Eaton Fuller Code Babaca Hybrid 3 – Motor Generator Heerkulka

Khalad code for Hybrid Eaton daydo Systems Drive (MY08) Cuneyso-8E306A-U, Cuneyso-8E306A-UPG, Cuneyso-8E306A-UP, Cuneyso-8E306A-CD, Cuneyso-8E306A-T, Cuneyso-6E606B-CD, (MY09) Cuneyso-8E406A-U / P, Cuneyso-8E406A-UP, Cuneyso-8E406A-UPG, Cuneyso-8E406A-CD, Cuneyso-8E406A-CDG, Cuneyso-8E406A-guud, Cuneyso-8E406A-T, Cuneyso-6E706B-CD, Cuneyso-6E706B-P iyo aad cuneyso-6E706B-UPG. The heerkulka Motor / Generator waxaa lagu cabiraa iyada oo shidma thermistor a, oo ku yaalla gudaha qaybta. The qiimaha isbedel shidma ku saleysan heerkulka. Inverter ayaa siisa danab tixraaca 5-volt a in shidma iyo cabiraya dhibic volt ee Bannaanka ka.
Marka heerkulka Motor / Generator waa diiran iska caabin shidma ay yar tahay iyo Inverter ku ogaadaa yar-danab (0.2 volts uyeelaysaan 536 ° F [280 ° C]). Marka Motor / Generator waa qabow, caabin shidma yahay sare iyo Inverter ku ogaadaa danab sare (4.1 volts uyeelaysaan 32 ° F [0 ° C]).

khalad Code 3 Motor / Generator Ogaanshaha Heerkulka

danab suuroggalaan Inverter waa ka weyn yahay 7 volts iyo ka yar 16 volts (MY08)

Fault is detected when Inverter ignition voltage is greater than 7 volts iyo ka yar 16 volts (MY09)

Xaaladaha in Calan Babaca Code Active

Marka heerkulka Motor / Generator waa diiran iska caabin shidma ay yar tahay iyo Inverter ku ogaadaa yar-danab (0.2 volts uyeelaysaan 536 ° F [280 ° C]). Marka Motor / Generator waa qabow iska caabin shidma yahay sare iyo Inverter ku ogaadaa a high-voltage (4.1 volts uyeelaysaan 32 ° F [0 ° C ]). (MY08)

When the temperature sensor value is greater than 365 ° F (185 ° C) waayo, 1 labaad. (MY09)

Uugu Marka Babaca Code 3 ayaa lagu wadaa shuruudaha soo socda dhici:
• Amber "Check Hybrid" illuminates light.
• Babaca waxa lagu kaydiyaa Control Module Hybrid (Gudiga sare) xusuusta.
• Electric Motor/Generator Assist and Regeneration are disabled; si kastaba ha ahaatee, ee Relays a high-voltage sii powered.
• HCM continues to control the hybrid vehicle in a diesel-only mode.
• la bixin kari Gudbinta bilaabi marsho in 1aad.

Xaaladaha in Calan Babaca Code qabad la'aan

Kaliya unu qabad la'aan la nadiifiyay karaa Unit Gudbinta Electronic Control ah (TECU) ama taariikhda HCM isticmaalaya ServiceRanger. TECU ayaa si toos ah oo ansixiyay unu ka dib markii taariikhda 200 saacadood iyo HCM si toos ah oo ansixiyay unu ka soo taariikhda ka dib markii ay Wax qabad la'aan, waayo, 200 saacadood.

code qalad Tani waxaa keeni kara wax ka mid ah kuwan soo socda:

  • IMF 0 (IMF 0 ayaa lagu wadaa markii qiimaha shidma heerkulka waa ka weyn yahay 365 ° F [185 ° C] waayo, 1 labaad):
    • Inverter
    • Motor / Generator
    • nidaamka qaboojinta Liquid (coolant hooseeyo, ma socodka coolant, saar Coolant, hiitarka, hiitarka Fan, kaydka)

khalad Code 3 – Motor / Test Heerkulka Generator

Qeybta Aqoonsiga MY08 Systems:

