Eaton Fuller Code Babaca Hybrid 14 – Baadil Shifter Range

Khalad code for Hybrid Eaton daydo Systems Drive (MY08) Cuneyso-8E306A-U, Cuneyso-8E306A-UPG, Cuneyso-8E306A-UP, Cuneyso-8E306A-CD, Cuneyso-8E306A-T, Cuneyso-6E606B-CD, (MY09) Cuneyso-8E406A-U / P, Cuneyso-8E406A-UP, Cuneyso-8E406A-UPG, Cuneyso-8E406A-CD, Cuneyso-8E406A-CDG, Cuneyso-8E406A-guud, Cuneyso-8E406A-T, Cuneyso-6E706B-CD, Cuneyso-6E706B-P iyo aad cuneyso-6E706B-UPG. The Unit Gudbinta Electronic Control (TECU) waxaa ku xiran qalab shaqada, oo gudbiya xogta doorashada hab darawalka. The qalabka wareejin socon oo keliya waa loosoo Control Shift Button ah Eaton® (PBSC) iyo OEM-bixisey lever wareeg (haddii qalabaysan park). TECU The hubinaysaa gaariga nooca qalab wareejin inta lagu jiro kor ugu horeysay ee awoodda.

khalad Code 14 – Baadil Shifter Range Ogaanshaha

The shuruud soo socda waa in la buuxiyaa ka hor inta nidaamka ogaadaa gardarrada:

  • TECU danab suuroggalaan waa ka weyn yahay 7 volts iyo ka yar 16 volts.
  • System TECU Battery Low danab Babaca waa qabad la'aan.
  • TECU la shaqeeya ilaa markii ugu horeysay oo qalab wareejin lahayn ayaa loo qaybiyay.

Xaaladaha in Calan Babaca Code Active

  • IMF 2 ayaa lagu wadaa markii shifter uusan ka soo laabtay booska sax ah (PRNDH1)
  • IMF 3 ayaa lagu wadaa markii danab shidma uu ka badan yahay filayaa
  • IMF 4 ayaa lagu wadaa markii danab shidma yahay hoose intii la filayay

Uugu Marka Babaca Code 14 ayaa lagu wadaa shuruudaha soo socda dhici:

  • An "F" u muuqataa in qaab marsho ah.
  • Gaf waxa lagu kaydiyaa xasuusta TECU.
  • TECU badala inay gacanta ku AutoShift.
  • Engine ma kumbyuutarradeedu.

Xaaladaha in Calan Babaca Code qabad la'aan

Kaliya unu qabad la'aan la nadiifiyay karaa Unit Gudbinta Electronic Control ah (TECU) ama taariikhda HCM isticmaalaya ServiceRanger. TECU ayaa si toos ah oo ansixiyay unu ka dib markii taariikhda 200 saacadood iyo HCM si toos ah oo ansixiyay unu ka soo taariikhda ka dib qalad uu Wax qabad la'aan, waayo, 200 saacadood.

code qalad Tani waxaa keeni kara wax ka mid ah kuwan soo socda:

  • IMF 2
    • Shifter waa in u dhexeeya boosaska detent ama shidma waa out of dhaqmaan.
  • IMF 3
    • aqbasho Hall-Saamaynta sensor waxaa shorted sare ama shidma dhulka ku furan.
  • IMF 4
    • Hall-Effect Sensor input is open circuit or shorted to ground.

khalad Code 14 – Range Test aan saxnayn Shifter

Aqoonsiga Qeybta:

Harness Front View TECU - Vehicle Interface Connector

La habeeyo Front View
TECU – Vehicle Wajahadda isku xira

4-way Park Pawl Actuator Connector

4-Jidka Park Pawl leewarka
isku xira

FIIRO GAAR AH: U dir ka Eaton Qeybta Hybrid oo isku xira Location waayo, Goobaha isku xira in Systems MY08

FIIRO GAAR AH: U dir ka Eaton Qeybta Hybrid oo isku xira Location waayo, Goobaha isku xira in Systems MY09.

Eaton TECU Park Pawl Actuator

STEP 1. Hubi danab siin at Lever Shift.

  1. Dib u eeg oo raaca digniinaha & ganaaxyada.
  2. Disconnect the 4-Way Connector to the Park Pawl Actuator.
  3. Key on.
  4. Hubi sahayda 12-volt ee 4-Jidka isku xira ee Pin 1 iyo Pin 2:
    • (MY08) Haddii danab dhexeeya Pin 1 iyo Pin 2 waa ± 0.2 volts ee danab batari, tag Tallaabada 2.
    • (MY09) Haddii danab dhexeeya Pin 1 iyo Pin 2 is between 8–14 volts of battery voltage, tag Tallaabada 2.
      • Haddii danab ka baxsan kala duwan ee, tag Tallaabada 4.

STEP 2. Hubi danab ee Lever Shift meel dhex-dhexaad ah.

  1. 1. Iyada oo leewarka / wareejin Lever in dhex-dhexaad ah, hubi danab on musmaarradii soo socda:
    • pin 3 si ay dhulka
    • pin 4 si ay dhulka
      • If voltage is between 2.25–2.75, tag Tallaabada 3.
      • Haddii danab ka baxsan kala duwan ee, bedeli shidma Hannaanka Park Pawl, ka dibna tag Tallaabada 5.

Hubi Step.3 sii TECU la habeeyo.

  1. Disconnect the TECU Vehicle Harness 38- jidka isku xira.
  2. Hubi joogtada u dhaxaysa:
    • 38-Jidka isku xira Pin 15 iyo 4-Jidka isku xira Pin 4
    • 38-Jidka isku xira Pin 16 iyo 4-Jidka isku xira Pin 3
    • Haddii sii dhamaato, bedeli Unit Gudbinta Electronic Control ah (TECU), ka dibna tag Tallaabada 5.
    • Haddii furan waxaa laga helaa, cusboonaysiiyo la habeeyo Vehicle ah, ka dibna tag Tallaabada 5.

STEP 4. Hubi sii TECU la habeeyo.

  1. Disconnect the TECU Vehicle Harness 38- jidka isku xira.
  2. Hubi joogtada u dhaxaysa:
    • 38-Jidka isku xira Pin 17 iyo 4-Jidka isku xira Pin 1
    • 38-Jidka isku xira Pin 31 iyo 4-Jidka isku xira Pin 2
  3. Haddii sii dhamaato, bedeli Unit Gudbinta Electronic Control ah (TECU), ka dibna tag Tallaabada 5.
  4. Haddii furan waxaa laga helaa, cusboonaysiiyo la habeeyo Vehicle ah, ka dibna tag Tallaabada 5.

STEP 4. Hubi dayactirka.

  1. Key off.
  2. Xidhmaan oo dhan Xidhiidhiyayaasha.
  3. Key on.
  4. codes Clear, arki Unu qabad la'aan Clear.
  5. Wado baabuur iyo isku dayaan in ay dib code ka.
  6. Hubi codes, arki View unu Active iyo Wax qabad la'aan.
    • Haddii codes ma, baaritaanka waa complete.
    • Haddii code qalad 14 u muuqataa, heli qalad in imtixaanka, tag Tallaabada 1.
    • Haddii code kale oo aan ahayn 14 u muuqataa, arki Khalad List Code Index.

Qof kasta oo gudbinta qayb aad u baahan tahay aynu u leeyihiin! maalin isku mid ah maraakiibta la heli karo, dunida oo dhan.

U BAAHAN TAAGEERO FREE KA MID khubaro OUR?

WAC NOW
email US