hubi sii cable a high-voltage.

  1. Barkinta cable-danab sare AC ka Inverter iyo Motor / Generator.
  2. Cabir iska caabin ah ee High-danab AC u Cable ka isku xira Inverter u Motor / Generator isku xira on kasta oo ka mid ah biinanka soo socda:
        • Pin A si Pin A
        • Pin B in Pin B
        • Pin C inay Pin C

      Note: auto-ka bilowda Waat digital ah / Ohm Meter waa in la isticmaalaa.

    • Haddii iska caabin ah ee wareeg kasta waa 1 Ohm ama ka yar, tag Tallaabada 4
    • Haddii iska caabin ah ka baxsan ee kala duwan, badalo Cable AC High-danab, ka dibna tag Tallaabada 5 (MY08) Step 7 (MY09).

STEP 4. Hubi sii cable a high-voltage.

    1. Cabir iska caabin ah ee mid kasta wajiga Motor / Generator at musmaarradii soo socda:
        • (MY08 Kaliya)
            • Pin A si Pin B
            • Pin B in Pin C
            • Pin C inay Pin A

          (MY09 Kaliya)

            • Pin C inay Pin B
            • Pin B in Pin A
            • Pin A si Pin C

          Note: auto-ka bilowda Waat digital ah / Ohm Meter waa in la isticmaalaa.

        • Haddii iska caabin ah ee marxalad kasta waa 10 ohms ama ka yar, bedeli Inverter ah, ka dibna tag Tallaabada 5 (MY08) Step 7 (MY09).
        • Haddii iska caabin ah ka baxsan ee kala duwan, bedeli Motor / Generator ah, ka dibna tag Tallaabada 5(MY08) Step 7 (MY09).

STEP 5. (MY08 Kaliya) Hubi dayactirka.

  1. Key off
  2. Xidhmaan oo dhan Xidhiidhiyayaasha iyo cable ka batari negative.
  3. Key on
  4. codes Clear
  5. Wado baabuur iyo isku dayaan in ay dib code ka.
  6. Hubi codes. Haddii codes ma, baaritaanka waa complete.
    • Haddii Babaca Code 1 u muuqataa, heli qalad in imtixaanka, tag Tallaabada 1.
    • Haddii code cusub u muuqataa, arki Khalad List Code Index.

STEP 5. (MY09 Kaliya) Hubi sii cable a high-voltage.

  1. Check the AC Cable Connectors at the motor/generator and Inverter to ensure they are properly connected:
    • Haddii xiriir yihiin dabacsan ama si fiican u xiran, xidhmaan fiilooyinka AC qayb oo taga si Tallaabada 7.
    • Haddii xiriir ma aha dabacsan oo si fiican loo xiran, tag Tallaabada 6.

STEP 6. (MY09 Kaliya) Hubi sii cable a high-voltage.

    1. Barkinta cable AC ka motor / matoor iyo Inverter.
    2. Cabir iska caabin circuit interlock ka isku xira Inverter iyo isku xira Motor / Generator at musmaarradii soo socda:
      • Pin D iyo Pin D
      • Pin E iyo Pin E
        Note: An / meter auto-ka bilowda volt digital Ohm waa in la isticmaalaa
    3. Haddii iska caabin ah waa 0-0.3 ohms, bedeli Inverter ah. Eeg saarista MY09 Inverter iyo nidaamka Rakibaadda ee TRSM2000, tag Tallaabada 7.
    4. caabin f waa ka baxsan kala duwan, replace the AC cable between the Inverter and Motor/Generator, ka dibna tag Tallaabada 7.

STEP 7. (MY09 Kaliya) Hubi dayactirka.

  1. Key off
  2. Xidhmaan oo dhan Xidhiidhiyayaasha iyo cable ka batari negative.
  3. Key on
  4. codes Clear
  5. Wado baabuur iyo isku dayaan in ay dib code ka.
  6. Hubi codes. Haddii codes ma, baaritaanka waa complete.
    • Haddii Babaca Code 1 u muuqataa, heli qalad in imtixaanka, tag Tallaabada 1.
    • Haddii code cusub u muuqataa, arki Khalad List Code Index.

Qof kasta oo gudbinta qayb aad u baahan tahay aynu u leeyihiin! maalin isku mid ah maraakiibta la heli karo, dunida oo dhan.

U BAAHAN TAAGEERO FREE KA MID khubaro OUR?

WAC NOW
email US