Delphi 56-Jidka isku xira rimay View

Delphi 56-Jidka isku xira rimay View

sensor heerkulka

sensor heerkulka
(la habeeyo View – Side Front)

FIIRO GAAR AH: U dir ka Eaton Qeybta Hybrid oo isku xira Location waayo, Goobaha isku xira in Systems MY08

isku xira qayb

Qeybta Aqoonsiga MY09 Systems:

Deutsch 40-Jidka isku xira rimay View

Delphi 40-Jidka isku xira rimay View

Side terminal - La habeeyo isku xira Heerkulka sensor

Side terminal – La habeeyo isku xira Heerkulka sensor

FIIRO GAAR AH: U dir ka Eaton Qeybta Hybrid oo isku xira Location waayo, Goobaha isku xira in Systems MY09.

Eaton Fuller inverter motor/generator
digniinaha & ganaaxyada

Danger: Danger muujinaysaa aad la si xun u dhaawacmay doonaa ama la dilay haddii aadan raaci doonaa habraaca ku tilmaamay.
digniin: Digniin halis degdeg ah, taas oo keeni karta dhaawac shakhsi daran haddii aadan raaci doonaa habraaca ku tilmaamay.
digniin: Digniin muujinaysaa gaariga ama hantida dhaawac dhici kara haddii aadan raaci doonaa habraaca ku tilmaamay.

Note: Note muujinaysaa faahfaahin dheeraad ah u gargaartaan in cudurka ama dayactir ah component / Nidaamka.

Raac hannaanka ku qeexan amarka tilmaamay in ay ka fogaadaan dhaawac shakhsi ahaaneed:

1. Haddii loo yaqaano a high-voltage yihiin hareeraha baabuurka iyo ka joojinta la geliyo PEC ah, qofka kaliya ee la ogol yahay waa in ay u bilaabaan gaariga uu yahay qofka saxiixay tag joojinta.
2. Ka hor inta shaqeeya on gaari ama ka soo baxaya cab halka engine la socda, waa in aad meel lever wareeg ee "N" dhigay jejebiyey la dhigto, iyo xannibi giraangirihiina.
3. Sababo nabadgelyo, had iyo jeer ka qayb biriiga adeegga ka hor doorashada jagooyinka marsho ka "N."
4. Ka hor inta aadan bilaabin gaari had iyo jeer la fadhiya kursiga darawalka, dooro "N" on gacanta ku wareejin ah, oo qarka u saaran biriiga la dhigto.
5. In baabuurta la ePTO, engine iyo / ama
Motor / Generator bilaabi kartaa in hab ePTO. Marna qabtaan dayactirka ama shaqeeyaan gaadiidka, halka hab this.
6. 12-Waat Battery wanaagsan (+) iyo negative (-) waa in la hor ineysan si alxanka kasta oo gaari kasta Hybrid qalabaysan.

digniin: Raac hannaanka ku qeexan amarka tilmaamay in ay ka fogaadaan cillad qalabka ama dhaawac.
digniin: Ha sii daayo jejebiyey la dhigto ama isku dayaan in ay doortaan marsho ilaa cadaadiska hawada waa heerka saxda ah.
digniin: Si looga fogaado waxyeelo ay ku gudbinta lagu jiro jiidaya meesha lever wareeg ee "N" oo kor u giraangiraha drive ka off dhulka ama barkinta driveline ah.

Digniinaha High-danab & ganaaxyada

  • Isticmaal CO2 ama qallalan Chemical Dab bakhtiiyeyaasha.
  • The taararka a high-voltage waxaa daboolay ningax orange ama tubbada convoluted iyo sumadaha digniin at Xidhiidhiyayaasha ku calaamadsan.
  • All Hybrid Eaton® Diesel / baabuurta Electric waxaa la qorayaa 'Hybrid’ dibaddeeda oo gaariga, oo ay la socdaan calaamad wareejin on dumisaan ah.
  • U dir ka OEM meel gaarka ah ee jiifku Jaha qaybaha hybrid.
  • HA jarjar ah fiilooyinka a high-voltage orange.
  • HA jarjar ama furo PEC ah.
  • HA jarjar ama furo Converter DC / DC.
  • HA jarjar ama furo Inverter ah.

aag-dhuleed A waa in kor loo dhigay iyo high-voltage dahaaran gacno gashi rabar (fasalka 0 la sokeeye maqaar) waxaa loo baahan yahay ka hor inta aan la shaqeeyo on a high-voltage. Dhicitaanka in la raaco tilmaamaha keeni kartaa in dhaawac shakhsi aad u daran ama dhimasho.
gacmo gashi The caag-dahaaran tahay in la xirto, halka ka shaqeeya nidaamka a high-voltage yihiin fasalka 0 la sokeeye maqaar. gacno gashi rabar ah waa in la baaro inta aan la isticmaalin KASTA socda nidaamka caag imtixaanka gashi ningax laga helay "Tools Baarista / Publications Service" ee bogga 6. Dhicitaanka in la raaco tilmaamaha keeni kartaa in dhaawac shakhsi aad u daran ama dhimasho.
Ka hor baarista ama ka shaqeeya fiilooyin a high-voltage ama qaybaha "Habka Adeegga xiritaanka High-danab iyo Power Up-" ee bogga 4 Waa in la raaco. Dhicitaanka in la raaco tilmaamaha keeni kartaa in dhaawac shakhsi aad u daran ama dhimasho.
The qalabka Shaqoxannibista iyo Tagout waa saaro kaliya farsamo yaqaan ah in kaalinta qalabka Shaqoxannibista iyo Tagout on gaariga. Dhicitaanka in la raaco tilmaamaha keeni kartaa in dhaawac shakhsi aad u daran ama dhimasho.
High-danab gacno gashi rabar dahaaran (fasalka 0 la sokeeye maqaar) waa in la gashanaadaa markuu ka shaqeeya kasta
fiilooyinka a high-voltage. The "xiritaanka High-danab Service iyo Power Up-Habka" ee bogga 4 waa in la hor raacay in ay ka saareen wax fiilooyinka a high-voltage. Dhicitaanka in la raaco tilmaamaha keeni kartaa in dhaawac shakhsi aad u daran ama dhimasho.
fiilooyinka High-danab iyo xarkaha waa orange iyo waxa ku jira qoran calaamadda digniinta ee Xidhiidhiyayaasha ah. qaybaha High-danab waxaa lagu calaamadeeyay leh calaamadda a. High-danab gacno gashi rabar dahaaran (fasalka 0 la sokeeye maqaar) waa in la isticmaalaa marka ka shaqeeya mid ka mid ah qaybaha kuwaas oo. Dhicitaanka in la raaco tilmaamaha keeni kartaa in dhaawac shakhsi aad u daran ama dhimasho.

Nidaamka High-danab xiritaanka Service

Xiritaanka Service High-danab iyo Habka Power Up-1. Raac "High-danab Work Area" nidaamka.
2. Hel ka Switch Service PEC cas on hore ee PEC iyo riixdo demiso.
3. Ka saar Cover Switch Service iyo rakibi qaybta ka joojinta (J48506).
4. tag giijin in qaybta ka joojinta.
5. Hubi in ay Switch Service PEC aan ka booska off dhaqaajin karin.
6. U ogolow nidaamka si ay u dejiyaan ugu yaraan 5 daqiiqo oo ay u guto danab sare.
7. Connect ServiceRanger iyo u arkaan Monitor Data PID 116 loo yaqaan "fili karo Battery High-danab." Isticmaalka SPN 520323 waayo xidhiidh J1939 "Battery danab RB" (Relay Box).
8. danab waa in uu noqdo 30 volts ama ka yar. Haddii danab ku xusan yahay 30 volts, uma shaqeeyaan on gaariga iyo xiriiri Eaton® ee 1-800-826-HELP (4357).
9. muhiim ah ka suuroggalaan Dami iyo sii wadi in lagu dhiso ama tallaabo dhib.
Note: danab ugu dhaco, si eber markii fure u off waa.

High-danab Service Power Up-Habka

1. Ku rakib dhan Xidhiidhiyayaasha a high-voltage galay ay qufulan.
2. Haddii aad tahay qof ka shaqeeya on gaariga, ka saar qaybta ka joojinta iyo tag.
3. Dib qaybta ka joojinta badan Switch Service.
4. Jiid Adeegga beddelo baxay oo ha set baabuurta 2 daqiiqo.
5. gaari bilow marka ay habboon tahay.

Eaton Qeybta Hybrid oo isku xira Location

Eaton Qeybta Hybrid iyo Goobaha isku xira MY08 Systems

Eaton Qeybta Hybrid oo isku xira Location MY09 Systems

Eaton Qeybta Hybrid iyo Goobaha isku xira MY09 Systems

STEP 1. Hubi xaaladda code qalad Active ama qabad la'aan.

  1. Dib u eeg oo raaca digniinaha & ganaaxyada.
  2. Ceshano codes qalad Active iyo FMIs la ServiceRanger isticmaalaya Baarista 9-Jidka isku xira.
    digniin: Eeg Deminta Adeegga Voltage-sare iyo Nidaamyada Kor-u-qaadista. Raac habraaca si looga fogaado filaan ah, gubaan ama dhimasho ka khaldan u maareeyeen a high-voltage.
  3. Key on.
  4. Find initial temperature by selecting the “Data Monitor” option and view PID 113 “Motor/Generator Temperature” in the “Power Electronics” list.
  5. view PID 113 mar kale ka dib markii 20 daqiiqo:
    • Haddii PID 113 "Motor / Generator Heerkulka" hoos ka reading ugu horeysay, tag Tallaabada 2.
    • Haddii PID 113 "Motor / Heerkulka Generator" hadhay isku mid, tag Tallaabada 8.

STEP 2. Hubi heerka nidaamka coolant hybrid.

  1. Key off.
  2. La soco marka heerka coolant ka dib markii nidaamka ayaa qaboojiyey si loo hubiyo in haddii loo buuxiyey heerka ku habboon:
    • Haddii coolant waa xadka lagu taliyay, tag Tallaabada 3.
    • Haddii coolant ka hooseeyo xadka lagu taliyay, tixraac OEM ee nooca coolant iyo buuxiyo nidaamka. Hubi il of dillaac coolant. When refilling the system it should be pressurized or vacuum bleed of air to ensure the coolant flows properly during normal operation.

STEP 3. Hubi daacad ah qaybaha nidaamka qaboojinta hybrid.

  1. Key off
  2. Arag baadho hiitarka hybrid dareere nidaamka qaboojinta, waayo burburka, xirma in hawada, ama qallooca af khadadka coolant ah:
    • Haddii hiitarka waa free of qashin iyo khadadka coolant la soo maratay xootay, tag Tallaabada 4.
    • Haddii hiitarka leeyahay burburka, hawada ah la dhexgalo, ama khadadka coolant waxaa soo maratay xootay, cusboonaysiiyo walaac ah, ka dibna tag Tallaabada 10.

STEP 4. Hubi hawlgalka saar Coolant hybrid.

  1. Key on.
  2. Connect ServiceRanger u xira 9-Way ku cab ah.
  3. Dooro Functions Product Advanced xulashada iyo dooro ikhtiyaarka "Qaboojinta saar".
  4. In loo sahlo xulashada "qaboojinta saar":
    • Haddii saar Coolant jirsado on, tag Tallaabada 5.
    • Haddii saar Coolant uusan shid, tag Tallaabada 6.

STEP hawlgalka 5.Verify ee hybrid Heat Iskubedelka Fan.

  1. Dooro Functions Product Advanced xulashada iyo dooro "Heat Iskubedelka Fan" option.
  2. In loo sahlo xulashada Heat Iskubedelka Fan:
    • Haddii Iskubedelka Heat ee Fan sano, nidaamka loo baahan yahay in la nadiifiyey hawada, jidaynayey coolant in ay soo qulquli. Dhiig hawada iyadoo la isticmaalayo qalab cadaadis nidaamka coolant ama qalab vacuum ah, ka dibna tag Tallaabada 10.
    • Haddii Iskubedelka Heat ee Fan ma shid, tag Tallaabada 8.

STEP 6. Hubi danab at saar Coolant hybrid.

  1. Key on.
  2. Barkinta ka Coolant saar 2-jidka isku xira.
  3. Dooro "Function Products Advanced" doorasho iyo dooro "qaboojinta saar."
  4. In loo sahlo xulashada "qaboojinta saar":
  5. danab Cabbirka at 2-jidka isku xira ka Pin A si Pin B:
    • Haddii danab dhexeeya Pin A iyo B Pin waa ± 0.2 volts ee danab batari, tixraac OEM walaac saar Coolant.
    • Haddii danab dhexeeya Pin A iyo B Pin waa ka baxsan kala duwan, tixraac OEM waayo nidaamka dayactirka on qaboojinta saar Power la habeeyo ama fiyuus dhaawacan.

STEP 7.Verify danab ee hybrid Heat Iskubedelka Fan.

  1. Key on.
  2. Disconnect the Heat Exchanger Fan 2- jidka isku xira.
  3. Dooro "Products Advanced Function" doorasho iyo dooro "Heat Iskubedelka Fan."
  4. In loo sahlo xulashada Heat Iskubedelka Fan:
  5. danab Cabbirka at 2-jidka isku xira ka Pin A si Pin B:
    • Haddii danab dhexeeya Pin A iyo B Pin waa ± 0.2 volts ee danab batari, tixraac OEM walaac Heat Iskubedelka Fan.
    • Haddii danab dhexeeya Pin A iyo B Pin waa ka baxsan kala duwan, tixraac OEM waayo nidaamka dayactirka on Heat Iskubedelka Fan Power la habeeyo ama fiyuus dhaawacan.

STEP 8. Hubi sii circuitry Inverter.

  1. Key off.
  2. Barkinta Inverter ee 56-Jidka isku xira.
  3. Dooro "Function Products Advanced" doorasho iyo dooro "qaboojinta saar."
  4. Measure resistance between Pin 38 iyo Pin 50(MY08) / 36 & 37 (MY09) iyo Pin 50 (MY08) / 37 (MY09) si ay dhulka ee Inverter ee 56-Jidka isku xira.
    • Haddii iska caabin ah waa 0.8K-301.7K ohms dhexeeya Pin 50 iyo Pin 38 iyo iska caabin ah oo u dhexeeya Pin 50 iyo dhulka waa 10km ohms ama ka weyn, bedeli Inverter ah, ka dibna tag Tallaabada 10.
    • Haddii iska caabin ah ka baxsan kala duwan ee, tag Tallaabada 9.

STEP 9.Verify sii Heerkulka sensor circuit.

  1. Key off.
  2. Barkinta ka Motor / Generator sensor Heerkulka 2-jidka isku xira ku yaal dhinaca midig ee Motor / Generator ah.
  3. Measure resistance between the 2-Way Temperature Sensor Connector from Pin A to Pin B (MY08) / pin 1 in Pin 2 (MY09) :
    • Haddii iska caabin ah waa 0.8K-301.7K ohms, repair the shorted HCM System Harness between the Inverter Connector and Motor/Generator 2-Way Connector.
    • Haddii iska caabin ah ka baxsan kala duwan ee, bedeli Motor / Generator ah, ka dibna tag Tallaabada 10.

STEP 10.Verify dayactirka.

  1. Key off.
  2. Dib isugu xir dhammaan xiriiriyeyaasha iyo xarkaha batteriga taban.
  3. Key on.
  4. codes Clear, arki Unu qabad la'aan Clear.
  5. Wado baabuur iyo isku dayaan in ay dib code ka.
  6. Hubi codes, arki View unu Active iyo Wax qabad la'aan.
    • Haddii codes ma, baaritaanka waa complete.
    • Haddii Code qalad 3 u muuqataa, heli qalad in imtixaanka, tag Tallaabada 1.
    • Haddii code kale oo aan ahayn 3 u muuqataa, arki Khalad List Code Index.

Qof kasta oo gudbinta qayb aad u baahan tahay aynu u leeyihiin! maalin isku mid ah maraakiibta la heli karo, dunida oo dhan.

U BAAHAN TAAGEERO FREE KA MID khubaro OUR?

WAC NOW
email US